http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장성호,이치훈,최성욱 한국항공우주학회 2014 한국항공우주학회 학술발표회 논문집 Vol.2014 No.11
본 논문은 틸트-덕트 수직이착륙 비행로봇의 플랫폼으로서 수직이착륙과 고속비행이 가능한 비행체 상세설계 결과를 기술한다. 본 연구에서는 형상설계, 소형 수냉식 엔진을 이용한 동력장치 설계, 전기계통 설계와 유동해석 및 구조해석 결과가 제시되었다. 제작된 비행체에 대한 지상시험을 수행하여 성능 및 내구성 시험을 수행하고 비행시험을 통한 비행성능 검증 및 제어 능력을 평가할 예정이다. The critical design have been conducted and a prototype vehicle has been fabricated. This paper focuses on the vehicle design, small liquid-type engine system, electric configuration and the CFC and structure analysis. The ground test for measuring various performance of vehicle and evaluating the endurance of power train will be conducted. The flying characteristics and controllability are going to evaluated by flight test.
방대한,이현석,이민수,이민호,이재만 항공우주시스템공학회 2023 항공우주시스템공학회지 Vol.17 No.4
This paper addresses the installation and modification design of airframe structures for new and modified equipment installations that are essential for aircraft performance improvement. Typical performance improvement equipment mounted on the exterior of the aircraft include antenna, radar, electro-optical/infrared (EO/IR), and self-protection system equipment, which require structural reinforcement, modification, and mounting design of the green aircraft for operation. In the interior of the aircraft, console and rack structures are modified or added according to user operation requirements. In addition, this is accompanied by the installation design of equipment to be replaced and added for performance improvement, and the according modification of environmental control system components for internal cooling. The engineering process and cases in which airworthiness was verified through the detailed design of airframe structures with structural integrity, operability, and maintainability of performance-improved aircraft are presented. 본 논문은 항공기의 성능개량에 필수 수반되는 신규 및 변경 장비 장착부에 기체구조물 개조 및 장착설계를 수행한 연구이다. 항공기 외부에 장착되는 대표적인 성능개량 장비로는 안테나, 레이더, 전자광학/적외선 표적지시장치(EO/IR) 및 자체방어체계 장비 등이 있으며, 운용을 위해서 기본항공기의 구조 보강, 개조 및 장착설계가 수행된다. 항공기 내부에는 사용자 운용 요구도에 맞게 콘솔과 랙 구조물이 개조 또는 추가된다. 또한 성능개량을 위해 교체 및 추가되는 장비의 장착설계와 이에 따른 내부 냉각을 위한 환경제어계통 구성품 개조가 수반된다. 성능개량 항공기의 구조건전성, 운용성 및 정비성이 확보된 기체구조물의 상세설계로 감항 적합성이 검증된 엔지니어링 과정과 사례를 제시하였다.
미세먼지 관측 임무를 위한 MIMAN 큐브위성 상세 설계
진성민(Sungmin Jin),강대은(Dae-Eun Kang),김극남(Geuk-Nam Kim),김나은(Naeun Kim),김영언(Young-Eon Kim),김푸름(Pureum Kim),안승민(Seungmin An),유한결(Han-Gyeol Ryu),박상영(Sang-Young Park) 한국항공우주학회 2021 韓國航空宇宙學會誌 Vol.49 No.12
본 논문에서는 한반도 주변의 미세먼지 관측 임무를 위한 3U 큐브위성인 MIMAN 설계안을 제시하였다. MIMAN의 주요 임무 목표는 높은 공간 해상도로 한반도 주변의 미세먼지를 관측하는 것이다. 이를 통해 천리안위성 2B호 데이터에서 구름을 제거할 수 있는 보조 자료를 제공하는 것이 최종 목표이다. 본 연구에서는 임무를 정의하고 임무 요구조건 및 제한 조건을 도출하였다. 운용 개념을 정의하였으며, 안정적인 운용을 위해 통신 안정성을 고려하였다. 위성에 문제가 생겼을 경우, 이를 지상에서 해결할 수 있도록 모든 운용 모드에서 UHF 통신이 가능하도록 설계하였다. 임무와 운용 개념 설계 결과를 바탕으로 시스템 설계안을 도출하였다. 시스템 요구조건을 만족시킬 수 있는 시스템 설계안 및 인터페이스를 제시하였다. 시스템 인터페이스의 경우 각 하드웨어의 데이터 특성을 고려하여 설계하였다. 시스템 버짓 분석을 수행하였으며, 이를 통해 시스템 안정성을 확인하였다. We presents a design of 3U cubesat MIMAN (Monochrome imaging for monitoring aerosol by nano-satellite) for aerosol monitoring mission with high spatial resolution. The main objective of MIMAN mission is to take images of aerosols around Korea and to provide auxiliary data for GK 2B cloud masking. For this mission, we derived mission requirements and constraints for the MIMAN mission. We designed the mission architecture and concept of operations. To reduce risk factors in space operation, we considered the safety of the communication. In every operation modes, UHF communication is available so that the cubesat can operate based on the ground commands. So, we can handle every problem at the ground station during mission operations. Based on the mission and concept of operations, we confirmed that the system design satisfied the system requirements. We designed the system interface considering data flow of each hardware, and evaluated the safety of the system with system budget analysis.
한국형발사체 액체엔진 연소기 및 터보펌프 시험설비 배치 및 설계에 대한 검토
한영민(Yeoung-Min Han),조남경(Nam-Kyung Cho),정용갑(Young-Gahp Chung),김승한(Seung-Han Kim),유병일(Byung-il Yu),이광진(Kwang-Jin Lee),김진선(Jin-Sun Kim),김지훈(Jihoon Kim) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
한국형발사체 추진기관 개발을 위한 연소기 연소시험설비와 터보펌프 실매질 시험설비의 배치 및 설계에 대해 간략히 기술하였다. 연소기 연소시험설비 및 터보펌프 실매질 시험설비에서 75톤급 액체로켓엔진의 부품인 연소기 및 터보펌프의 개발 및 인증시험을 수행할 예정이다. 연소기 및 터보펌프 시험설비의 유공압 설비, 제어계측 시스템, 시험 스탠드 그리고 부대설비에 대한 상세설계를 완료하였다. The result of design review and arrangement of a combustion chamber test facility(CTF) and a turbo-pump real propellant test facility(TPTF) is briefly described. The development/qualification tests of combustion chamber and turbo-pump for 75ton-class liquid rocket engine will be performed in CTF and TPTF. The critical design of hydraulic-pneumatic system, control and data acquisition system, test stand cell, and auxiliary facilities in CTF and TPTF was performed.