대한국제법학회의 독도학술연구조사에 의한 한국의 독도에 대한 실효적 지배

김명기(Myung-Ki Kim) 대한국제법학회 2018 國際法學會論叢 Vol.63 No.1

1979년 대한국제법학회는 “독도학술연구조사단”을 구성하여 한국해양대학의 “한바다호”편으로 독도에 상륙하여 독도학술연구조사활동을 실행한바 있다. 대한국제법학회는 대한민국의 국가기관이 아니고, 민법상 사단법인에 불과하다. 따라서, 대한국제법학회가 독도에 상륙하여 행한 학술연구조사활동은 대한민국의 독도에 대한 실효적 지배의 효력이 인정되지 아니한다고 보기 쉽다. 그러나, 사적인 개인이나 단체의 행위가 국가기관의 사전적인 허가 혹은 협조로 행하여 진 경우는 그 사적 단체의 행위는 국가기관의 행위로 인정되어 위 독도학술연구조사 활동은 당시 치안본부의 사전허가와 한국해양대학의 사전협조로 독도에 상륙하여 학문적 연구와 조사활동을 실행한 것은 대한민국의 독도에 대한 실효적 지배로 인정된다. 그리고, 김대령의 행위도 대한민국의 국가기관의 행위로 인정된다. 대한국제법학회와김대령의 독도에서의 학문적인 조사와 연구활동이 있었다는 사실을 입증하기 위한 증거를 보관해야 할 것이 오늘의 과제이다. On March 26, 1979 the Korean Society of International law organized a Group of the Academic Study and Research over Dokdo constituted 28 persons and the society landed on Dokdo studied and researched over Dokdo, However the society was not a organ of the ROK as a state but a private person. Therefore the study activities of the Society did not constitute the effective control over Dokdo by the ROK. However the Society attained the authorized Permission landing on Dokdo by the headquarters of National Policy one of the organ of the ROK as a state in advance. And attained the cooperation of the National Maritime Academy to use the training ship named “Hanbadaho”. The Permission and the cooperation of national organ of the ROK in advance the studies and researches of the Society on the Dokdo were recognizes the effective control over Dokdo by the ROK. For the purpose of maintenance of Korean territorial title of Dokdo, It is necessary for the Government and the Society to preserve the evidences that the society and colonel Kim’s academic activities to study and research on Dokdo were constitutes the effective control over Dokdo. it’s obvious fact that Korean territorial severity over Dokdo under control of Korean government the fact was confirmed by the colonel Kim’s landing on Dokdo for academic study and researches over Dokdo.

종합적 질 관리 (TQM)를 위한 프로세스 분석 방법 -의약품 실체를 중심으로-

김명기,Kim, Myeng-Ki 한국의료질향상학회 1994 한국의료질향상학회지 Vol.1 No.1

Total quality management has been a focus of concern in recent years since some dissatisfaction with the results from implementation of quality assurance programs in the U.S. Many managerial methodologies and innovation guidelines from academic disciplines have been applied to promote TQM programs in the health field. This paper consists of two folds of aspects: firstly to examine TQM's managerial philosophy by comparing with the newly introduced managerial concepts in Business Reengineering; and then to introduce a method for an integrative way of process analysis, Entity Life-Cycle Diagram (ELCD) modeling. The analysis method was compared with Process Map, which is a well-known method for BR applications. To show effectiveness of ELCD modeling, a case of application was introduced using 'drug' as a target entity. With having TQM issues in mind, the result was reflected in designing Entity Relation Diagrams. The results of ELCD modeling turn out to be helpful in designing database related to quality monitoring, in that many monitoring check points can be identified in a systematic way and that queries cross-sectional over organizational boundaries can be generated with a consistent view focusing on the drug use as a single process. Full evaluation of the analysis method remains to be studied until the completion of the information system under construction. But as long as TQM is based on a process-oriented view and needs supports from information system, ELCD can be one of the appropriate choice as a tool for the process analysis.

