http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fangze Li,Shuhui Men,Shiwei Zhang,Juan Huang,Xuehua Puyang,Zhenqing Wu,Zhanbin Huang 한국미생물·생명공학회 2020 Journal of microbiology and biotechnology Vol.30 No.9
Low-quality soil for land reuse is a crucial problem in vegetation quality and especially to waste disposal sites in mining areas. It is necessary to find suitable materials to improve the soil quality and especially to increase soil microbial diversity and activity. In this study, pot experiments were conducted to investigate the effect of a mixed material of humic acid, super absorbent polymer and biochar on low-quality soil indexes and the microbial community response. The indexes included soil physicochemical properties and the corresponding plant growth. The results showed that the mixed material could improve chemical properties and physical structure of soil by increasing the bulk density, porosity, macro aggregate, and promote the mineralization of nutrient elements in soil. The best performance was achieved by adding 3 g·kg-1 super absorbent polymer, 3 g·kg-1 humic acid, and 10 g·kg-1 biochar to soil with plant total nitrogen, dry weight and height increased by 85.18%, 266.41% and 74.06%, respectively. Physicochemical properties caused changes in soil microbial diversity. Acidobacteria, Bacteroidetes, Chloroflexi, Cyanobacteria, Firmicutes, Nitrospirae, Planctomycetes, and Proteobacteria were significantly positively correlated with most of the physical, chemical and plant indicators. Actinobacteria and Armatimonadetes were significantly negatively correlated with most measurement factors. Therefore, this study can contribute to improving the understanding of low-quality soil and how it affects soil microbial functions and sustainability.
Liang, Xiaogan,Jung, Yeon-Sik,Wu, Shiwei,Ismach, Ariel,Olynick, Deirdre L.,Cabrini, Stefano,Bokor, Jeffrey American Chemical Society 2010 NANO LETTERS Vol.10 No.7
<P>We fabricated hexagonal graphene nanomeshes (GNMs) with sub-10 nm ribbon width. The fabrication combines nanoimprint lithography, block-copolymer self-assembly for high-resolution nanoimprint template patterning, and electrostatic printing of graphene. Graphene field-effect transistors (GFETs) made from GNMs exhibit very different electronic characteristics in comparison with unpatterned GFETs even at room temperature. We observed multiplateaus in the drain current−gate voltage dependence as well as an enhancement of ON/OFF current ratio with reduction of the average ribbon width of GNMs. These effects are attributed to the formation of electronic subbands and a bandgap in GNMs. Such mesoscopic graphene structures and the nanofabrication methods could be employed to construct future electronic devices based on graphene superlattices.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/nalefd/2010/nalefd.2010.10.issue-7/nl100750v/production/images/medium/nl-2010-00750v_0005.gif'></P>
( Yong Chen ),( Qingguo Liu ),( Tao Zhou ),( Bingbing Li ),( Shiwei Yao ),( An Li ),( Jing Lan Wu ),( Han Jie Ying ) 한국미생물 · 생명공학회 2013 Journal of microbiology and biotechnology Vol.23 No.4
In this work, a fibrous bed bioreactor with high specific surface area and good adsorption efficacy for S. cerevisiae cells was used as the immobilization matrix in the production of ethanol. In batch fermentation, an optimal ethanol concentration of 91.36 g/l and productivity of 4.57 g l-1 h-1 were obtained at an initial sugar concentration of 200 g/l. The ethanol productivity achieved by the immobilized cells was 41.93% higher than that obtained from free cells. Ethanol production in a 22-cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in packed-bed reactors, a maximum ethanol concentration of 108.14 g/l and a productivity of 14.71 g l-1 h-1 were attained at 35oC, and a dilution rate of 0.136 h-1 with 250 g/l glucose.
Ting Li,Xinjian Yuan,Rui Li,Jiankun Xiong,Shiwei Tao,Kanglong Wu 한국정밀공학회 2021 International Journal of Precision Engineering and Vol.22 No.6
Dissimilar 9% Cr heat-resistant steels (G115 and CB2) with good creep properties for ultra-supercritical steam turbines were butt-joined by tungsten inert gas welding. The microstructure of welded metal (WM) was quenched martensite without carbide precipitates and lath packets existed inside prior austenite grains (PAGs), which leaded to higher hardness of WM. Partially melted zone at G115 side was composed of untempered martensite within equiaxed PAGs. The lowest hardness occurred in both G115 and CB2 steels which was attributed to tempered martensite with many M 23 C 6 precipitates. The heat-affected zone consisted of three sub-grains and their microstructure was detailly analyzed in current work. As current increased from 130 to 150 A, both the tensile strength at room temperature and 650°C increased while strength had no obvious change with further increasing current. The values of 673 MPa and 309 MPa corresponded to the tensile stress with 150 A at room temperature and 650°C, respectively. The fracture mode of joints at room temperature was cleavage and ductile failure at 130 and 150 A, respectively. The high-temperature fracture surface at 150 A was composed of deep and fi ne dimples.