http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박승화 ( Seung Hwa Park ),유지훈 ( Ji Hun Yoo ),장원준 ( Won Jun Jang ),김웅섭 ( Woongsup Kim ) 한국정보처리학회 2017 한국정보처리학회 학술대회논문집 Vol.24 No.2
본 논문에서는 고속도로에서의 방향성을 고려하여 저전력형 가로등 제어 시스템을 설계하고 구현했다. 본 연구에서 제시한 시스템은 조도 센서와 적외선 센서를 이용해 디밍이 가능하고, 차량의 이동 방향에 따라 해당 방향의 가로등이 점등되는 시스템으로 야간에서 가로등에 소비되는 전력량을 줄여 에너지 효율을 향상시킬 수 있음을 확인하였다.
신재생에너지의 에너지 하베스팅을 위한 DPP시스템의 구성과 효율계산
박승화(Seung-Hwa Park),이현재(Hyun-Jae Lee),손진근(Jin-Geun Shon) 대한전기학회 2018 전기학회논문지 P Vol.67 No.3
Energy harvesting technology is drawing attention as a means of collecting various eco-friendly energy and accumulating residual energy. Recently, differential power processing (DPP) is being developed as part of energy harvesting. This is being studied as a solution to the loss of power generation between power modules and the problems caused by module small losses depending on the size of power production. In this paper, we propose the necessity of the DPP by comparing and analyzing energy harvesting related module integration system and power supply efficiency of DPP. The power efficiency of the converter and the power difference between the wind power and the photovoltaic power supply have been changed to demonstrate the effectiveness of the proposed system.
외부개방데이터 연계를 통한 BIM/GIS 상호운용 플랫폼 확장에 관한 연구
박승화(Seung-Hwa Park),홍창희(Chang-Hee Hong) 한국산학기술학회 2017 한국산학기술학회논문지 Vol.18 No.3
ICT의 발달과 사물인터넷(IoT), 센서 네트워킹 기술 등이 차세대 산업경쟁력으로 자리잡아감에 따라 각 지자체의 스마트시티 도입이 가속화 되고 있다. 스마트시티를 운영하기 위해서는 도시통합운영센터가 요구되어 지고 그 기반에 통합플랫폼이 존재한다. 기존 스마트시티 플랫폼은 주로 2차원 지도 기반으로 CCTV정보, ITS 교통카메라 정보 등을 이용하여 서비스를 제공하고 있다. 보다 고도화된 스마트시티 서비스 제공을 위해 3차원 지도 정보, 건물과 시설물 단위정보, 대민서비스를 위한 공공데이터포탈과의 연계 등이 요구되고 있다. 본 논문에서는 스마트시티 통합 플랫폼과 관련된 국내외 관련 개발 현황을 살펴보고, 현재 개발 중에 있는 BIM/GIS 상호운용 플랫폼과 외부데이터 연계방안을 제시하였다. BIM/GIS 플랫폼은 지도기반 위치정보와 건물정보를 연계하여 실내외의 끊임없는 공간정보서비스를 가능하게 한다. 본 플랫폼에 적용된 외부데이터는 V-World, 서울시 열린 데이터, 건축데이터개방이며, BIM/GIS 플랫폼과 연계하여 국토계획 구역정보, 서울시 대기오염정보, 건축물대장정보 등을 확인하였다. 이를 통해 고도화된 신개념 스마트시티 서비스를 제공할 수 있는 BIM/GIS 통합플랫폼의 개발 방향에 대해 제시하고자 한다. Because the "Internet of Things" and sensor network technology have become a new generation industry competitiveness with a development of Information Communication Technology, each local autonomous entity is trying to adopt a Smart City quickly. This requires an integrated platform inside of a smart city operation center. Established Smart City platform provides various services using CCTV information and ITS transportation information based on a two-dimensional map. The provision of advanced Smart City services will necessitate three-dimensional map information, building and facilities unit information, linked information with public data portal for service to the public. In this paper, the authors reviewed development trends of Smart City integrated platform and proposed mashup methods between BIM/GIS interoperability platform and external open data. BIM/GIS platform can provide spatial information services for indoor and outdoor seamlessly because it was developed based on GIS spatial data with BIM data. The linked external open data are V-World data, Seoul Open Data, and Architectural Data Open. Finally, the authors proposed the direction of development for BIM/GIS integrated platform to provide advanced Smart City services.
실시설계단계에서 수량산출을 위한 복합벽체 자동분할에 관한 연구
박승화(Seunghwa Park),김흥수(Heungsoo Kim),윤두영(Dooyung Yoon) (사)한국CDE학회 2015 한국CDE학회 논문집 Vol.20 No.2
When Building Information Modeling (BIM) was introduced at the early stage, it was only utilized as a three-dimensional visualization tool. Nowadays, however, BIM is being studied for increasing design productivity and managing enormous information on building life cycle. One of the representative research is developing ‘common prototype BIM libraries’. BIM data made of common prototype libraries should be utilized in various ways, quantity takeoff, code checking, energy analysis and so on. However, common prototype BIM libraries are not enough to estimate accurate cost. For example, composite wall libraries should be divided into several single objects, wall structure and finishes, for the quantity takeoff and construction cost calculation. In this paper, we are suggesting an automated division algorithm of composite wall and developing a system prototype for it. This study is expected to reduce extra modeling work and contribute to fast and accurate cost calculation in the construction.
건축부재 형상정보 교환을 위한 개방형BIM 기반의 매핑 시스템 개발
박승화(Seunghwa Park),김인한(Inhan Kim),이지아(Jiah Lee) (사)한국CDE학회 2014 한국CDE학회 논문집 Vol.19 No.2
Parametric modeling is one of BIM’s characteristics and BIM have being utilized for constructability analysis, energy efficiency analysis, and so on in diverse construction field. However, parametric information"s interoperation is not solved until now because different BIM tools have specific algorithm and methods to generate geometric information. To solve the problem, previous research suggested IFC-XML methodology. In this paper, authors studied connections between IFC-XML structure and script-based modeling commends to make libraries in commercial BIM tools such as ArchiCAD<SUP>TM</SUP> and Digital Project<SUP>TM</SUP>. In addition, they made commends mapping tables to exchange geometry information of architectural components. Moreover, mapping system was developed to certify the mapping tables which is classified modeling commends. Finally, translated architectural component model was confirmed using exchanged geometry information in browser.