http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
원통형조사창에서의 절리선 길이분포를 이용한 암반 내 절리직경분포 추정에 관한 연구
전기환(Kihwan Jeon),송재준(Jae-Joon Song),조영도(Young-Do Jo) 한국암반공학회 2011 터널과지하공간 Vol.21 No.5
본 연구에서는 암반 내 원통형 공동면에 나타나는 절리선 길이분포를 이용하여 암반 내에 존재하는 절리의 직경분포를 추정하기 위한 알고리듬을 제안하였다. 암반 내 절리의 직경분포를 추정하기 위해서 송재준(2005)에 의해 제시된 Joint Center Volume(JCV)의 개념이 적용되었다. 평면 조사창에 나타나는 절리선에 대한 JCV 값을 산정하는 송재준(2005)의 알고리듬을 확장하여 원통형 공동면을 조사창으로 하는 경우의 암반 내절리 직경분포 추정을 위해 전수조사 기법을 적용한 JCV 계산 알고리듬을 개발하였다. 추정된 절리 직경분포는 Monte-Carlo 시뮬레이션 기법을 이용하여 절리직경 모분포와 비교 검증하였으며 추정된 절리 직경분포가 모분포와 20% 내외의 오차 범위에서 수렴하는 것을 확인하였다. This study suggests an algorithm for estimating joint diameter distribution in rock mass from the joint trace length distribution around a circular tunnel. For estimating the joint diameter distribution the concept of Joint Center Volume (JCV) suggested by Song. (2005) was applied and the calculation method of JCV for the cylindrical window survey was developed by using the complete survey method. The estimated joint diameter distribution was verified against the original joint diameter distribution by Monte-Carlo simulation. It was observed that the estimated joint diameter distribution was converged to the original joint diameter distribution with less than 20% of error.
최소자승법을 이용한 원판형 절리의 직경분포와 체적빈도 추정에 관한 연구
송재준(Jae-Joon Song) 한국암반공학회 2005 터널과지하공간 Vol.15 No.2
이 연구에서는 최소자승법을 이용하여 절리의 직경분포를 추정하는 방법을 개발하였다. 이전에 Song and Lee가 제안한 방법에서는 현장에서 조사한 양끝내포선(contained trace)분포로부터 무한 조사창에서 정의되는 절리선(joint trace) 길이 분포를 먼저 구하고 이 후에 직경분포를 구하게 된다 그러나 새로 제안한 방법을 사용하면 중간 추정과정없이 현장에서 얻은 양끝내포선 분포로부터 바로 절리의 직경분포를 구할 수 있다 이전의 방법과 비교할 때 새로 제안된 방법은 표본의 크기가 작을 때 조금 더 높은 추정정밀도를 보이며, 직경분포를 추정하는 과정에서 절리의 기하학적 파라미터의 하나인 체적빈도(volumetric frequency)도 제공한다. 새로운 추정법의 검증을 위해 Monte Carlo 시뮬레이션을 적용하였다. An estimation technique of the joint diameter distribution using the least square method is suggested. When utilizing the technique by Song and Lee, the diameter distribution would be obtained only from the trace length distribution defined in an infinite window after the trace length distribution is estimated from the contained trace length distribution. With the new technique, however, the diameter distribution can be directly obtained from the sample histogram of the contained trace lengths. Compared with the previous technique, it shows a more accurate result for small sizes of joint samples and provides the joint geometry parameter of volumetric frequency. Verification of this new technique was completed by using Monte Carlo simulations.
