http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고강도 콘크리트 보에서 Tension Stiffening 모델을 이용한 실험적 연구 및 평가
신대환,조은선,김민숙,김희철,이영학,Shin, Dae Hwan,Jo, Eunsun,Kim, Min Sook,Kim, Heechuel,Lee, Young Hak 한국전산구조공학회 2014 한국전산구조공학회논문집 Vol.27 No.1
강도 한계상태 설계에서는 균열이 일어난 이후 철근콘크리트 부재의 인장영역에서 철근이 모든 인장력을 부담하는 것으로 가정한다. 그러나 균열 사이의 콘크리트가 실제 콘크리트 부재에서는 특히 사용하중 수준에서의 어느 정도의 인장 응력을 견디는데, 일조 하는 것으로 보고 있다. 이러한 효과를 Tension stiffening 효과라 한다. 본 연구에서는 Tension stiffening 모델과 고강도 철근 콘크리트 보의 휨 실험결과의 비교를 통해 해석모델의 유효성을 평가 하고자 한다. 이를 통해 선정 된 6가지의 Tension stiffening 모델과 실험에 의한 모멘트-곡률, 하중-처짐등을 관계를 평가하였다. 실험결과 설계기준에서는 ACI 318이 Tension stiffening 모델에서는 Owen & Damjanic이 실험 값과 가장 적은 오차율을 보이며 높은 신뢰도를 보였다. In strength limit states design, it is assumed that after cracking, reinforcement carries all tension in the tension zone of reinforced concrete members. However, it can be seen the concrete between cracks will contribute to carrying a part of the tension stress in actual concrete members particularly at service load levels, this effect is referred as tension stiffening effect. In this study, tension stiffening models and high strength concrete beam flexural test results were verified through comparison. The relationship between moment-curvature and load-deflection was evaluated by result of tension stiffening model and test result values. The analysis results showed that ACI 318 and Owen & Damjanic generally shows good agreement.
BIPV시스템을 적용한 CLT 목조주택에서 PCM의 발전영향 및 건물에너지 평가
신대환(Dae Hwan Shin),윤범열(Beom Yeol Yun),강석구(Seog-Goo Kang),김종훈(Jong Hun Kim),김수민(Sumin Kim) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
본 연구는 국내 CLT(Cross Laminated Timber) 목조주택에서 BIPV시스템 및 PCM을 적용하였을 때 건물에너지 절감효과 및 PV 발전효율 개선을 평가하였다. BIPV시스템은 PV의 발열로 인해 건물에 추가적인 열부하가 발생하게 되는데 이를 개선하기 위해 PV와 외벽사이에 PCM(Phase Change Material)을 적용하였다. PCM을 적용하였을 때 축열효과를 이용한 냉방부하 감소와 PV의 발열을 제어하여 PV 발전효율이 상당부분 개선되는 것으로 분석되었다. 건물에너지 측면에서 PCM은 여름철 냉방부하는 감소하고 겨울철 난방부하는 증가하여 총에너지에서는 아주 미세하게 증가하는 모습을 보이지만 PV의 발전효율 개선을 통해 이는 충분히 상쇄될 수 있는 것으로 평가하였다.
흰쥐에서 이부프로펜 리신염의 물리화학적 특성 및 약물동태에 관한 평가
신대환(Dae Hwan Shin),김시현(Si Hyun Kim),박승혁(Seong Hyeok Park),김태성(Tai Sung Kim),한건(Kun Han),정연복(Youn Bok Chung),조한준(Han Jun Jo) 大韓藥學會 2011 약학회지 Vol.55 No.3
Two types of water soluble lysine salts of ibuprofen were prepared and evaluated. Physicochemical properties for ibuprofen-l-lysinate (IBL-l), ibuprofen-dl-lysinate (IBL-dl) and ibuprofen (IB) were studied on melting point, specific ratation, UV spectra and 1H-NMR spectra. There were not differences between IBL-dl and IBL-l in UV spectra and 1H-NMR spectra. The pharmacokinetic parameters of IB were compared to those of its lysine salts (IBL-l and IBL-dl) after i.v. or oral administration at the dose of 50 mg/kg (calculated as IB). Total body clearance (CLt) and area under the plasma concentration-time curve (AUC) were not different between IB group and IBL groups after i.v. administration. On the other hand, IBL-l and IBL-dl produced peak plasma concentrations (Cmax) significantly ealier and higher than IB. Time to reach peak concentration (Tmax) after IBL administration was lower than that after IB administration. There was no difference in AUC across all different groups (IB, IBL-l and IBL-dl) after oral administration. However, absorption rate constant (ka) of IBL-l and IBL-dl were significantly increased than that of IB. These results indicated that the administration of IBL-l and IBL-dl may be advantageous if rapid and reliable onset of pain relief is required.
