Surface treatment of feldspathic porcelain: scanning electron microscopy analysis

Elham Moravej-Salehi,Azam Valian 대한치과보철학회 2014 The Journal of Advanced Prosthodontics Vol.6 No.5

PURPOSE Topographic analysis of treated ceramics provides qualitative information regarding the surface texture affecting the micromechanical retention and locking of resin-ceramics. This study aims to compare the surface microstructure following different surface treatments of feldspathic porcelain. MATERIALS AND METHODS This in-vitro study was conducted on 72 porcelain discs randomly divided into 12 groups (n=6). In 9 groups, feldspathic surfaces were subjected to sandblasting at 2, 3 or 4 bar pressure for 5, 10 or 15 seconds with 50 µm alumina particles at a 5 mm distance. In group 10, 9.5% hydrofluoric acid (HF) gel was applied for 120 seconds. In group 11, specimens were sandblasted at 3 bar pressure for 10 seconds and then conditioned with HF. In group 12, specimens were first treated with HF and then sandblasted at 3 bar pressure for 10 seconds. All specimens were then evaluated under scanning electron microscopy (SEM) at different magnifications. RESULTS SEM images of HF treated specimens revealed deep porosities of variable sizes; whereas, the sandblasted surfaces were more homogenous and had sharper peaks. Increasing the pressure and duration of sandblasting increased the surface roughness. SEM images of the two combined techniques showed that in group 11 (sandblasted first), HF caused deeper porosities; whereas in group 12 (treated with HF first) sandblasting caused irregularities with less homogeneity. CONCLUSION All surface treatments increased the surface area and caused porous surfaces. In groups subjected to HF, the porosities were deeper than those in sandblasted only groups.

Aeroelastic stability analysis of a two-stage axially deploying telescopic wing with rigid-body motion effects

Sayed Hossein Moravej Barzani,Hossein Shahverdi Techno-Press 2023 Advances in aircraft and spacecraft science Vol.10 No.5

This paper presents the study of the effects of rigid-body motion simultaneously with the presence of the effects of temporal variation due to the existence of morphing speed on the aeroelastic stability of the two-stage telescopic wings, and hence this is the main novelty of this study. To this aim, Euler-Bernoulli beam theory is used to model the bending-torsional dynamics of the wing. The aerodynamic loads on the wing in an incompressible flow regime are determined by using Peters' unsteady aerodynamic model. The governing aeroelastic equations are discretized employing a finite element method based on the beam-rod model. The effects of rigid-body motion on the length-based stability of the wing are determined by checking the eigenvalues of system. The obtained results are compared with those available in the literature, and a good agreement is observed. Furthermore, the effects of different parameters of rigid-body such as the mass, radius of gyration, fuselage center of gravity distance from wing elastic axis on the aeroelastic stability are discussed. It is found that some parameters can cause unpredictable changes in the critical length and frequency. Also, paying attention to the fuselage parameters and how they affect stability is very important and will play a significant role in the design.

Surface treatment of feldspathic porcelain: scanning electron microscopy analysis

Valian, Azam,Moravej-Salehi, Elham The Korean Academy of Prosthodonitics 2014 The Journal of Advanced Prosthodontics Vol.6 No.5

PURPOSE. Topographic analysis of treated ceramics provides qualitative information regarding the surface texture affecting the micromechanical retention and locking of resin-ceramics. This study aims to compare the surface microstructure following different surface treatments of feldspathic porcelain. MATERIALS AND METHODS. This in-vitro study was conducted on 72 porcelain discs randomly divided into 12 groups (n=6). In 9 groups, feldspathic surfaces were subjected to sandblasting at 2, 3 or 4 bar pressure for 5, 10 or 15 seconds with $50{\mu}m$ alumina particles at a 5 mm distance. In group 10, 9.5% hydrofluoric acid (HF) gel was applied for 120 seconds. In group 11, specimens were sandblasted at 3 bar pressure for 10 seconds and then conditioned with HF. In group 12, specimens were first treated with HF and then sandblasted at 3 bar pressure for 10 seconds. All specimens were then evaluated under scanning electron microscopy (SEM) at different magnifications. RESULTS. SEM images of HF treated specimens revealed deep porosities of variable sizes; whereas, the sandblasted surfaces were more homogenous and had sharper peaks. Increasing the pressure and duration of sandblasting increased the surface roughness. SEM images of the two combined techniques showed that in group 11 (sandblasted first), HF caused deeper porosities; whereas in group 12 (treated with HF first) sandblasting caused irregularities with less homogeneity. CONCLUSION. All surface treatments increased the surface area and caused porous surfaces. In groups subjected to HF, the porosities were deeper than those in sandblasted only groups.

