http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
EPON 기반 홈게이트웨이를 이용한 댁내 망에서의 방송통신 융합 서비스
박완기,김대영,Park Wanki,Kim Daeyoung 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.6
본 논문에서는 액세스 망 인터페이스로 EPON 정합을 기본으로 하는 홈 네트워크에서 방송 서비스와 IP 데이터 서비스를 융합하는 것에 초점을 두고자 한다. 본 논문에서는 액세스 망에서는 오버레이 전송 방법을 이용하고 홈 네트워크에서는 멀티캐스트 그룹 관리 프로토콜인 IGMP와 IGMP 스누핑 기능을 이용함으로써 액세스 망에서뿐만 아니라 댁내에서도 방송 서비스와 데이터 서비스를 융합시킬 수 있는 새로운 구조를 제안한다. 또한, 홈 게이트웨이를 통해 댁내 방송 서비스를 지원하기 위한 일련의 방법 및 절차에 대하여 설명한다. 본 논문에서 제안하고자 하는 방법은 다음의 3 가지로 구성되어 있다. I) 방송신호와 인터넷 데이터의 오버레이 전송 모델, ii) 다중 튜너 시스템을 이용하는 튜너/변화 모듈에서 특정 방송 채널을 선택하고 선택된 방송 스트림을 IP 멀티캐스트 패킷으로의 변환, iii) 변환된 IP 멀티캐스트 패킷을 L2 이더넷 홈 게이트웨이의 코어 모듈인 L2 이더넷 스위치로 보내고 IGMP 스누핑 기능을 이용하여 L2 멀티캐스트 처리 방법에 의하여 목적지 포트로의 전송. In this paper, we focus on supporting the convergence of broadcasting and communication in home network systems with E-PON based home gateway. We propose a new architecture to provide broadcasting and data services in integrated home network using overlay transport mechanism in access network and If multicast techniques of IGMP and IGMP snooping in home network. We also detail a set of mechanisms and procedures for home broadcasting service through the home gateway system. Our new scheme is composed of three parts: a) an overlay transmission model of video broadcasting signals (satellite and/or cable TV) and Internet data, b) to select a specific video broadcasting channel and to make of the selected video broadcasting stream into IP multicast packets in tuner/conversion module using multiple tuner system and c) to transfer the converted If multicast packets to L2 switch of home gateway's core module and to send them out to target port(s) by L2 multicast using IGMP snooping.
ATM 기반 MPLS 시스템의 가입자 채널 확장을 위한 출력 방향 패킷 처리 장치 설계
박완기(Wan-Ki Park),최창식(Chang-sik Choi),최병철(Byeong-cheol Choi),곽동용(Dong-yong Kwak),김대영(Dae-Young Kim) 한국정보과학회 2002 한국정보과학회 학술발표논문집 Vol.29 No.2Ⅲ
ACE2000 MPLS 시스템은 대용량 ATM 교환 시스템인 ACE2000 ATM 교환시스템에 MPLS 기능을 부가함으로써 사용자들에게 차별화 된 서비스를 제공할 수 있는 시스템이다. MPLS 시스템에서는 채널 사용의 유연성과 채널 자원의 효율적인 사용을 위해 VC 머징 기능을 요구하고 있다. 이를 위해 ACE2000 MPLS 시스템에서는 출력 방향 패킷 처리기에 VC 머징 기능을 구현하여 적용하고 있다. 구현된 VC 머징 장치는 고성능 SAR 소자를 이용하였다. VC 머징 장치는 ATM 셀 구조로 입력되고, 입력된 ATM 셀은 고성능 SAR 소자에 의해 AAL-5 유형의 패킷으로 변환되어 VC 머징 제어기로 입력된다. VC 머징 제어기에서는 패킷 입력부로부터 패킷을 받아들여 채널 연결 설정 정보에 따른 VC 머징 기능을 수행하도록 패킷을 처리한다. 이 VC 머징 제어기에서의 패킷 처리 시 스위치 포트의 Full Mesh 연결로 인해 발생되는 채널 자원의 가소 문제를 해결하고, 채널 자원을 증대시키기 위해 2 단계의 룩업 과정을 거치는 패킷 제어 기능을 수행한다. 패킷 제어기에 의해 처리된 패킷은 또 하나의 고성능 SAR 소자로 구성되어 있는 패킷 출력부로 전달되어 셀 분할(Segmentation) 과정을 거쳐 ATM 형태로 다음 레이블 스위치 라우터로 전달 되도록 물리층 보드로 전달된다. 본 논문에서는 ATM 교환 시스템을 기반으로 MPLS 시스템에서 채널 자원의 증대를 위한 출려방향 패킷 처리장치에 대하여 제안한다.
