http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
천층터널 주변의 흐름거동 및 수치 해석적 모델링기법 연구
신종호,최민구,강소라,남택수,Shin, Jong-Ho,Choi, Min-Gu,Kang, So-Ra,Nam, Taek-Soo 한국터널지하공간학회 2008 한국터널지하공간학회논문집 Vol.10 No.1
터널 설계 및 시공시 지하수 영향에 대한 정확한 이해가 필요하며, 이를 위해 터널 주변의 흐름거동을 파악하는 것이 중요하다. 본 연구에서는 지하수 아래 건설된 배수형 천층터널에 대한 모형실험을 실시하여 주변 지하수 흐름조건과 지반의 토피고에 따른 터널 주변의 지하수 흐름거동을 조사하였다. 실험결과 정상류/부정류의 지하수 흐름조건은 터널내 유입량이나 도달시간에는 영향을 미칠 수 있으나, 터널 주변 흐름거동에는 큰 영향을 미치지 못함을 확인할 수 있었다. 또, 토피고가 증가할수록 배수공이 위치한 터널 하부로의 유선 집중현상이 뚜렷하게 관찰되었다. 모형실험에 대한 수치해석결과, 배수형 천층터널 주변의 흐름거동을 수치해석으로도 재현 가능함을 확인하였다. 배수형 천층터널의 경우 수리경계조건이 터널주면 유출이 아닌 배수공 유출로 모사하는 것이 보다 타당함을 보였다. Design and construction of tunnels require understanding the influence of groundwater. Particularly, it is essential to know how the drainage conditions at the tunnel boundary affect flow behavior of ground adjacent to the tunnels. In this study flow behavior of a leaking tunnel was investigated using physical model tests for tunnel depths and various hydraulic boundary conditions. Particular concerns were given to flow lines toward tunnels. Test results showed that the boundary conditions hardly influence on flow patterns and time required to reach steady state conditions. It is revealed that with an increase in water depth, flow lines concentrated to the drain holes. The physical tests were numerically simulated. Numerical results showed that the flow behavior was represented appropriately by considering filter-drain hole drainage rather than boundary drainage all over the lining.
신종호,권오엽,조재완,최민구,Shin, Jong-Ho,Kwon, Oh-Yeob,Cho, Jae-Wan,Choi, Min-Gu 한국터널지하공간학회 2005 터널기술 Vol.7 No.3
지하공간의 설계는 막장파괴와 관련한 안정성에 대한 평가를 필요로 한다. 막장파괴모드는 전통적인 안정성 평가법에서 중요하게 다루어져 왔다. 본 연구에서는 점착력이 없는 토사지반에 대한 모형실험을 실시하여 토피고와 지반경사의 변화에 따른 터널막장의 종방향 파괴모드를 파악하고자 하였다. 모형실험은, 대형지하공간의 폭원이 충분히 크다는 가정 하에 평면변형조건의 터널 축방향 굴착면 모델에 대하여 실시되었다. 실험결과 토피고와 지반경사는 파괴모드에 중요한 영형을 미치는 것으로 나타났다. 토피고가 증가할수록 지반의 파괴영역이 감소하여 국부 전단 파괴의 형태를 보였다. 또, 지반경사가 증가할수록 굴착면과 사면방향으로 확대되는 유형의 파괴모드를 확인할 수 있었다. 실험모델을 수치해석 모델로 재현하는 해석을 실시하였고, 이로부터 수치해석법을 통해서도 굴착면의 파괴모드의 추정이 가능함을 보였다. Design analysis for underground spaces requires evaluating stability related to heading collapses. A failure mode is one of the critical factors in the conventional methods of stability evaluation. Identification of failure modes is, therefore, essential in securing safe construction. In this study failure modes at the tunnel heading in cohesionless soils are investigated using physical model tests for various tunnel depths and ground surface inclinations. Test results showed that the effect of depth and the inclination of ground surface on a failure mode are of significance. It is identified that, with an increase in depth, failure modes become localized in a region close to tunnel face. It is also known that an increase in the inclination of ground surface results in inclined an d wide failure modes. Numerical simulation of laboratory tests was performed, and shown that the numerical analysis is useful in identifying the heading failure modes, particularly for large underground spaces.