Effect of Galanin Infusion into the Third Ventricle on Plasma Concentrations of Metabolic Parameters in Goats Fed Diets of Different Energy Content

Khazali, H.,Towhidi, A.,Moravej, H.,Parhizkar, A. Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.6

The goal of this study was to determine whether galanin affects the mean plasma concentrations of metabolic parameters such as thyroxine (T4), triiodothyronine (T3), growth hormone (GH), insulin, glucagon, glucose, fatty acid and urea in goats fed diets differing in energy content. Sixteen goats were randomly divided into 4 groups. Animals in groups 1 and 2 were fed 100% and animals in groups 3 and 4 were fed 50% energy content in the diet for 20 days. After 20 days, animals in groups 1 and 3 received a daily infusion of $1{\mu}g$ galanin and groups 2 and 4 received a daily infusion of $2{\mu}g$ galanin into their third ventricle for 5 days. Blood samples were collected daily from the jugular vein before infusion on day 4 until 4 days after the last infusion of galanin. Samples were assayed for plasma T3, T4, GH, insulin and glucagon concentrations by double-antibody RIA. Glucose, fatty acid and urea concentrations were also measured. Lower dietary energy intake and infusions of 1 and $2{\mu}g$ galanin significantly (p<0.01) decreased the mean plasma concentrations of T3, T4, insulin and glucose and significantly (p<0.01) increased the mean plasma concentrations of GH, glucagon, fatty acid and urea of the animals in groups 3 and 4. Different dosages of the galanin infusions did not change the plasma concentrations of the metabolic parameters in the animals fed a normal dietary energy content. The results of this experiment indicated that galanin may negatively affect T3, T4, insulin and glucose and increase GH, glucagon, fatty acid and urea in goats with negative energy balance, but not in those with positive energy balance.

Evaluation of Coloring Potential of Dietzia natronolimnaea Biomass as Source of Canthaxanthin for Egg Yolk Pigmentation

Esfahani-Mashhour, M.,Moravej, H.,Mehrabani-Yeganeh, H.,Razavi, S.H. Asian Australasian Association of Animal Productio 2009 Animal Bioscience Vol.22 No.2

An experiment was conducted to evaluate the effect of different levels of extracted pigment from Dietzia natronolimnaea biomass as a source of canthaxanthin in comparison with synthetic canthaxanthin on egg yolk pigmentation. The experiment used a completely randomized design (CRD). A total of 63 laying hens, 68 weeks old, were used and the birds were allotted to 7 dietary treatments with each treatment replicated three times with three hens per replicate. Treatments consisted of 3 levels of synthetic canthaxanthin (4, 8 and 16 ppm), 3 levels of extracted pigment from D. natronolimnaea biomass (4, 8 and 16 ppm) and control. Changes in yolk color were determined in 2 eggs taken at random, during the four week experimental period from each replicate. Supplementation of extracted pigment from D. natronolimnaea biomass had a significant effect on the color of egg yolks (p<0.05). Yolk color score of the control group was 6.83 in BASF color fan and the yolk color score of different extracted pigment levels was 11.00, 12.50 and 14.50, respectively. The yolk colors of different levels of synthetic canthaxanthin were 12.00, 14.00 and 15.00, respectively. The effect of pigment supplementation on egg yolk color was better explained by polynomial response curves. The $R_{2}$ indicated that for 3 supplementation levels of each pigment studied, over 90% of the color variation could be explained by the pigment concentration. The egg yolk color after 15 and 30 days of storage was not significantly different, but boiling reduced egg yolk color significantly (p<0.05).

Effect of Gamma Irradiation on Anti Nutritional Factors and Nutritional Value of Canola Meal for Broiler Chickens

Gharaghani, Hossein,Zaghari, Mojtaba,Shahhosseini, Gholamreza,Moravej, Hossein Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.10

Two completely randomized block design experiments were conducted to evaluate the effect of gamma irradiation processing of canola meal on performance parameters of broiler chicks (Ross 308) and protein quality of canola meal. Protein efficiency ratio (PER) and net protein ratio (NPR) were measured as indices of canola meal protein quality. Samples of canola meal were tested for nutritional value after being irradiated at dose levels 10, 20 and 30 kGy. Glucosinolate content was reduced 40, 70 and 89 percent at irradiation dose levels of 10, 20 and 30 kGy respectively (p<0.01). Percent of erucic acid in total fatty acid content increased 44, 58 and 48% as a function of radiation dose (p<0.01). Dose levels did not affect feed conversion ratio (FCR) and body weight gain of chicks (p>0.05). Liver weight was decreased by irradiation dose (p<0.05). The same trend was observed for kidney weights, but this trend was not significant (p>0.05). Gamma irradiation processing of canola meal had no significant effect on $T_3$ level in blood of chickens that consumed canola meal, but $T_4$ level of chicken blood at the 30 kGy dose decreased significantly (p<0.05). PER and NPR were not affected by radiation dose level (p>0.05). Gamma irradiation seems to be a good procedure to improve the nutritional quality of canola meal.

