http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Simulation of Various Baffle Types in a Constructed Wetland Sedimentation Tank using CFD
노태균,전제찬,김이형 한국습지학회 2016 한국습지학회지 Vol.18 No.3
Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.
노태균,박대서,김준태,조병관 한국비파괴검사학회 2023 한국비파괴검사학회지 Vol.43 No.2
The size of an air cell in an egg is an important indicator of its freshness and is often used as a grading index. Currently, the Haugh Unit (HU) test is the most common method for evaluating egg freshness; however, it is destructive and time-consuming, and not all eggs can be tested. To overcome these limitations in evaluating egg quality, non-destructive measurement methods have been explored. In this study, a longwave infrared thermal imaging method was used to predict HU by measuring air cell size. After performing image enhancement by forcing airflow through fans, the thermal image of the egg air cell was used to calculate the size of the air volume of the cell. The results indicated that the size of the air cell increased with storage time at all tested temperatures (5, 15, and 25℃). Further, the correlation between the calculated size and actual volume of the air cell was evaluated using an R² value of 0.946 and SEP of 0.028%. The result indicated that the developed non-destructive egg air cell measurement method has the potential to be a rapid and accurate prediction tool for egg freshness, suggesting that this method is a suitable alternative to the destructive HU measurement method. 현재 국내에서 가장 일반적인 계란의 신선도 평가 방법은 호우유닛(Haugh Unit, HU) 검사이지만, 파괴적이고 측정에 시간이 많이 소요되며 전수 검사를 할 수 없다는 단점이 있다. 비파괴적인 신선도 측정방법으로 계란 둔단부 내에 위치하는 기실의 크기를 측정하여 신선도를 판단할 수 있는데 아직까지 비파괴 측정기술이 개발되어 있지 않다. 계란 기실의 비파괴적 측정방법을 개발하기 위해, 본 연구에서는 장파장 대역(8~14μm)에서 작동하는 열화상 카메라와 강제 공기 유동 방식을 융합하여 계란의 기실 크기를 비파괴적으로 측정하는 방법을 개발하였다. 기실의 크기는 계란의 저장 온도(5℃, 15℃, 25℃)에 관계없이 저장기간이 길어질수록 크기가 증가하는 경향을 보인다. 구축된 측정 장치를 이용하여 계란 기실의 크기를 비파괴적으로 예측하였을 때, 실제 기실 크기와의 상관관계가 R²=0.946, SEP=0.028%로 나타났다. 본 연구결과는 열화상 및 강제 공기 유동 방식을 활용했을 때, 신선도 지표 중 하나인 계란 기실 크기를 신속하고 정확하게 비파괴 측정할 수 있음을 보여주었다.
노태균,이안석,정수정,조승권,장성철,Noh, T.G.,Lee, A.S.,Jung, S.J.,Cho, S.K.,Chang, S.C. 한국전자통신연구원 2016 전자통신동향분석 Vol.31 No.1
최근 ITU-R은 IMT-2020으로 지칭되는 5G 이동통신의 비전을 제시하였다. 5G 이동통신은 기존의 이동통신과 달리 높은 전송속도 및 높은 전송효율이 요구되는 서비스 외에 짧은 전송지연을 요구하는 서비스와 높은 연결 밀도를 요구하는 서비스를 5G 이동통신의 3대 서비스로 규정하고 있다. 본고에서는 5G 이동통신의 3대 서비스 중 하나인 저지연 서비스를 제공하기 위해 3GPP의 SA와 RAN에서 논의되고 있는 저지연 기술과 표준화 동향을 논한다.
인공습지의 비용 효율적 초기 침강지 설계를 위한 최적 도류벽 구조 모의
노태균,전제찬,김이형 한국습지학회 2017 한국습지학회지 Vol.19 No.4
본 연구에서는 비용효율적인 인공습지의 설계를 위하여 초기 침강지 내 다양한 도류벽형태에 따른 인공습지의 사수역 및 입자상 물질의 제거효율을 전산유체역학(Computational Fluid Dynamics, CFD)을 통해 연구하였다. 그 결과, 초기 침강지에서 도류벽의 형태는 유입 유속에 영향을 미치며, 침전률에도 큰 영향을 미치는 것으로 분석되었다. 2 ㎛ 와 5 ㎛ 와 같은 미세한 입자에서는 수평으로 설치한 도류벽에서 침전률이 높았으며, 10 ㎛ 와 20 ㎛ 크기의 큰 입자는 수직형 도류벽에서도 높은 침전률을 나타내었다. 또한, 수직형 도류벽의 경우 좁은 면적에 침전이 집중적으로 이루어지기에 다른 형태에 비해 유지관리가 효율적일 것으로 판단되었다. 이에 인공습지의 설계 목적에 따라 가장 적절한 도류벽의 형태를 선정하여 설계해야 할 것으로 보여진다. In this study, the removal efficiency of the wetland in terms of particulate matter and dead water zone through the application of baffles in the sedimentation were simulated with the use of Computational Fluid Dynamics (CFD) to determine the design of a cost-effective constructed wetland. As a result, it was analyzed that the application of the baffle in the sedimentation tank affect the flow and sedimentation rate. Fine particles such as 2 ㎛ and 5 ㎛ showed high sedimentation rate when the baffles are installed horizontally. large particles such as 10 ㎛ and 20 ㎛ showed also high deposition rate when the baffles are installed vertically. In addition, the vertical baffles is considered to be more efficient than other baffle types in terms of maintenance since the particulate matter are concentrated in narrow areas. Therefore, it is considered that the selection of the most applicable type of baffle depends on the design purpose of the wetland to be constructed.
3GPP LTE 및 LTE-Advanced 표준화 동향
노태균,고영조,이경석,안재영,김영진,No, Tae-Gyun,Go, Yeong-Jo,Lee, Gyeong-Seok,An, Jae-Yeong,Kim, Yeong-Jin 한국전자통신연구원 2008 전자통신동향분석 Vol.23 No.3
3GPP는 WCDMA의 3세대 이동통신 표준화 이후 HSDPA, MBMS, HSUPA 등의 기술을 지속적으로 추가하여 3세대 이동통신 시스템을 개량해 왔다. 또한 2005년부터는 OFDMA/SC-FDMA 전송방식을 기반으로 하는 LTE 표준화를 진행해 왔다. 현재는 ITU-R의 IMT-Advanced 표준을 위해 LTE를 개선한 LTE-Advanced를 준비하고 있다. LTE-Advanced는 IMT-Advanced 표준의 유력한 후보 중 하나로 사업자들의 폭넓은 지지를 받고 있다. 이에 본 고에서는 3GPP에서 추진하고 있는 LTE 표준 기술과 LTE-Advanced 표준화 동향을 살펴보고자 한다.
우정인,신동률,조용길,노태균 東亞大學校 大學院 1999 大學院論文集 Vol.24 No.-
본 논문에서는 PWM 인버터 구동 편측식 선형유도 전동기(이하 SLIM)의 공간백터 제어와 PI 제어를 통한 추력 제어를 행한다. 1차측 권선과 SLIM의 2차측 구조 사이에서 발생하는 공극길이의 떨림은 빠른 응답특성을 얻기위해서 최소화 되어야 한다. 먼저, SLIM의 전압방정식이 추력과 수직력 특성을 해석하기 위하여 d-q축 등가회로로서 나타내어진다. 또한, d-q축 등가회로의 모델링과 해석은 등가회로상에서 전류변동에 따른 강인한 과도 추력특성을 얻을 수 있다. 지령속도와 추력에 의한 SLIM의 직접구동 결과는 실험을 통해서 확인된다.