BIPV시스템을 적용한 CLT 목조주택에서 PCM의 발전영향 및 건물에너지 평가
신대환(Dae Hwan Shin),윤범열(Beom Yeol Yun),강석구(Seog-Goo Kang),김종훈(Jong Hun Kim),김수민(Sumin Kim) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
본 연구는 국내 CLT(Cross Laminated Timber) 목조주택에서 BIPV시스템 및 PCM을 적용하였을 때 건물에너지 절감효과 및 PV 발전효율 개선을 평가하였다. BIPV시스템은 PV의 발열로 인해 건물에 추가적인 열부하가 발생하게 되는데 이를 개선하기 위해 PV와 외벽사이에 PCM(Phase Change Material)을 적용하였다. PCM을 적용하였을 때 축열효과를 이용한 냉방부하 감소와 PV의 발열을 제어하여 PV 발전효율이 상당부분 개선되는 것으로 분석되었다. 건물에너지 측면에서 PCM은 여름철 냉방부하는 감소하고 겨울철 난방부하는 증가하여 총에너지에서는 아주 미세하게 증가하는 모습을 보이지만 PV의 발전효율 개선을 통해 이는 충분히 상쇄될 수 있는 것으로 평가하였다.
BIPV시스템을 적용한 CLT 목조주택에서 PCM의 발전영향 및 건물에너지 평가
신대환(Dae Hwan Shin),윤범열(Beom Yeol Yun),강석구(Seog-Goo Kang),김종훈(Jong Hun Kim),김수민(Sumin Kim) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
본 연구는 국내 CLT(Cross Laminated Timber) 목조주택에서 BIPV시스템 및 PCM을 적용하였을 때 건물에너지 절감효과 및 PV 발전효율 개선을 평가하였다. BIPV시스템은 PV의 발열로 인해 건물에 추가적인 열부하가 발생하게 되는데 이를 개선하기 위해 PV와 외벽사이에 PCM(Phase Change Material)을 적용하였다. PCM을 적용하였을 때 축열효과를 이용한 냉방부하 감소와 PV의 발열을 제어하여 PV 발전효율이 상당부분 개선되는 것으로 분석되었다. 건물에너지 측면에서 PCM은 여름철 냉방부하는 감소하고 겨울철 난방부하는 증가하여 총에너지에서는 아주 미세하게 증가하는 모습을 보이지만 PV의 발전효율 개선을 통해 이는 충분히 상쇄될 수 있는 것으로 평가하였다.
철도차량 패널의 치수최적설계 및 리브 배치를 위한 위상최적설계
신대환(Dae-Hwan Shin),이현아(Hyun-Ah Lee),김광우(Kwang-Woo Kim),이장욱(Jahng-Wook Kim),박경진(Gyung-Jin Park) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.10
The railway-car body consists of sandwich panels, and a sandwich panel is constructed with panels and ribs. The mass of the body can be reduced by changing the thicknesses of the panels and ribs. The thicknesses of the panels and the ribs are defined as the design variables. Size optimization is performed to reduce the mass of the railway-car body. Constraints are defined as that the maximum stress of the entire structure and the maximum displacement of the side sill should be less than the allowable stress and displacement. Topology optimization is performed to maximize the stiffness of the structure with specific mass constraints. The railway-car body is divided into six parts. Each part is defined as the design domain and topology optimization is carried out individually. The same loading and boundary conditions are utilized for size and topology optimizations.
폭발하중을 받는 철근콘크리트 기둥의 잔류 강도 추정식에 관한 연구
최호순,신대환,김민숙,김대진,김희철,이영학,Choi. Hosoon,Shin. Dae Hwan,Kim. Min-Sook,Kim. Dae Jin,Kim. Heecheul,Lee. Young Hak 한국방재학회 2013 한국방재학회논문집 Vol.13 No.1
폭발하중에 의한 구조물의 피해는 일차적 피해(국부적인 손상)와 이차적 피해(연쇄붕괴)로 분류할 수 있다. 본 연구의 목적은 폭발하중에 의해 손상된 철근콘크리트 부재의 잔류 저항성능을 정량적으로 예측 및 평가 가능한 추정식을 제안하고자 한다. 본 연구에서는 단면비, 전단경간비, 축하중비를 변수로 하여 비선형 동적해석이 가능한 프로그램인 AUTODYN을 이용하여 해석한 후 해석결과를 토대로 회귀분석을 수행하여 폭발하중을 받는 철근콘크리트 기둥의 잔류 저항성능을 평가하는 추정식을 제안하였다. 각 변수를 독립변수로 회귀분석을 수행 한 결과 축하중비가 결정계수 0.911로 가장 높은 상관성을 보였으며, 변수들을 조합하여 다중 회귀분석을 수행한 결과 세 가지 변수를 모두 적용하여 분석한 추정식이 결정계수 0.774로 가장 타당한 유효성을 보였다. Damage of structures under blast loading can be classified into local damage and building collapse. The purpose of this study is to propose an residual strength equation being able to predict residual strength of damaged columns. In this study it was carried out 3 different variables, which is aspect ratio, shear span-to-depth ratio and axial force ratio. The equation was proposed by regression analysis based on the analysis results using AUTODYN. The Results indicated the R-square of axial force ratio was the highest value; 0.99. And the presumption equation with all variables has higher accuracy and its R-square was 0.77.