간호중재분류체계(NIC)를 이용한 중환자실 간호중재 분석

권경남,장희정,황운순,김은주,이미경 영남이공대학 산업기술연구소 2000 産業技術硏究 Vol.12 No.-

The purpose of this research was to identify nursing interventions performed by the ICU nurses from 2 university hospital in Taegu. For this research, I used the Nursing Intervention questionnaire developed by the Iowa Intervention Project and translated by korean specialists and professor concerned to the same field. In order to obtain the data, a special group of professor, head nurse, charge nurse, researcher was instituted. The special group work validataed 205 nursing interventions with agreement of more than 50% becuse the NIC(433 nursing intervention) survey process was too time-consuming and not appropriate for all labels. The data were collected from June 1 to 30, 1999 and analysed with SAS program. The obtained results are as follows; (1) 94 interventions were performed at least daily. (2) The most frequently used nursing interventions were Parenteral Medication Administration, Aspiration Precautions, Pressure Ulcer Prevents, Positioning, Airway Management, Cough Enhancement in rank. In conclusion, this research using NIC has helped to figure out the component to the ICU care in korea. The use of this results will contribute to enhance quality assessment and improve standard of ICU nursing.

기종성 방광염 1예

마성권,나명윤,박종욱,고정희,염충호,김수완,김남호,최기철 全南大醫大 2001 전남의대학술지 Vol.37 No.2

Ba-Ferrite를 이용한 자기 연마재 개발

김희남,송승기,정윤중,윤여권,김희원,조상원,심재환 한국안전학회 2003 한국안전학회지 Vol.18 No.2

The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the transportation of the pure gas in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper we deals with the development of the magnetic abrasive with the use of Ba-Ferrite. In this development, abrasive grain WA has been made by using the resin bond fabricated at low temperature. And magnetic abrasive powder was fabricated from the Ba-Ferrite which was crushed into 200 mesh. The XRD analysis result shows that only WA abrasive and Ba-Ferrite crystal peaks were detected, explaining that resin bond was not any more to contribute chemical reaction. From SEM analysis, we found that WA abrasive and Ba-Ferrite were strongly bonding with each other.

Cuponal Busbar에 관한 연구

김희남,윤여권 명지대학교 대학원 1997 대학원논문집 Vol.1 No.-

This syudy is concerned with an analysis on the composite rod extrusion with soft core through conical dies by upper bound theorem. Composite billets of Cu alloy with pure Al core are extruded experimentally at 500℃ temperature. The analytical results are compared with the experimental datas and the following conclusions can be drawn. The extrusion pressure increase with reduction of area. Tensile stress around the central axis caused by the velocity difference of plastic flow between inner and outer part of specimen may lead to density decreasing.

Sludge를 이용한 자기 연마재 개발

김희남,윤여권,김상백,최희성,안효종 한국안전학회 2004 한국안전학회지 Vol.19 No.2

The magnetic polishing is the usefiil method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper deals with development of the magnetic abrasive using sludge. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the sludge which were crused into 200 mesh and average diameter 01.2mm ball type. The XRD analysis result show that only WA and GC abrasive and sludge crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it is found that WA and GC abrasive and sludge were strong bonding with each other by bond.

DC방전에 대한 전류 및 전압 조건에서 1차원 전산모사

김희정,김형용,권득철,윤남식 충북대학교 컴퓨터정보통신 연구소 2006 컴퓨터정보통신연구 Vol.14 No.1

여러 그룹들의 연구 결과로서 DC 방전 전산모사를 위한 여러 가지 수치해석적 방법들이 보고되어 왔다. 대부분의 방법들은 전극에 전압을 경계 조건으로 가정하고 전류를 구하는 방법인데, 때로는 전류값을 조건으로 주고 전극의 전압이 결정되는 방법이 필요한 경우도 있다. 본 연구에서는 전류값이 조건으로 주어진 경우에 전극의 전압이 결정되는 방법을 적용했으며, 1차원 전산모사를 통해 두 가지 방법에 의한 결과를 비교하였다. Various numerical simulation algorithms for simulating DC discharge were reported from many research groups. Most of reported methods uses terminal electrode voltage as a boundary condition to obtain current density. However, in some case, we need to obtain terminal voltage from boundary condition of current. In this paper, the method which obtain voltage under current condition is applied, and we compared the results of two methods through one-dimensional simulations.

체외형 자동 제세동기(AED)와 심전도계(ECG)를 위한 통신 프로토콜의 설계 및 사용자 인터페이스 구현

김남훈,권희중,권호열,나학록 江原大學校 産業技術硏究所 2004 産業技術硏究 Vol.24 No.A

In this paper, we studied Automated External Defibrillator and Electro- Cardiogram System. Proposed System, CU-EX1, is a PC-based AED/ECG system that manages the data acquired by Paramedic CU-ER1. The system controls the transfer of data from the Paramedic CU-ER1 and the storage of the data in a local host computer. Patient data could be entered as soon as the rescue data is stored in a local computer. The system also displays the data on a local computer and facilitates review of rescue events.

강황과 울금 항염중 효과 연구

김영훈, 배덕성, 김정화, 윤현정, 남인영, 김민선, 신희찬, 차현정, 황방연, 이재권 충북대학교 교육개발연구소 2011 한국교육논총 Vol.32 No.3

-본문참고-

자기연마를 이용한 STS304 파이프 내면의 초정밀 가공

김희남,윤여권,심재환 한국산업안전학회 2002 한국안전학회지 Vol.17 No.3

The magnetic abrasive polishing is the useful method to finish using magnetic power of a magnet. It's not a long time this method was introduced to korea as one of precision finishing techniques. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. The mechanism of this R&D is dealing with the dynamic state of magnet-abrasive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get the best surface roughness at low cost. We need to continue the research on it. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. The average diameters of magnetic abrasive are the particles of 150㎛, 250㎛.

태권도 선수들의 운동 만족이 정신건강 및 생활 만족에 미치는 영향

한권상,손창남,임상호,류경희,장지현,김태우 한국스포츠리서치 2003 한국 스포츠 리서치 Vol.14 No.4

The purpose of this study is to determine how a Taekwondo player's athletic satisfaction affects his/her psychological health and overall personal happiness. A questionnaire survey was carried out on a sample group of 200 students attending colleges located in Seoul and Gyeonggi Province. Then, 23 questionaries deemed not trustworthy were eliminated, leaving 178 questionaries for analysis. The questionnaire, which contained total 128 questions, showed the confidence level falling between .5241 and .8945 (Cronbach's alpha). The study, which relied on frequency analysis, t-test, One-way ANOVA, and Scheffe test, produced the following results. First, athletic satisfaction showed a statistically significant difference (5% range) depending on sex, school year or athletic experience. Second, psychological health resulted in a statistically significant difference (5% range) depending on sex or athletic experience while no difference was noticed regarding school year. Third, happiness in life showed a statistically significant difference (5% range) depending on sex or school year while no difference was noticed with regard to athletic experience.