Dynamic relaxation method for nonlinear buckling analysis of moderately thick FG cylindrical panels with various boundary conditions

M. E. Golmakani,M. N. Sadraee Far,M. Moravej 대한기계학회 2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.30 No.12

Using new approach proposed by Dynamic relaxation (DR) method, buckling analysis of moderately thick Functionally graded (FG) cylindrical panels subjected to axial compression is investigated for various boundary conditions. The mechanical properties of FG panel are assumed to vary continuously along the thickness direction by the simple rule of mixture and Mori-Tanaka model. The incremental form of nonlinear formulations are derived based on First-order shear deformation theory (FSDT) and large deflection von Karman equations. The DR method combined with the finite difference discretization technique is employed to solve the incremental form of equilibrium equations. The critical mechanical buckling load is determined based on compressive load-displacement curve by adding the incremental displacements in each load step to the displacements obtained from the previous ones. A detailed parametric study is carried out to investigate the influences of the boundary conditions, rule of mixture, grading index, radius-to-thickness ratio, length-to-radius ratio and panel angle on the mechanical buckling load. The results reveal that with increase of grading index the effect of radius-to-thickness ratio on the buckling load decreases. It is also observed that effect of distribution rules on the buckling load is dependent to the type of boundary conditions.

Warm Cupping of the Posterior Thorax in Combination with Standard Conventional Therapy for ARDS in COVID-19 Patients in ICU: a Case Series

Karimi Mehrdad,Kazemi Amir Hooman,Nareswari Irma,Zarei Azadeh,Zargaran Arman,Moravej Seyed Ali Al-hadi,Jazayeri Seyede Ferdos,Nabavian Omid,Ahmadi Seyedeh Aida,Alipour Reihane 사단법인약침학회 2022 Journal of Acupuncture & Meridian Studies Vol.15 No.3

Acute respiratory distress syndrome (ARDS) is commonly found in critically ill patients with coronavirus disease 2019 (COVID-19). As a non-pharmacological treatment of complementary and alternative medicine (CAM), cupping has been clinically used for respiratory symptoms. We sequentially identified a series of patients with COVID-19 with ARDS who were admitted to the intensive care unit (ICU). Warm cupping of the posterior thorax was performed for seven days. We collected longitudinal severity scores on cough, breathlessness, chest tightness, type of oxygen therapy, and oxygen saturation (SpO 2 ). We hereby report the changes in the severity scores in a series of eight patients who received 21 sessions of cupping in addition to conventional treatments. All patients reported improvement in symptom scores that was matched by an increase in SpO 2 by as much as 3.16%. All patients were discharged and did not require the use of a mechanical ventilator. The results suggest that combining cupping with conventional treatment may provide a good prognosis for patients with COVID-19 with ARDS.

Association of MicroRNA Polymorphisms With Hepatocellular Carcinoma in an Iranian Population

Zhaleh Farokhizadeh,Sahar Dehbidi, M.Sc,Bita Geramizadeh,Ramin Yaghobi,Seyed Ali Malekhosseini,Mehrdad Behmanesh,Mohammad Hossein Sanati,Afsoon Afshari,Ali Moravej,Mohammad Hossein Karimi 대한진단검사의학회 2019 Annals of Laboratory Medicine Vol.39 No.1

Background: Single nucleotide polymorphisms (SNPs) can modulate various biological processes by influencing microRNA (miRNA) biogenesis and altering target selection. Common SNPs may alter the processing of miRNA and may be associated with hepatocellular carcinoma (HCC). We investigated the relationship between miR-499A>G, miR-149C>T, miR-196a2T>C, and miR-146aG>C and HCC susceptibility, examining the interaction of the miRNAs with hepatitis B virus (HBV). Methods: We evaluated the associations of miR-499A>G (rs3746444), miR-149C>T (rs2292832), miR-196a2T>C (rs11614913), and miR-146aG>C (rs2910164) with HCC susceptibility in 100 HCC patients (70 males and 30 females) and 120 healthy controls (70 males and 50 females), using the PCR-restriction fragment length polymorphism method. Results: For miR-499A>G, the frequencies of the AG genotype and G allele were higher in female HCC patients than in female controls (P=0.02 and 0.045, respectively). The frequency of the A allele was higher in HBV-positive HCC patients than in controls (P=0.019). For miR-149C>T, the frequency of the CC genotype was higher in female HCC patients than in female controls (P=0.009). For miR-196a2T>C, the frequencies of the CT and CC genotypes and the C allele were higher in HBV-positive HCC patients than in controls (P<0.001, P=0.009, and P<0.001, respectively). The frequencies of miR-146aG>C polymorphisms did not differ between HCC patients and controls. Conclusions: miR-499A>G, miR-149C>T, and miR-196a2T>C were associated with the development of HCC in women and/or that of HBV-related HCC. They can be considered genetic risk factors for the development of HCC among Iranians.