http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Design and Efficiency Analysis 48V-12V Converter using Gate Driver Integrated GaN Module
김종완,최중묵,유세프알라브,제이슨라이,Kim, Jongwan,Choe, Jung-Muk,Alabdrabalnabi, Yousef,Lai, Jih-Sheng Jason The Korean Institute of Power Electronics 2019 전력전자학회 논문지 Vol.24 No.3
This study presents the design and experimental result of a GaN-based DC-DC converter with an integrated gate driver. The GaN device is attractive to power electronic applications due to its superior device performance. However, the switching loss of a GaN-based power converter is susceptible to the common source inductance, and converter efficiency is severely degraded with a large loop inductance. The objective of this study is to achieve high-efficiency power conversion and the highest power density using a multiphase integrated half-bridge GaN solution with minimized loop inductance. Before designing the converter, several GaN and Si devices were compared and loss analysis was conducted. Moreover, the impact of common source inductance from layout parasitic inductance was carefully investigated. Experimental test was conducted in buck mode operation at 48 -12 V, and results showed a peak efficiency of 97.8%.
김종완,조양현,Kim, Jongwan,Cho, Yang-Hyun 한국정보통신학회 2014 한국정보통신학회논문지 Vol.18 No.7
본 논문은 주변탐색(Surrounder Search: SuSe)이라는 새로운 공간질의 방법을 제안한다. 이 기법은 현재 사용자의 위치를 중심으로 주변에서 가까운 관심영역의 공간객체를 탐색하는 것이다. 사용자 중심의 주변탐색은 증강현실과 같이 사용자가 관심 있어 하는 공간객체 중 가까운 것을 찾기 때문에 기존의 공간질의와 구별된다. 기존 기법은 질의점과 객체 사이의 최단거리(MINDIST)를 기준으로 주변을 탐색하지만 제안 기법에서는 객체들 사이에 숨어있지만 관심의 대상인 숨은 객체를 식별하기 위해서 각도(Angle)를 함께 고려하여 탐색한다. 제안 기법의 특징은 기존기법이 거리만을 사용하여 가까운 객체를 탐색한 것과 달리 거리는 멀지만 숨은 객체까지도 찾아냄으로써 사용자의 선호도를 더 세밀하게 반영한다. 실험결과에서 제안기법인 SuSe는 최근접 이웃 탐색기법인 NN(Nearest Neighbor)과 비교하여 보다 정밀한 공간객체 탐색이 가능하며 향상된 탐색성능을 타나낸다. In this paper, a new method of spatial query, which is called Surround Search (SuSe) is suggested. This method makes it possible to search for the closest spatial object of interest to the user from a query point. SuSe is differentiated from the existing spatial object query schemes, because it locates the closest spatial object of interest around the query point. While SuSe searches the surroundings, the spatial object is saved on an R-tree, and MINDIST, the distance between the query location and objects, is measured by considering an angle that the existing spatial object query methods have not previously considered. The angle between targeted-search objects is found from a query point that is hidden behind another object in order to distinguish hidden objects from them. The distinct feature of this proposed scheme is that it can search the faraway or hidden objects, in contrast to the existing method. SuSe is able to search for spatial objects more precisely, and users can be confident that this scheme will have superior performance to its predecessor.
Shortest Path Search Scheme with a Graph of Multiple Attributes
Jongwan Kim(김종완),KwangJin Choi(최광진),Dukshin Oh(오덕신) 한국컴퓨터정보학회 2020 韓國컴퓨터情報學會論文誌 Vol.25 No.12
그래프 이론에서 최소비용 경로는 시작 노드와 도착 노드 사이의 최단 경로를 탐색하여 구한다. 최소비용은 두 노드 사이의 거리나 가격의 차이를 1차원 값으로 계산하며 연결된 노드 사이의 최소비용의 합을 구성하는 노드와 간선이 최단 경로다. 그러나 각 노드가 다중속성을 갖는 경우에는 경로에서 나타날 수 있는 비용의 종류 또한 속성의 개수만큼이므로 최단 경로를 판단하기에는 어려움이 있다. 본 논문에서는 사용자의 다양한 요구사항을 만족할 수 있도록 유클리드 거리를 사용하여 다중속성을 반영한 최단 경로 탐색 기법을 제안한다. 실험에서는 1차원 값에 대한 최단 경로와 2차원 속성에 대한 유클리드 거리를 이용한 최단 경로가 다르게 탐색 되었다. 다중속성에서도 단일 속성과 차별화된 사용자의 선호 속성이 반영된 것으로 나타났다. 결과적으로 다중속성이 반영됨으로써 사용자의 다양한 요구사항을 만족시킬 수 있게 되었다. In graph theory, the least-cost path is discovered by searching the shortest path between a start node and destination node. The least cost is calculated as a one-dimensional value that represents the difference in distance or price between two nodes, and the nodes and edges that comprise the lowest sum of costs between the linked nodes is the shortest path. However, it is difficult to determine the shortest path if each node has multiple attributes because the number of cost types that can appear is equal to the number of attributes. In this paper, a shortest path search scheme is proposed that considers multiple attributes using the Euclidean distance to satisfy various user requirements. In simulation, we discovered that the shortest path calculated using one-dimensional values differs from that calculated using the Euclidean distance for two-dimensional attributes. The user’s preferences are reflected in multi attributes and it was different from one-dimensional attribute. Consequently, user requirements could be satisfied simultaneously by considering multiple attributes.
