http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
구민호(Koo, Min-Ho),송윤호(Song, Yoon-Ho) 한국신재생에너지학회 2006 한국신재생에너지학회 학술대회논문집 Vol.2006 No.06
Accurate information on the ground surface temperature is essential for design of a borehole heat exchanger and thus ensuring the performance of a ground source heat pump system along with knowledge on thermal diffusivity and conductivity of ground. In this study we analyzed the shallow subsurface temperature monitoring data of 58 Korea Meteorological Administration synoptic stations. As a result, we compiled mean annual ground surface temperature distribution map using multiple regression analysis of the monitoring data.
열원의 대칭 배열에 따른 압출형 히트싱크의 방열성능 연구
구민예(Min Ye Ku),신헌충(Hon Chung Shin),이교우(Gyo Woo Lee) 대한기계학회 2016 大韓機械學會論文集B Vol.40 No.2
본 연구는 실험적인 방법과 열유동 해석 방법을 사용하여 대용량 압출형 히트싱크의 방열성능에 미치는 열원 대칭배열의 영향을 고찰하고, 이를 바탕으로 제조원가가 낮은 고효율의 히트싱크를 제안하고자 한다. 실험결과를 통해서 유사한 유효 유동단면적을 가지는 경우에 히트싱크의 전열면적이 방열성능에 큰 영향을 줌을 확인할 수 있었으며, 히트싱크의 양면 모두를 이용하는 방열이 훨씬 효과적인 방열이 가능함을 알 수 있었다. 또한, 대칭으로 열원을 배치한 경우가 비대칭 배치보다 효율적으로 방열됨을 알 수 있었다. 해석연구의 결과를 통해서는 실험결과와 정성적으로는 유사한 경향을 확인할 수 있었으며, 실험연구에서 확인하지 못한 질량유량별 및 투입열량별 추이, 단면과 양면 사용의 정량적 비교 등이 가능하였다. In this study we investigated the effects of symmetrically arranged heat sources on the heat release performances of extruded-type heat sinks through experiments and thermal fluid simulations. Also, based on the results we suggested a high-efficiency and cost-effective heat sink for a solar inverter cooling system. In this parametric study, the temperatures between heaters on the base plate and the heat release rates were investigated with respect to the arrangements of heat sources and amounts of heat input. Based on the results we believe that the use of both sides of the heat sink is the preferred method for releasing the heat from the heat source to the ambient environment rather than the use of a single side of the heat sink. Also from the results, it is believed that the symmetric arrangement of the heat sources is recommended to achieve a higher rate of heat transfer. From the results of the thermal fluid simulation, it was possible to confirm the qualitative agreement with the experimental results. Finally, quantitative comparison with respect to mass flow rates, heat inputs, and arrangements of the heat source was also performed.
구민성,최호림,Koo, Min-Sung,Choi, Ho-Lim Institute of Control 2015 제어·로봇·시스템학회 논문지 Vol.21 No.8
We present an output feedback controller for a class of nonlinear systems with uncertain nonlinearity and sensor noise. The sensor noise has both a finite constant component and a time-varying component such that its integral function is finite. The new design and analysis method is based on the matrix inequality approach. With our proposed controller, the states and output can be ultimately bounded even though the structure of nonlinearity is more general than that in the existing results.
에폭시 복합재료의 강화에 사용된 탄소나노튜브의 분산 개선에 미친 전단혼합의 영향
구민예(Ku, Min Ye),이교우(Lee, Gyo Woo) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.10
본 연구는 전단혼합과 초음파 처리를 통해 충전재의 분산을 증대시켜 복합재료 시편을 만들고, 분산의 적정 성을 판단하기 위해서 주사전자현미경 이미지를 이용하며, 인장실험을 통해 기계적 물성치를 측정하고 고찰하였다. 초음파 처리와 전단혼합 시간 증가를 통해서 개선된 공정으로 만들어진 시편의 경우, 충전재 분산에 대한 정성적인 평가인 SEM 이미지와 정량적인 평가인 인장시험 데이터의 상호 보완을 통해 충전재의 복합재료 수지 내에서의 적절 한 분산 여부를 판단할 수 있었다. 인장강도의 측정 결과에서는 충전재가 함유된 모든 시편이 Pure Epoxy 시편 보다 높은 인장 강도를 보였는데, 충전재 0.6wt%에서 가장 높은 인장강도 값을 나타냈다. 0.9wt%와 1.2wt% 시편은 Pure Epoxy 시편보다는 인장강도가 증가하였지만 0.6wt% 시편보다 작은 값을 보였다. 인장강성 측정 결과는 충전재의 함 유량이 높아질수록 증가하는 결과를 보였다. In this article, the effects of shear mixing on the dispersion improvement of the carbon nanotube fillers in epoxy composites were studied. Through the scanning electron microscope images showing the quantitative results and the tensile tests giving the qualitative data, we can see the dispersion improvement of the fillers. The composite specimen containing 0.6 wt% fillers shows the biggest value of tensile strength. For the tensile stiffness, the specimens containing more filler have the larger values of tensile stiffness.