http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박균영 ( Kyun Young Park ),이미선 ( Mi Sun Lee ),김민철 ( Min Cheol Kim ),이찬희 ( Chan Hee Lee ),박회경 ( Hoey Kyung Park ),강태원 ( Tae Won Kang ),정해성 ( Hae Seong Jeong ),한경아 ( Kyoung Ah Han ),허원회 ( Weon Hoe Huh ),유지 한국화학공학회 2013 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.51 No.3
직경 25 mm의 파이렉스 튜브 내에서 실리콘의 유동층 염소화 반응이 수행되었다. 반응기에 공급되는 질소 유량0.8~1.0 L/min, 염소 유량 0.2 L/min, 반응온도 450℃, SiCl4 응축기의 냉매온도는 -5℃로 설정하였다. 반응기에 도입되는 가스 내 염소의 몰분율이 증가하면 SiCl4의 수율이 증가하였다. 반응가스 중 염소의 몰분율 0.2의 조건에서 SiCl4의 수율은 28% 이었다. 염소의 몰분율 증가는 반응열 상승에 의해 반응온도 상승을 가져옴으로써 안전을 고려하여 염소의 몰분율을 0.2 이상으로 올리지 못했다. 실리콘의 유동층 염소화 반응에 의한 사염화실리콘의 제조 가능성이 입증되 었으며, 향후 보다 가혹한 조건에서의 실용화 연구를 위한 기초로 활용될 수 있을 것으로 기대된다. The chlorination of a metallurgical-grade silicon was carried out in a fluidized bed reactor, 25 mm in diameter. The flow rate of the chlorine admitted into the reactor was 0.2 L/min and that of the carrier nitrogen was 0.8~1.0 L/ min. The reactor temperature was maintained at 450℃ and the temperature of the coolant at the SiCl4 condenser was at -5℃. The SiCl4 yield increased with increasing the mole fraction of chlorine in the feed gas, exhibiting 28% at the mole fraction of 0.2. Further increase of the chlorine mole fraction was not attempted in a worry that the reactor might be failed due to the high exothermicity of the reaction. The production of SiCl4 from silicon by fluidized bed chlorination was demonstrated on a laboratory scale, which is a stepping stone for future studies under more severe conditions toward industrial application.
단면 CT 영상을 이용한 무치악 하악 대구치부 잔존골의 형태 분석
이설미,허경회,이원진,허민석,이삼선,강태인,최순철 대한구강악안면방사선학회 2007 Imaging Science in Dentistry Vol.37 No.3
Purpose : The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods : Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results : Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (P<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion : More care should be taken when an implant is installed on the mandibular second molar area.
구강외과 수술용 스텐트 기반 영상유도 수술 시스템의 개발
이우진,김대승,이원진,이삼선,최순철,허민석,허경회,김명진,이지호 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.3
Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Threedimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of 0.56±0.16 mm. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites. (Korean J Oral Maxillofac Radiol 2009; 39 : 149-56)
돼지 하악골의 micro-CT 영상에서 추출한 3차원 골미세구조와 골강도 사이의 상관관계
허경회,박무순,이원진,허민석,이삼선,최순철 대한구강악안면방사선학회 2005 Imaging Science in Dentistry Vol.35 No.3
Purpose : To investigate the relationship between three-dimensional (3D) bone imaging parameters and trabecular strength in the mandible. Materials and Methods : Bone specimens were obtained from the mandibles of five male pigs weighing around 110 kg each. Of those, 43 samples were selected for 3D analysis and measured by micro-computed tomography. The five morphometric parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DA). Through destructive mechanical testing, strength parameters were obtained. Results : BV/TV, SMI, BS/BV, and Tb.Th showed significant correlations with strength parameters. DA did not show any correlation with the other parameters. In multiple linear regression analysis, BV/TV alone explained 43% of the variance in Young’s modulus. By stepwise inclusion of SMI, the variance in the Young’s modulus was better explained up to 52%. Conclusions : Predicting trabecular strength in the mandible through architectural analysis would be possible. Further study is needed to establish the tendency and variety of trabecular architecture and strength according to the locations within the mandible.
구민희,이찬원,문성원 경남대학교 환경문제연구소 2002 환경연구 Vol.25 No.-
A cleansing wastewater which comes from operating water-purifying machine is classified as a strong alkaline wastewater. When this alkaline wastewater was directly applied to the neutralization of acidic wastewater, there were several problems such as increasing the coagulant amount, reaction time, and floating of sludge in the neutralizing tank. Thus, the goal of this study is to fix the problems in utilizing the alkaline wastewater as a neutralizing agent by introducing a new method to the first pre-treatment process. A cleansing wastewater was characterized by pH 12.3, COD 28mg/L, and SS 25mg/L. Without any treatment, there would be some difficulties in treating in the following physicochemical sewage treatment facilities. When seawater or bittern was added to the alkaline wastewater, the solids were coprecipitated with Mg(OH)₂. Use of alkaline wastewater after removing some contaminants and color made it possible to treat wastewater effectively and economically in the next step of wastewater treatment.
돼지 하악 과두의 해면골에서 유한요소분석법으로 예측한 방향에 따른 탄성율과 3차원 골 미세지표 간의 상관관계
박관수,이삼선,허경회,이원진,허민석,최순철 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.2
Purpose : To investigate the relationship between 3D bone architectural parameters and direction-related elastic moduli of cancellous bone of mandibular condyle. Materials and Methods : Two micro-pigs (Micro-pig^(R), PWG Genetics Korea) were used. Each pig was about 12 months old and weighing around 44 kg. 31 cylindrical bone specimen were obtained from cancellous bone of condyles for 3D analysis and measured by micro-computed tomography. Six parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI), degree of anisotropy (DA) and 3-dimensional fractal dimension (3DFD). Elastic moduli of three orthogonal directions (superiorinferior (SI), medial-lateral (ML), andterior-posterior (AP) direction) were calculated through finite element analysis. Results : Elastic modulus of superior-inferior direction was higher than those of other directions. Elastic moduli of 3 orthogonal directions showed different correlation with 3D architectural parameters. Elastic moduli of SI and ML directions showed significant strong to moderate correlation with BV/TV, SMI and 3DFD. Conclusion : Elastic modulus of cancellous bone of pig mandibular condyle was highest in the SI direction and it was supposed that the change into plate-like structure of trabeculae was mainly affected by increase of trabeculae of SI and ML directions.