http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김범수,정해도,배원병,Kim, Beom-Su,Jeong, Hae-Do,Bae, Won-Byeong 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.1
As dies and molds have become more and more complicated in the recent years, the demand for lower cost and shorter production time is also growing stronger. Rapid prototyping and Tooling technologies are expected to be used for more rapid and lower cost tool fabrication. However the rapid tooling methods have not yet reached the level of application to the manufacturing of metallic dies and molds which require high dimensional accuracy. As the rapid tooling technology, there are the slurry casting, the powder casting, the direct laser sintering, and so on. Generally, in the slurry casting, the alumina powder and the water soluble phenol were mainly used. However, the mechanical properties of the phenol were not good enough to apply to molds directly. In this study, pure epoxy and two types of aluminium powder reinforced resin are applied to the slurry casting. The mechanical and thermal properties are better than phenol because the epoxy is the thermosetting resin. And mechanical characteristics such as shrinkage rate, hardness, surface roughness are measured for the sake of comparison. Metal powder reinforced resin molds are better than the resin tool form the viewpoint of shrinkage rate and hardness. Finally, it has been shown that the application possibility of this process is high, because the manufacturing time and cost savings are significant.
링크 유효시간에 따른 OLSR 토폴로지 그래프 생성 방법
김범수,노봉수,김기일,Kim, Beom-Su,Roh, BongSoo,Kim, Ki-Il 대한임베디드공학회 2019 대한임베디드공학회논문지 Vol.14 No.4
One of the most widely studied protocols for tactical ad-hoc networks is Optimized Link State Routing Protocol (OLSR). As for OLSR research, most research work focus on reducing control traffic overhead and choosing relay point. In addition, because OLSR is mostly dependent on link detection and propagation, dynamic Hello timer become research challenges. However, different timer interval causes imbalance of link validity time by affecting link lifetime. To solve this problem, we propose a weighted topology graph model for constructing a robust network topology based on the link validity time. In order to calculate the link validity time, we use control message timer, which is set for each node. The simulation results show that the proposed mechanism is able to achieve high end-to-end reliability and low end-to-end delay in small networks.
김범수,Kim, Beom-Su 한국CRM학회 2006 CRM연구 Vol.1 No.1
인터넷 웹사이트를 통한 개인정보의 대량 유통, 상품배송기관을 통한 개인정보의 유출, 명의도용, 신용정보유출 등의 정보프라이버시 침해의 사례가 많이 발표되면서, 개인정보의 적절한 이용과 정보 프라이버시(Information Privacy)의 보호에 대한 관심이 날로 높아져가고 있다. 이러한 사회 현상과 시민의 관심을 반영하여 개인정보 보호를 위한 다양한 법률과 제도가 최근에 검토되고 있다. 이 연구에서는 이름, 전화번호, 주소, 전자우편주소 등 비교적 민감하지 않은 개인정보를 기업의 마케팅이나 홍보에 이용하는 경우의 좁은 의미에서의 개인정보 보호에 초점을 맞추었다. 이러한 개인정보 및 개인정보서비스 와 관련된 법률, 정책 및 제도를 정보의 생성과 이용의 흐름 및 경제주체를 중심으로 적절한 정보의 이용이 보장 되면서 개인의 정보프라이버시가 보호될 수 있는 방안을 마련하는 방법을 체계적으로 검토하였다. 해외의 개인정보서비스 산업의 사례 조사를 통하여 향후 우리나라에서 개인정보서비스산업이 활성화되었을 때 개인의 만족증대, 실질적인 정보보호 수준의 향상, 고용창출, 기업활동의 효율화, 관련기업의 국제경쟁력 고양 등의 기대효과가 있음을 보였다. 또한, 개인정보의 적절한 이용과 보호, 그리고 정보서비스산업의 활성화를 위하여 관련 법률의 제정 및 개정, 정보보호 제도의 개발 및 효과적 운영, 장기적 정보서비스 산업 활성화 정책 수립과 단계적 추진, 활성화를 위한 정부 및 민간 재원 확보, 사회적 공감대 형성, 지속적인 연구 등을 제안한다.