노즐 인쇄기법을 이용한 유기 잉크 용액 공정 연구

김명기,이정민,성덕형,김주태,강경태,Kim, Myong-Ki,Lee, Jungmin,Sung, Dug-Hyung,Kim, Ju-Tae,Kang, Kyungtae 대한기계학회 2013 대한기계학회 논문집. Transactions of the KSME. C, 산업기술과 혁신 Vol.1 No.2

노즐을 이용한 인쇄 기법은 주로 전자 소자의 봉지를 위한 접착제의 인쇄분야에 적용되어 왔다. 노즐 인쇄를 통한 기능성 물질의 필름 형성은 커다란 도전이 될 수 있다. 본 논문에서는 노즐을 이용한 유기 잉크의 인쇄 특성을 실험을 통하여 알아보았다. 본 연구의 노즐 인쇄 실험에서 패턴을 형성하기 위한 잉크는 유기 발광 물질인 TAPC를 사용하였다. 인쇄된 패턴 폭은 잉크 공급 유량의 증가와 기판의 온도의 상승에 따라 증가하였다. 또한 인쇄된 패턴은 건조 후 커피링 형상을 나타내었다. Nozzle printing technology has been usually used for adhesive patterning to encapsulate electronic devices. Film formation of functional materials by nozzle printing is a great challenge. The characteristics of nozzle printing of organic ink were investigated systematically in this paper. TAPC as an organic emitting material was used as an ink for nozzle printing experiment to form the patterns in this study. Printed pattern width was increased as the ink flow rate and the printed substrate temperature were increased. The patterns showed a coffee-ring shape.

일별 병상가동수에 대한 시계열분석

김명기,Kim, Myeong-Gi 대한병원협회 1991 대한병원협회지 Vol.20 No.11

위험성평가사례 - 목재가구 생산 공정

김명기,Kim, Myeong-Gi 대한산업안전협회 2010 안전기술 Vol.146 No.-

DQSM 알고리즘을 이용한 FIR 디지털 필터의 구성

김명기,임영도 동아대학교 공과대학 부설 한국자원개발연구소 1986 硏究報告 Vol.10 No.1

A method on the hardware implementation of the Finite Impulse Response (FIR) digital filter using Digital Quarter Square Multiphcation (DQSM) algorithm is proposed. ROM requirement can be reduced by using the double precision algorithm and the absolute value circuit, and also execution speed can be improved by reducing logic level steps of absolute value circuit. The frequency response of FIR digital filter implemented by the above method is quite agreeable with the frequency response simulated by Remez exchange algorithm. If coefficients should be stored in the RAM instead of the ROM, this method is especially useful in the case of FIR digital filter with time varying coefficients.

병원정보화와 의료의 질

김명기,Kim, Myeong-Gi 한국의료질향상학회 1997 한국의료질향상학회지 Vol.4 No.1

스파이럴 라인을 이용한 마이크로스크립 원형 슬롯 안테나

김명기,박익모,Kim, Myoung-Ki,Park, Ik-Mo 대한전자공학회 2001 電子工學會論文誌-TC (Telecommunications) Vol.38 No.5

본 논문에서는 스파이럴 형태의 급전선을 갖는 마이크로스트립 원형 슬롯 안테나를 제안하였다. 이 구조는 편심 스파이럴 안테나를 평면적으로 구현한 것으로서, 주빔이 안테나 평면에 수직한 방향을 향하지 않고 기울어져 있으며 주빔의 방향으로 원형 편파를 갖는다. 또한 주빔의 방향이 주파수 변화에 따라서 ${\theta }$ 와 ${\phi }$ 방향으로 일정하게 변하므로 동작 대역 내에서 주빔의 방향을 예측할 수 있다는 장점이 있다. EM 시뮬레이션을 통하여 설계변수에 따른 안테나의 특성변화를 고찰하였으며 최적의 설계방법을 제시하였다. 최적화 된 구조는 1 octave 이상의 주파수 대역에서 주빔 방향으로 3 dB이하의 축비를 가진다. A novel microstrip circular slot antenna fed by a spiral line is presented in this paper. This antenna is a planar equivalent structure of an eccentric spiral antenna generates a circularly-polarized wave. We have investigated the input impedance and radiation characteristics of this antenna by using an EM (electromagnetic) simulator, and obtained a design method [or optimum structure. The main characteristic of the antenna is that the main beam direction is off-normal to the antenna plane and moves linearly into ${\theta }$ and ${\phi }$ direction as the frequency increases. This feature allows one to predict the main beam direction easily for a given operating frequency. This antenna has axial ratio lower than 3 dB in the direction of main beam over one octave bandwidth.