Alum과 Chitosan을 이용한 도축장 폐수 슬러지의 비료화 가능성 연구
송재준 ( Song Jee-june ),홍순강 ( Hong Soon-gang ),이영호 ( Lee Young-ho ) 한국환경기술학회 2000 한국환경기술학회지 Vol.1 No.2
유기성 슬러지의 자원화를 위해서는 유기성 폐수의 처리과정에서 주입되는 alum과 polymer같은 무기성 약품의 양을 감소시켜야 한다. 이들 무기계 응집제가 첨가된 슬러지는 슬러지의 이용성에 문제가 있는 것으로 알려져 있다. 본 연구에서는 도축장 폐수의 슬러지 대한 재이용 가능성을 평가하기 위하여 응집제를 사용하여 슬러지를 만들어 실험하였다. 무기계 응집제인 alum과 무해한 것으로 알려진 유기계 응집제인 chitosan을 이용하여 슬러지를 만들었다. 만들어진 슬러지를 가지고 7개 중금속(Zn, Cu, Cr, Cd, As, Hg, Pb)에 대하여 용출실험을 수행하였다. 실험결과 chitosan을 이용하여 응집한 슬러지가 alum으로 응집한 슬러지보다 중금속을 덜 함유한다는 것을 알 수 있었다. For the sake of reusing the organic sludge into resources, we should decrease the amount of inorganic chemicals such as alum and polymer, added in the process of treating the organic wastewater. The sludge added with those inorganic coagulants has been a problem in the utilization of sludge. In this research, We performed experiment using sludge prepared with coagulants in Order to assess the possibility of reutilization of slaughterhouse wastewater. We prepared sludge by using alum, an inorganic coagulant, and chitosan, known as a harmless organic coagulant, Then, we carried out a gushing-out test on seven heavy metals (Zn, Cu, Cr, Cd, As, Hg, Pb) with the sludge we prepared. The result showed that the sludge coagulated by alum contained less heavy metals than the sludge coagulated by chitosan.
송재준 ( Jee-june Song ),홍순강 ( Sun-gang Hong ),이지은 ( Ji-eun Lee ),김지용 ( Ji-yong Kim ) 한국환경기술학회 2010 한국환경기술학회지 Vol.11 No.3
사전환경성 검토의 실효성을 높이기 위해서는 사전환경성 검토에서 예측된 내용이 각종 사업의 공사중 또는 이용시 실제 현황과 일치하는지 검토하고, 개선해야 될 대상과 원인을 도출하는 것이 매우 중요하다. 본 연구에서는 수질환경영향평가 협의내용의 이행정도와 예측방법에 대한 타당성 여부, 협의내용적용가능성 여부 등을 파악하기 위하여 폐기물 보관 부지 확장에 대한 공사 예정중인 대전에 위치한 아스콘 공장을 대상으로 사전환경성 검토 협의내용과 현지조사결과를 비교·분석하였다. 대상사업별 수질분야 중점항목으로 공사 시 우수유출량, 토사유출량, 공사장 오수발생량 등을 예측하였다. 수질현황을 조사하기 위하여 인구지역 내 인근 하천 현황 수질조사를 위해 3개의 지점을 조사한 결과, 하천수질 등급기준으로 약간 좋음을 나타내는 Ⅱ등급을 나타내었다. 공장설립으로 인한 영향예측 결과 공사 시 강우로 인한 토사유출량은 47.61ton/day이고 유출토사 가중농도는 648.29mg/L로 나타났다. 저감방안으로 공사 시 가배수로와 물막이공을 설치하여 절·성토에 의한 토사유출을 방지하고 침사지를 설치하여 토사입경이 0.1mm 이상인 토사는 완전 제거될 수 있도록 시행할 계획이다. 현장작업 인력에 의한 오수 및 분뇨 처리방안으로 기 설치된 오수정화시설을 사용할 계획이며 운영시 초기우수 처리는 오수정화시설에서 처리 후 방류할 계획으로 본 연구 지역의 수질 환경 영향평가 결과 환경 기준치에 적합한 것으로 나타났다. One of the important processes in environmental effects assement is to check how the result of environmental effects assement would adequately be fulfilled throughout the whole stages of a project from construction to utilization. Monitoring process plays a crucial role in environmental effects assement because it detects any significant environmental changes due to development activities while verifying how well the project is being performed based on the result of environmental effects assement. This study was investigated total water pollution load management during operation stage, generated sewage by workers and effects of sediment run off near surrounding are reviewed. According to predicted results to a factory construction, sand run off which causes by rainfall during construction is 47.61ton/day, sand run off is 648.29mg/L and the predicted result of generated sewage by workers is BOD 0.04kg/day. By result of computation for reduction of effluent load in land, final effluent load is increased by 0.935kg/day. The solution for reduction is to install diversion channel and coffering to prevent sand run off. Also it is planning to install a grit chamber for removing some sand which size is less than 0.1mm. Also it is planned to use a sewage disposal facility which was constructed for treatment human waste, and initial treatment for rainfall is planned to discharge after the treatment in sewage disposal facility. The results of EEA in the research area is suitable for environmental standards.