http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
피치로 코팅된 Nano Silicon Sheets/Graphite 음극복합소재의 전기화학적 특성
이태헌 ( Tae Heon Lee ),이종대 ( Jong Dae Lee ) 한국화학공학회 2021 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.59 No.4
본 연구에서는 피치가 코팅된 실리콘 시트/흑연 음극복합소재의 전기화학적 특성을 조사하였다. NaCl을 주형으로 하여 스토버 법 및 마그네슘 열 환원법을 통해 실리콘 시트를 제조하고, 양친성 물질인 SDBS로 흑연과 결합시켜 실리콘 시트/흑연을 합성하였다. THF를 용매로 석유계 피치가 코팅된 실리콘 시트/흑연 음극복합소재를 제조하였고, 음극복합소재의 물리적 특성은 XRD, SEM, EDS와 TGA를 통해 분석하였다. 전기화학적 특성은 LiPF<sub>6</sub> (EC:DMC:EMC=1:1:1 vol%)의 전해액을 사용해 전지를 제조하여, 충·방전 사이클, 율속, 순환전압전류, 전기화학적 임피던스 테스트를 통해 조사하였다. 실리콘 조성이 증가함에 따라 방전 용량이 증가하였고, 장기 안정성은 감소하는 경향을 보였다. 30 wt% 실리콘 조성을 갖는 실리콘 시트/흑연 복합소재에 피치를 코팅한 음극복합소재는 1228.8 mAh/g의 높은 초기 방전 용량을 보였으며, 50사이클 이후 용량 유지율은 77%로 실리콘 시트/흑연 복합소재에 비해 안정성이 개선됨을 알 수 있었다. In this study, the electrochemical properties of pitch coated silicon sheets/graphite anode materials were investigated. Using NaCl as a template, silicon sheets were prepared through the stӧber method and the magnesiothermic reduction methode. In order to synthesize the anode composite, the silicon sheets and graphite were combined with SDBS. The pitch coated silicon sheets/graphite was synthesized using THF as a solvent for the anode material composite. The physical properties of the prepared anode composites were analysed by XRD, SEM, EDS and TGA. The electrochemical performances of the prepared anode composites were performed by the current charge/discharge, rate performance, cyclic voltammetry and EIS tests in the electrolyte LiPF<sub>6</sub> dissolved solvents (EC:DMC:EMC=1:1:1 vol%). As the silicon composition of silicon sheets/graphite composite material increased, the discharge capacity also increased, but the cycle stability tended to decrease. The anode material of pitch coated silicon sheets/graphite composite (silicon sheets:graphite=3:7 weight ratio) showed the initial discharge capacity of 1228.8 mAh/g and the capacity retention ratio of 77% after 50 cycles. From these results, it was found that the cycle stability of pitch coated silicon sheets/graphite was improved.
Poly(vinyl chloride)가 코팅된 mesocarbon microbeads 음극소재의
이태헌 ( Tae-heon Lee ),조윤지 ( Yoon-ji Jo ),이종대 ( Jong-dae Lee ) 충북대학교 산업과학기술연구소 2019 산업과학기술연구 논문집 Vol.33 No.2
In this study, the electrochemical properties of Poly(vinyl chloride)(PVC) coated Mesocarbon Microbeads (MCMB) were investigated as anode material in lithium ion batteries. PVC with various compositions (MCMB/PVC=1:1, 1:1.5 and 1:2 wt/wt%) was prepared to coat the surface of MCMB using tetrahydrofuran as the solvent. Prepared composites were analysed by PSA and SEM. The electrochemical characteristics of the anode materials were investigated by initial charge/discharge, cycle, rate performance, cyclic voltammetry and electrochemical impedance spectroscopy tests in the electrolyte of LiPF6 (EC:DEC=1:1 vol%). The anode electrodes (MCMB/PVC=1:1.5 wt/wt%) had better rate performance (5 C/0.2 C=72.7%) than others anode materials.
