http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이민우,배재성,이수용,이석준,전부일,Lee, Min-Woo,Bae, Jae-Sung,Lee, Soo-Yong,Lee, Seok-Joon,Jeon, Boo-Il 항공우주시스템공학회 2008 항공우주시스템공학회지 Vol.2 No.1
The three-dimensional finite element modeling of a composite rotor blade is very hard and requires much computation effort. The efficient method to model a composite beam is necessary for the dynamic and aeroelastic analyses of rotor blades. In this study, the beam modeling method of a composite rotor blade is studied using VABS. The computer program, VABS (Variational Asymptotic Beam Section Analysis), uses the variational asymptotic method to split a 3-D nonlinear elasticity problem into 2-D cross-sectional analysis and 1-D nonlinear beam problem. The VABS can produce the sectional stiffness coefficients of composite rotor blades with various cross section and initial twist/curvatures, and recover the original 3-D distribution of displacement/strain/stress fields. The results of various cross section beams show that VABS gives us the accurate results comparared to commercial codes and does not need much computation effort. It can be concluded that VABS provides the efficient method to establish the FE model of a composite rotor blade.
이민우,임권빈,Lee, Min-U,Im, Gwon-Bin 한국설비기술협회 1997 설비 : 공조ㆍ냉동ㆍ위생 Vol.14 No.12
반도체공장과 제약공장에서 나오는 특수배수의 해설을 하고 그처리방법의 예를 기술하였다. 반도체제조배수에는 현상배수, 불소배수 및 CMP배수등을 설명하였고 생물처리와 물리화학처리의 예를 나타냈다. 또한 제약공장배수에서는 항생물질제조배수, 고농도배수 및 착색배수의 처리예로서 증류법과 메탄발효법등을 소개하였다.
SoC 전원 관리를 위한 인덕터와 커패시터 내장형 100MHz DC-DC 부스트 변환기
이민우,김형중,노정진,Lee, Min-Woo,Kim, Hyoung-Joong,Roh, Jeong-Jin 대한전자공학회 2009 電子工學會論文誌-SD (Semiconductor and devices) Vol.46 No.8
본 논문은 SoC 전원 관리를 위한 고성능 DC-DC 부스트 변환기 설계에 관한 것이다. DC-DC 변환기에서 일반적으로 전하 축전용으로 사용되는 인덕터와 커패시터를 칩 안에 집적하기 위해 그 크기를 크게 감소시키고, 스위칭 주파수를 100MHz로 하였다. 고속 동작에서 전압 방식의 제어를 선택하여 신뢰성을 높였으며 적절한 주파수 보상으로 안정적인 동작 특성을 확보하였다. 설계한 DC-DC 변환기는 thick gate oxide 옵션이 포함된 0.18${\mu}m$ CMOS 표준 공정으로 제작하였다. 내부 필터 커패시터를 포함한 칩의 면적은 8.1$mm^2$ 이고, 제어기가 차지하는 면적은 1.15$mm^2$ 이다. 부하 전류 300mA 이상에 대하여 4V의 출력을 얻는 변환기의 최대 효율은 76% 이상, load regulation은 100mA의 변화에 대하여 0.012% (0.5mV) 의 특성을 갖는다. This paper presents a design of a high performance DC-DC boost converter as a power module for SOC designs. It applied to this chip that reduced inductor and capacitor for integrating on a chip, and it operates with a switching frequency of 100MHz. It has reliability and stability in high switching frequency. The controller of DC-DC boost converter is designed by voltage-mode control method and compensated properly. The designed DC-DC converter is fabricated with the 0.18${\mu}m$ standard CMOS technology with a thick-gate oxide option. The overall die size is 8.14$mm^2$, and controller size is 1.15$mm^2$. The converter has the maximum efficiency over 76% for the output voltage of 4V and load current larger 300mA. The load regulation is 0.012% (0.5mV) for the load current change of 100mA.
