http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
혼합법칙을 이용한 황동 개재물이 있는 Al 정사각판의 고유진동수 해석
이윤복,이세훈,이영신,Lee, Youn-Bok,Lee, Se-Hoon,Lee, Young-Shin 한국전산구조공학회 2006 한국전산구조공학회논문집 Vol.19 No.4
황동 개재물이 있는 Al 정사각판의 고유진동수는 혼합법칙을 이용하여 해석되었다. 혼합법칙에 의한 고유진동수는 개재물의 크기에 따른 유효 내평면 파동속도와 무차원 진동수 매개변수와의 곱으로 이루어진다. 해석모델은 외팔형, 2변 고정-2변 자유형, 3변 고정-1변 자유형 및 4변 고정형의 황동 개재물이 있는 4가지의 Al판이다. 자유단이 1개 이상 존재하는 경계조건에서 개재물이 판의 중앙에 위치하였을 때 개재물에 대한 판 전체의 면적비가 1/9 이하이면 혼합법칙 및 유한요소 해석에 의한 고유진동수는 10% 이내로 잘 일치하였다 4변 고정형 경계조건을 제외하고 3가지 경계조건에서 개재물이 판중앙에 있을 경우 개재물의 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 낮아짐을 알았다. 또한 개재물의 밀도가 판의 밀도보다 작을 때, 개재물 크기가 커짐에 따라 개재물이 있는 판의 고유진동수는 높아진다. The natural frequencies of Al square plates with a brass inclusion were analyzed by the rule of mixtures. The rule of mixtures is the method to derive natural frequency mutiplying effective inplane wane speed and nondimensional frequency parameters. Numerical models were Al square plates with an inclusion with cantilever type, 2 clamped edge-2 free edge type, 3 clamped edge-1 free edge type and fully clamped edge type. In cantilever type plates, 2 clamped edge-2 free edge type plates and 3 clamped edge-1 free edge plates with an inclusion, good agreement within 10% obtained from rule of mixtures' results and numerical analysis results within inclusion area ratio 1/9. It was found that the natural frequencies of the cantilever type, 2 clamped edge-2 free edge type and 3 clamped edge-1 free edge type plates with an inclusion decrease as the size of inclusion increases when inclusion is located center of plates. And when the density of inclusion is less than the plates, natural frequency of plates with an inclusion increases as the size of inclusion increases.
M10CN전자교환기 상태천이 Table의 재구성에 대한 연구
이윤복,김현우,Lee, Yun-Bok,Kim, Hyeon-U 한국전자통신연구원 1983 전자통신 Vol.5 No.4
Sine call handling for stored program control exchange can be regarded as finite state machine model of sequential process, the state transition concept is applied to describe its functions. Coding method of the state transition table applied to M10CN ESS call processing and concerned topics was discussed and proposed another method for reduction memory usage.
SHS법에 의한 붕화지르코늄의 합성 및 치밀화에 미치는 첨가제의 영향
이윤복,곽철상,김상배,김영우,박홍채,오기동,Lee, Yun-Bok,Gwak, Cheol-Sang,Kim, Sang-Bae,Kim, Yeong-U,Park, Hong-Chae,O, Gi-Dong 한국재료학회 1998 한국재료학회지 Vol.8 No.7
ZrO2, B2O3 및 AI을 사용하여 SHS법에 의한 붕화지르코늄을 합성을 하고 산화철과 알루미늄 분말의 첨가가 합성물의 치밀화에 미치는 영향에 대하여 검토하였다. 합성물중에 존재하는 결정상은 대부분이 ZrB2와 $\alpha$-AI2O3상이었다. 산화붕소와 알루미늄의 몰비가 1.0:3.3이상일 때 합성물의 치밀화는 크게 증가하였고, ZrB2 입자도$\alpha$-AI2O3용융상과 더불어 조대하였다. 산화철 1목에 대하여 알루미늄을 1-3몰을 첨가한 것과 산화철 1.5몰에 대하여 알루미늄을 3몰 첨가시 $\alpha$-AI2O3를 중심으로하는 슬라그상으로부터 용융상의 분이가 가능하였고, 이들 용융상에 존재하는 결정상은 ZrB2이외에 Fe, Fe2B, Zr2Fe상이었다. 용융상의 상대밀도는 산화철 1몰에 대하여 알루미늄을 1몰 첨가시 83.2%인 반면에 그 이상의 첨가량에 대해서는 치밀화는 크게 증가하여 알루미늄을 3몰 첨가한 경우 상대밀도는 93.7%로서 최대를 나타내었다.
Fabrication of $\textrm{ZrB}_2$ by SHS Process and Reaction-bonded $\textrm{ZrB}_2$-ZrC Composite
이윤복,김정섭,김상배,박홍채,오기동,Lee, Yun-Bok,Kim, Jeong-Seop,Kim, Sang-Bae,Park, Hong-Chae,O, Gi-Dong Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.1
$ZrB _2$ was prepared from a mixture of $ZrO_2$, $B_2$$O_3$and Mg by SHS method. The combustion products were successfully obtained from a mixture of $Zro_2$:$B_2$$O_3$:Mg=1:2.0:8.5(molar ratio). MgO, by-product, was removed to 92.7% by leaching with 1M HCl solution at 9$0^{\circ}C$, for 10 hours. After leaching, the mean particle size of the resultant $ZrB_2$powders was 23.6$\mu\textrm{m}$. $ZrB_2$-ZrC composite was suitably obtained from a mixture of C/Zr=1.2 molar ratio by arc-melting method. The density of arc-melted specimen increased by adding excess zirconium content(x). The bulk density was 6.17g/㎤ for x=0, and 6.37g/㎤ x=4. Vickers hardness of arc-melted specimen was /$1290kg\textrm{mm}^2$ for x=0, and fracture toughness increased to 4.2MPa.m\ulcornerforx=4 compared to 3.4MPa.m\ulcornerfor x=0.