http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장영복,정태영,차기철,정형근,김성헌,김동진,유익근 한국물환경학회 2004 한국물환경학회지 Vol.20 No.4
The characteristics of H₂ production from livestock wastewater were investigated through an anaerobic acid forming process using Clostridium beijerinckii and the photosynthetic process using Rhodobacter sphaeroides. The submerged separation membrane was installed in the acid forming reactor. The photosynthetic process is composed of two reactors(photosynthetic reactor 1 and photosynthetic reactor 2) which is connected continually. The removal rate of COD and the production of volatile fatty acid(VFA) in the acid forming process were approximately 50% and 1000㎎/ L, respectively. The 70% of COD in the effluent of acid forming process was removed through the photosynthetic process. The production of H₂ in the photosynthetic reactor 1 and 2 was 50 and 25mLH₂/gVFA_(COD), respectively. The values of Y in acid forming reactor, photosynthetic reactor 1 and 2 was 0.2263, 0.0601 and 0.0393, respectively. The acetic acid and butyric acid produced in acid forming process were converted to H₂ by photosynthetic bacteria.
이기태,김장형,장재성 濟州大學校 工科大學 産業技術硏究所 1992 産業技術硏究報告 Vol.3 No.-
The current induced on a perfectly conducting strip excited by incident fields which are transverse magnetic (TM) wave or transverse electric (TE) wave to the strip axis are solved by three methods. The one is analytic and the others are numerical method: SIT (Spectral Iteration Technique), CGFFT (Conjugate Gradient Fast Fourier Transform). It is estimated accuracy of current values, as that are compared results of the analytic method with that of the numerical methods. The procedure involves the incorporation of subdmain basis functions associated with the current representation of a conducting strip. It is shown that significant improvements are achieved in the convergences of the CGFFT method when using sinc basis functions.
페놀분해 효모 Candida tropicalis PW-51의 분리 및 분해특성
김성빈,김치경,김희식,이창호,신기선,권시석,윤병대,오희목 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.6
본 연구는 페놀과 포름알데히드를 포함하는 페놀계수지 산업폐수의 생물학적 처리에 이용할 목적으로 포름알데히드의 존재하에서 페놀분해능이 우수한 효모를 sludge로부터 분리하여, 형태적 및 생리 생화학적 특징을 조사하여 Candida tropicalis PW-51로 동정하였다. 회분식 배양에서 C. tropicalis PW-51의 페놀 분해한계는 2,000 mg/ℓ이며, 58시간내에 완전히 분해하였다. C. tropicalis PW-51은 초기접종량이 9×10 exp (6) cells/㎖, 배양온도는 30℃, pH는 7.0에서 페놀 분해효율이 높았으며, 500~2,000 mg/ℓ의 페놀농도에서 조사된 페놀에 대한 평균 분해율은 페놀 1,000 mg/ℓ에서 45.5 mg/ℓ/h 가장 높았다. C. tropicalis PW-51의 페놀분해시 catechol 1,2-dioxygenase의 활성이 크게증가하므로 ortho-path-way에 의해 페놀을 분해하는 것으로 판단되었다. 따라서, C. tropicalis PW-51는 페놀계 수지 산업폐수의 생물학적 처리에 효과적으로 이용될 수 있는 균주로 사료된다. For the biological treatment of phenolic resin wastewater containing phenol and formaldehyde, a phenol-degrading yeast was isolated from the papermill sludge, and then identified as Candida tropicalis PW-51 according to morphological, physiological and biochemical properties. The strain was able to degrade high phenol concentrations up to 2,000 mg/ℓ within 58 hours in batch cultures. Phenol-degrading efficiency by the strain was maximum at the culture conditions of a final concentration of 9×10 exp (6) cells/㎖ 30℃ and pH 7.0. The mean degradation rate of phenol was highest at 45.5 mg/ℓ/h in 1,000 mg/ℓ phenol from 500 mg/ℓ to 2,000 mg/ℓ phenol. Because the enzyme activity of catechol 1,2-dioxygenase increased in the course of degradation of phenol, it seems that this strain degrades phenol via the ortho-cleavage of benzene ring. The isolate C. tropicalis PW-51 could be effectively used for the biological treatment of phenolic resin wastewater.
이기태,장재성,김장형 濟州大學校工科大學附屬産業技術硏究所 1992 尖端技術硏究所論文集 Vol.3 No.-
The current induced on a perfectly conducting strip excited by incident fields which are transverse magnetic (TM) wave or transverse electric (TE) wave to the strip axis are solved by three methods. The one is analytic and the others are numerical methodd; SIT (Spectral Iteration Technique), CGFFT (Conjugate Gradient Fast Fourier Transform). It is estimated accuracy of current values, as that are compared results of the analytic method with that of the numerical methods. The procedure involves the incorporation of subdmain basis functions associated with the current representation of a conducting strip. It is shown that significant improvements are achieved in the convergences of the CGFFT method when using sinc basis functions.
레이저 인터페로메타를 이용한 드릴링 머신의 틸팅에 관한 연구
이승수,손영지,장성규,전언찬 동아대학교 공과대학부설 생산기술연구소 1996 生産技術硏究所硏究論文集 Vol.1 No.2
This paper describes tilt angle measurement method. This method measures tilt angle of drilling machine using laser interferometer with simple sliding linear bearing. Measurement method is next orders. First, measurement position is considered pointed contact of two probes. And revolution of drill axis deliver pointed contact of probe. Second, so laser interferometer attach on sliding linear bearing, moving of probe influence laser reflector. And laser program displays this vibration of laser reflector. Namely, this vibration is tilt factor. A lot of error factor have an effect on accuracy to measurement of linear, angular, and so on. But this paper ignores some error factor, because these error festor is very smaller than tilt angle factor which we had been measuring values.