박완기,최안나,손성애,권용훈,강은숙,박정길 대한치과재료학회 2017 대한치과재료학회지 Vol.44 No.2
This study investigated the colors and mechanical properties of layered dental composites. Four nanocomposite resins (Aelite LS, Grandio, Tetric EvoCeram, Filtek Z350XT) and a silorane-based composite resin (P90) were used for overlying and underlying materials, respectively, with different thickness combinations. Colors, translucency parameter (TP), flexural and compressive properties were evaluated. All tested specimens had different color coordinates, although all were of A3 shade. Color coordinates and TP values of layered specimens better matched those of the corresponding overlying product as the thickness of the overlying product was increased. High TP values were related with high b* value differences between specimens (p<0.05). Both flexural strength and modulus, compressive strength and modulus of layered specimens with different thickness combinations were mostly lower than those of the corresponding overlying products, respectively, in their non-layered state.
다양한 물리 접속을 지원하는 네트워크 프로세서 기반 포워딩 엔진 구현
박완기,김대영,Park Wanki,Kim Daeyoung 대한전자공학회 2005 電子工學會論文誌-TC (Telecommunications) Vol.42 No.5
네트워크 프로세서는 기존의 네트워크 시스템들이 하드웨어적인 처리로 만족시키던 Wire-Speed의 패킷 처리 성능과 소프트웨어적인 처리로 만족시키던 네트워크 서비스에 대한 유연성을 동시에 만족시킬 수 있는 유일한 대안으로 제시되고 있다. 본 논문은 네트워크 장비를 이러한 네트워크 프로세서를 이용하여 구현함으로써 Wire-Speed의 패킷 처리가 가능하고 다양한 인터페이스가 수용 가능한 것으로서, 패킷 포워딩 엔진 보드의 구현 및 시험 결과를 언급하였다. 초고속 광 가입자망 시스템의 가입자 정합 장치에는 POS(Packet Over SONET) 인터페이스, 기가비트 이더넷 인터페이스 및 EPON(Ethernet Passive Optical Network) 인터페이스 등 다양한 가입자 인터페이스가 존재한다. 따라서, 광 가입자 망 시스템에 사용되어지는 패킷 포워딩 엔진은 다양한 가입자 인터페이스를 수용할 수 있어야 함과 동시에 고속의 패킷 포워딩 기능이 가능하여야 한다. 본 논문에서 제안하는 시스템은 쪽 보드(Daughter Board)의 형태로 물리 층 기능을 구현하고, 이 물리 층 기능 모듈의 식별자 인식을 통하여 네트워크 프로세서의 물리 인터페이스가 탑재된 기능 모듈과 정합할 수 있는 인터페이스로 소프트웨어적으로 설정하도록 한다. Recently, new concept, NP(Network Processor) was emerged into communication systems to cope with the various service requirements from Internet users. NP is an unique promising technique to capable of implementing of the packet processing in wire-speed and providing the flexibility for supporting the newly network services, having satisfied with implementation using hardware and software respectively in past, This paper deals with the implementation techniques and evaluation results of the line card capable to do packet forwarding function with packet processing power of wire-speed and applicable to various physical interfaces. There are several interfaces of POS, Gigabit ethernet and EPON in E-OLT(EPON Optical Line Terminal) system of PATH(Photonic Access To Home) network. Therefore, the E-OLT's packet forwarding engine have to support various subscriber's interface in wire speed. Our system is implemented the subscriber's card in daughter board and the setup procedure is done by system firmware based on the module's identifier acquired from installed physical board.