이태헌(Tae Heon Lee) 한국경제연구학회 2021 한국경제연구 Vol.39 No.2
본고는 감세정책이 실업률 감소에 미치는 영향을 성․연령별로 구분하여 분석하였다. 한국의 소득세법과 사회보장제도에 부합하도록 평균한계소득세율(AMTR)을 구성하고 서술적 접근방법을 통해 외생적인 세법 변경 사례를 식별하였다. AMTR의 1%p 인하가 성․연령별로 실업률에 어떠한 영향을 주는지 분석하기 위해 AMTR 충격의 대리변수를 사용하여 Proxy-SVARs(Structural Vector Auto-Regressions)를 실시하였다. 분석결과 남성과 여성 모두에서 연령그룹별로 상이한 실업률 충격반응이 도출되었다. 특히, 15~29세 연령그룹은 타 연령그룹에 비해 강하고 유의한 반응을 얻었는데, 남성 15~29세 연령그룹은 전체 남성 대비 약 4.8배, 여성 15~29세 연령그룹은 전체 여성 대비 약 1.9배에 달하는 충격반응을 얻었다. 이를 바탕으로 정량적 분석방법(quantitative-accounting)을 통해 저출산 및 고령화로 인한 인구구조 변화가 한계세율 인하 정책의 실업률 감소효과를 지속적으로 약화시키고 있음을 확인하였다. This study investigated the effect of tax reduction policy on lowering the unemployment rate by gender and age groups. The Average Marginal Tax Rates (AMTRs) were constructed in accordance with Korea’s Income Tax Act and social security system, and cases of exogenous tax law changes were identified with a narrative approach. To analyze how a 1% point reduction in AMTRs affects the unemployment rate by gender and age groups, Proxy-SVARs (Structural Vector Auto-Regressions) were conducted using proxy variables of AMTRs’ shock. Results show distinctive shock responses of the unemployment rate according to age groups in both males and females. In particular, the 15~29 age group received strong and significant shock responses compared to other age groups, with the male 15~29 age group receiving about 4.8 times more shock responses than that of total male and the female 15~29 age group receiving about 1.9 times more shock responses than that of total female. Based on these results, the quantitative-accounting approach confirms that demographic changes caused by lower birth rates and population aging continue to weaken the unemployment reduction effect of the marginal tax rate reduction policy.
IC-임베디드 PCB 공정을 사용한 DVB-T/H SiP 설계
이태헌(Tae-Heon Lee),이장훈(Jang-Hoon Lee),윤영민(Young-Min Yoon),최석문(Seog-Moon Choi),김창균(ChangGyun Kim),송인채(In-Chae Song),김부균(Boo-Gyoun Kim),위재경(Jae-Kyung Wee) 大韓電子工學會 2010 電子工學會論文誌-SD (Semiconductor and devices) Vol.47 No.9
본 논문에서는 유럽에서 사용되는 이동형 디지털 방송인 DVB-T/H 신호를 수신 및 신호처리 가능한 DVB-T/H SiP를 제작하였다. DVB-T/H SiP는 칩이 PCB 내부에 삽입될 수 있는 IC-임베디드 PCB 공정을 적용하여 설계되었다. DVB-T/H SiP 에 삽입된 DVB-T/H IC는 신호를 수신하는 RF 칩과 어플리케이션 프로세서에서 활용할 수 있도록 수신된 신호를 변환하는 디지털 칩 2개를 원칩화한 모바일 TV용 SoC 이다. SiP 에는 DVB-T/H IC를 동작하기 위해 클럭소스로써 38.4㎒의 크리스탈을 이용하고, 전원공급을 위해 3㎒로 동작하는 DC-DC Converter와 LDO를 사용하였다. 제작된 DVB-T/H SiP는 8㎜ × 8㎜ 의 4 Layer로 구성되었으며, IC-임베디드 PCB 기술을 사용하여 DVB-T/H IC는 2층과 3층에 배치시켰다. 시뮬레이션결과 Ground Plane과 비아의 확보로 RF 신호선의 감도가 개선되었으며 SiP로 제작하는 경우에 Power 전달선에 존재하는 캐패시터와 인덕터의 조정이 필수적임을 확인하였다. 제작된 DVB-T/H SiP의 전력 소모는 평균 297㎽이며 전력 효율은 87%로써 기존 모듈과 동등한 수준으로 구현되었고, 크기는 기존 모듈과 비교하여 70% 이상 감소하였다. 그러나 기존 모듈 대비평균 3.8㏈의 수신 감도 하락이 나타났다. 이는 SiP에 존재하는 DC-DC Converter의 노이즈로 인한 2.8dB의 신호 감도 저하에 기인한 것이다. This paper reports the fabrication of a DVB-T/H System in Package (SiP) that is able to receive and process the DVB-T/H signal. The DVB-T/H is the European telecommunication standard for Digital Video Broadcasting (DVB). An IC-embedded Printed Circuit Board (PCB) process, interpose a chip between PCB layers, has applied to the DVB-T/H SiP. The chip inserted in DVB-T/H SiP is the System on Chip (SoC) for mobile TV. It is comprised of a RF block for DVB-T/H RF signal and a digital block to convert received signal to digital signal for an application processor. To operate the DVB-T/H IC, a 3㎒ DC-DC converter and LDO are on the DVB-T/H SiP. And a 38.4㎒ crystal is used as a clock source. The fabricated DVB-T/H SiP form 4 layers which size is 8㎜ × 8㎜. The DVB-T/H IC is located between 2nd and 3rd layer. According to the result of simulation, the RF signal sensitivity is improved since the layout modification of the ground plane and via. And we confirmed the adjustment of LC value on power transmission is necessary to turn down the noise level in a SiP. Although the size of a DVB-T/H SiP is decreased over 70% than reference module, the power consumption and efficiency is on a par with reference module. The average power consumption is 297㎽ and the efficiency is 87%. But, the RF signal sensitivity is declined by average 3.8㏈. This is caused by the decrease of the RF signal sensitivity which is 2.8㏈, because of the noise from the DC-DC converter.