CdS 태양전지의 제작과 그 특성에 관하여

김명기,홍창희,최부귀,Kim, Myeong-Gi,Hong, Chang-Hui,Choe, Bu-Gwi 대한전자공학회 1978 전자공학회지 Vol.15 No.3

Cu2-xS-CdS PN 접합 태양전류의 효률 향상을 위하여 직렬저항을 감소시키는 방법을 고려하였다. Cu2-xS의 박막을 만들 때 도전율이 제일 큰 것은 기판온도 250℃에서 얻어졌다. CdS 박막도 기판의 온도가 250℃ 이상 300℃ 정도이고 증발원의 온도가 800∼850℃ 정도에서 만든 것이 도전율이 제일 컸으며 광도전특성도 좋다는 것을 확인하였다. 따라서 기판온도를 250℃로 하고 증발원 온도를 800∼850℃정도에서 증착된 박막형 CdS 태양전지를 만들었고 효율을 측정하였더니 6% 정도였다. In order to improve the efficiency of Cu2-xS-CdS PN junction type solar cell, a method of reducing the series resiatance is considered. In the fabrication of the thin film of Cu2-xS, what has the largest value of conductivity is fabricated at 250 $^{\circ}C$. The thin film of CdS which has beer fabricated at the temperature 250-30$0^{\circ}C$ of the substrate and 800-85$0^{\circ}C$ of evaporating material has the largest value of conductivity and also fairly good photoelectric characteristics. Therefore, the evaporated thin aim type CdS solar cell has been fabricated at the temperature 25$0^{\circ}C$ of the substrate and 800-85$0^{\circ}C$ of the evaporating material, and its efficiency is measured to he 6%.

탄력저항운동과 운동치료가 고관절 전치환 수술 환자의 하지근력 및 통증에 미치는 영향

김명기(Myung Ki Kim),김신(Shin Kim),김성수(Seong Su Kim) 한국사회체육학회 2007 한국사회체육학회지 Vol.0 No.31

The purpose of this study was to investigate the effects of elastic resistance exercise program combine with standard exercise protocol for patients who undergone total hip arthroplasty(THA). Sixteen subjects with a mean age of 67.4 years(SD=2.9) who had total hip arthroplasty(THA) on acute phase recovery were randomly assigned to one of two exercise groups. The control groups(n=8) received standard exercise protocol(Basic Isometric and active ROM exercise), while the experimental groups(n=8) received elastic resistance exercise program combine with standard exercise protocol. Assessment of muscles strength, weight bearing ratio and pain scales were performed before, after the 4-weeks exercise intervention. The results of this study were summarized as follow: 1. After Test, Elastic resistance exercise program combine with standard exercise protocol there was significant difference to increase Dorsiflexors, Knee Extensors, Knee Flexors, Hip Extensors, Hip Flexors, Hip Abductors(p<0.001). 2. After Test, Elastic resistance exercise program combine with standard exercise protocol there was significant difference to increase Weight bearing ratio and Pain scales(p<0.001). This study shows that can be improved muscle strength, weight bearing ratio, pain scales after elastic resistance exercise program combine with standard exercise protocol. Therefore, it is recommended that elastic resistance exercise program combine with standard exercise protocol be applied in patients who are acute stage Following total hip arthroplasty(THA).