2 - Phase Self - Organizing Neural Network을 사용한 개선된 VQ 설계 방법
김종완(Jongwan Kim),황희융(Heeyeung Hwang) 한국정보과학회 1993 한국정보과학회 학술발표논문집 Vol.20 No.1
본 논문에서는 개선된 벡터 양자화(Vector Quantization) 설계 방법을 제안한다. 기존의 LBG 알고리즘은 분할에 의해 생성된 초기 코드북에 대해 반복된 실험을 통하여 최종의 코드북을 구한다. 그러나 제안한 방법은 입력 화상의 일부를 샘플링 한 후 이를 2-Phase Self-Organizing Neural Network으로 학습시켜서 코드북의 크기를 미리 결정한다. 결정된 초기 코드북을 LBG알고리즘으로 훈련시키므로서 효율적인 코드북을 설계한다. 제안한 방법을 Linde등이 제안한 반복분할법과 임의의 코드워드 사용법, 그리고 Kohonen의 SOFM 알고리즘과 비교하였다. 실험 결과 제안한 방법은 최적으로 알려진 반복분할법과 비슷한 성능을 보이면서 미리 코드북의 크기를 결정하므로 반복된 실험을 피할 수 있어서 실시간 응용이 가능하다.
김종완(Jongwan Kim) 한국정보과학회 1996 한국정보과학회 학술발표논문집 Vol.23 No.2A
기존의 교차로 신호 제어방법들로는 고정식 방법과 퍼지제어 방식이 있다. 고정식이란 미리 정해진 신호계획에 따라 신호등의 주기를 조절하는 방식이다. 퍼지제어 방식은 녹색신호에 교차로로 진입하는 차량수와 적색신호동안 대기하는 차량수를 퍼지제어의 입력변수로 사용하여 확장시간을 조정하는 것이다. 그러나 이들 방법은 교차로에 진입하는 차량들의 분포가 다양하게 변하면 성능향상에 한계가 있었다. 본 논문에서는 교차로에 진입하는 교통량이 변하더라도 적절하게 신호동의 주기를 제어할 목적으로 교통량을 제어규칙에 추가한 새로운 퍼지논리제어기를 제안한다. 제안된 방법은 개발한 시뮬레이터로 실험한 결과 우수한 성능을 보여주었다.
EMS/SCADA의 DNP3 연계구간 보안성 평가·인증 기술 연구
김종완(Jongwan Kim),손태식(Taeshik Shon) 한국정보보호학회 2015 정보보호학회논문지 Vol.25 No.3
기존의 EMS/SCADA에서 제어시스템과 필드디바이스 간의 연계시스템은 데이터의 신뢰성을 높이기 위해서 외부 네트워크와의 망 분리를 통한 접근 통제를 하였지만 현재는 운영의 효율성 증대와 체계적 관리, 경제적 측면을 고려한 외부 망과의 연결 필요성이 증가하고 있는 추세이다. 이런 발전한 연계구간은 과거에 비해 더 많은 보안 취약점을 갖게 되었으며, EMS/SCADA 연계구간에서의 통신은 특별한 관리 방법이 필요하다. 본 논문에서는 국내 환경을 고려하여 EMS/SCADA 연계구간에서 주로 사용되는 시리얼 DNP3와 TCP/IP기반 DNP3를 적용한 보안성 평가·인증기술을 제시하였다. 제시하는 보안성 평가?인증기술은 자원 안전성 테스트와 악성 패킷 테스트 2가지 세부 평가로 나누어 안전성을 평가하며 각각의 보안 요구사항 및 평가방법을 도출하여 기존의 평가?인증 기술들과의 차별성을 제시하고자 하였다. The linking system between the control system and the field devices in the existing EMS/SCADA, in order to increase the reliability of the data, and access control through the separation of external network. Currently, There is a tendency that the need for connection to an external network that takes into account the economic aspect, systematic management and efficiency of operations is increasing. Such is evolved linkage section, is to have more security vulnerabilities than in the past, Eventually communication EMS/SCADA linkage section requires special management method. In this paper, taking into account the domestic environment, were presented the security Certification and Accreditation technology that was applied to serial DNP3 and TCP/IP based DNP3 that are mainly used in EMS/SCADA linkage section. Presented to security of Certification and Accreditation technology, divided into Resource Robustness Test and Malicious Packet Test for evaluate the safety. Each of the security requirements and evaluation method in proposed technology, is an attempt to present the differentiation of the existing Certification and Accreditation technology.