하이힐을 자주 착용하는 20대 여성의 허리, 무릎, 발목 및 발가락 통증, 다리 길이 그리고 족저압과의 상관분석
이민우,정연우,Lee, Min-woo,Jeong, Yeon-woo 대한정형도수물리치료학회 2020 대한정형도수물리치료학회지 Vol.26 No.2
Background: The purpose of this study is to examine the correlation between high heels and body imbalance among female college students in their twenties who mainly wear high heels and prevent associated problems. Methods: The subjects included 89 female college students in their twenties. They were measured in plantar pressure with a gait analyzer. Their legs were measured in length with a tape measure. Their pain intensity and pain frequency were measured in visual analog scale and in pain rating score. Results: There were statistically positive correlations between right leg length and low back pain frequency (p<.05) and negative correlations between the left hindfoot and low back pain frequency (p<.05). There were statistically positive correlations between right leg length and knee pain frequency (p<.05) and positive correlations between the ankle pain intensity and right leg length (p<.05). Conclusion: The stronger the pain was in the ankle, the stronger and more frequent their lumber pain was. When the pressure of the left heel was lower, the frequency of lumbar pain increased.
무인화 무기체계의 안정적인 운용을 위한 Cybersecurity 및 Anti-Tamper의 적용
이민우,Lee, Min Woo 한국시스템엔지니어링학회 2020 시스템엔지니어링학술지 Vol.16 No.1
Due to the population of the Republic of Korea is getting less, the shortage of available troops has become a big issue. In response to this, the need for Unmanned weapon systems is rising. To operate an Unmanned weapon system near borderlines or low altitude, it is necessary to protect not only the system itself but also operational information communicated between the Unmanned system and control station, so that they should be safe using Cybersecurity measures. Besides, it is critical to protect a few core technologies applied to Unmanned weapon systems throughout the Anti-Tamper measures. As the precedent studies only focus partially, Cybersecurity or Anti-Tamper, it is acknowledged that comprehensive studies are needed to be conducted. This study is to incorporate both concepts into Korea's defense acquisition process. Specifically, we will outline the concepts and needs of Cybersecurity and Anti-Tamper, and briefly present ways to apply them simultaneously.
Ag(II)를 매개체로 사용하는 전기화학적 매개산화에 의한 NO<sub>x</sub> 제거
이민우,박소진,이근우,최왕규,Lee, Min-Woo,Park, So-Jin,Lee, Kune-Woo,Choi, Wang-Kyu 한국방사성폐기물학회 2011 방사성폐기물학회지 Vol.9 No.3
전기화학적으로 생성되는 $Ag^{2+}$를 사용하는 MEO 공정에 의한 NO 제거에 전류밀도, $AgNO_3$ 농도, 세정 용액의 유속 및 NO-공기 혼합가스 유속이 미치는 영향을 조사하였다. 전류밀도가 증가할수록 NO의 산화 반응 속도 및 제거 효율이 증가하였으며, 0.1 M 이상의 $AgNO_3$ 농도 조건에서 ㅍ 농도가 NO의 제거 효율에 미치는 영향은 무시할 만 하였다. 세정용액의 유속이 증가할수록 NO의 제거효율은 점진적으로 증가한 반면에 NO-공기 혼합가스의 유속이 증가할수록 NO의 제거효율은 점진적으로 감소하였다. 실험 범위 내에서 도출한 최적조건을 적용한 MEO 공정 및 3 M 질산 흡수 공정을 복합적으로 적용하여 NO-공기 혼합가스를 처리하였으며, NO 및 $NO_x$의 제거 효율은 각각 95% 및 63%를 얻었다. The effects of the applied current density, the $AgNO_3$ concentration, the scrubbing liquid flow rate and the NO-air mixed gas flow rate on the NO removal efficiency were investigated by using $Ag^{2+}$ mediated electrochemical oxidation (MEO). Results showed that the NO removal efficiency increased with increasing the applied current density. The effect of the $AgNO_3$ concentration on the NO removal efficiency was negligibly small in the concentration of $AgNO_3$ above 0.1 M. When the scrubbing liquid flow rate increased, the NO removal efficiency was gradually increased. On the other hands, the NO removal efficiency decreased with increasing the NO-air mixed gas flow rate. As a result of the treatment of NO-air mixed gas by using the MEO process with the optimum operating condition and the chemical absorption process using 3 M $HNO_3$ solution as a scrubbing liquid, the removal efficiency of NO and $NO_x$ was achieved as 95% and 63%, respectively.