http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Truong Giang Nguyen,Thanh Khiem Nguyen,Ham Hoi Nguyen,Hong Son Trinh,Tuan Hiep Luong,Minh Trong Nguyen,Van Duy Le,Hai Dang Do,Kieu Hung Nguyen,Van Minh Do,Quang Huy Tran,Cuong Thinh Nguyen 한국간담췌외과학회 2024 Annals of hepato-biliary-pancreatic surgery Vol.28 No.1
Backgrounds/Aims: Parenchymal-sparing anatomical hepatectomy (Ps–AH) based on portal ramification of the right anterior section (RAS) is a new technique to avoid unnecessarily transecting too much liver parenchyma, especially in cases of major anatomical hepatectomy. Methods: We prospectively assessed 26 patients with primary hepatic malignancies having undergone major Ps–AH based on portal ramification of the RAS from August 2018 to August 2022 (48 months). The perioperative indications, clinical data, intra-operative index, pathological postoperative specimens, postoperative complications, and follow-up results were retrospectively evaluated. Results: Among the 26 patients analyzed, there was just one case that had intrahepatic cholangiocarcinoma The preoperative level of α– Fetoprotein was 25.2 ng/mL. All cases (100%) had Child–Pugh A liver function preoperatively. The ventral/dorsal RAS was preserved in 19 and 7 patients, respectively. The mean surgical margin was 6.2 mm. The mean surgical time was 228.5 minutes, while the mean blood loss was 255 mL. In pathology, 5 cases (19.2%) had microvascular invasion, and in the group of HCC patients, 92% of all cases had moderate or poor tumor differentiation. Six cases (23.1%) of postoperative complications were graded over III according to the Clavien–Dindo system, including in three patients resistant ascites or intra-abdominal abscess that required intervention. Conclusions: Parenchymal-sparing anatomical hepatectomy based on portal ramification of the RAS to achieve R0-resection was safe and effective, with favorable short-term outcomes. This technique can be used widely in clinical practice.
High-Resolution Simulations for Vietnam - Methodology and Evaluation of Current Climate
Jack Katzfey,Kim Nguyen,John McGregor,Peter Hoffmann,Suppiah Ramasamy,Hiep Van Nguyen,Mai Van Khiem,Thang Van Nguyen,Kien Ba Truong,Thang Van Vu,Hien Thuan Nguyen,Tran Thuc,Doan Ha Phong,Bang Thanh Ng 한국기상학회 2016 Asia-Pacific Journal of Atmospheric Sciences Vol.52 No.2
To assist the government of Vietnam in its efforts to better understand the impacts of climate change and prioritise its adaptation measures, dynamically downscaled climate change projections were produced across Vietnam. Two Regional Climate Models (RCMs) were used: CSIRO’s variable-resolution Conformal-Cubic Atmospheric Model (CCAM) and the limited-area model Regional Climate Model system version 4.2 (RegCM4.2). First, global CCAM simulations were completed using bias- and variance-corrected sea surface temperatures as well as sea ice concentrations from six Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models. This approach is different from other downscaling approaches as it does not use any atmospheric fields from the GCMs. The global CCAM simulations were then further downscaled to 10 km using CCAM and to 20 km using RegCM4.2. Evaluations of temperature and precipitation for the current climate (1980-2000) were completed using station data as well as various gridded observational datasets. The RCMs were able to reproduce reasonably well most of the important characteristics of observed spatial patterns and annual cycles of temperature. Average and minimum temperatures were well simulated (biases generally less than 1oC), while maximum temperatures had biases of around 1oC. For precipitation, although the RCMs captured the annual cycle, RegCM4.2 was too dry in Oct.-Nov. (−60% bias), while CCAM was too wet in Dec.- Mar. (130% bias). Both models were too dry in summer and too wet in winter (especially in northern Vietnam). The ability of the ensemble simulations to capture current climate increases confidence in the simulations of future climate.
Van Hiep Nguyen,김영호 한국공업화학회 2018 공업화학 Vol.29 No.6
리튬 이온 배터리는 휴대용 전자 제품, 전기 자동차 및 그리드 규모의 에너지 저장 장치 등과 같이 일상 생활에서다양한 용도로 널리 사용되고 있다. 최근 높은 에너지 밀도, 경량 및 저비용과 같은 상업적 요구를 만족하는 리튬이온 배터리 전극 소재 개발을 위하여 상당한 노력이 진행되어 오고 있다. 이 총설에서는 리튬 이온 배터리 양극 및음극 재료의 원리와 최근 연구 동향을 요약하였으며, 특히 전극 소재의 설계 및 고급 특성화 기술을 강조하였다.
Nguyen Van Hiep,Ngo Minh Duc,김영호 한국탄소학회 2020 Carbon Letters Vol.30 No.6
In this study, soybean oil, which is used in a large variety of processed foods, is used as a carbon source. Soybean oil is successfully coated onto the surface of LiNi1/3Co1/3Mn1/3O2 (NCM) by a simple method. The physical and electrochemical properties of NCM/C hybrid materials are determined. As a result, a 5 nm thickness carbon coating layer is formed on the surface of the NCM, resulting in improved capability and cyclic performance in the battery. The NCM/C battery shows an initial discharge capacity of 159 mAh g−1 and 95% capacity retention after 100 cycles (a discharge capacity of 120 mAh g−1 and 94% retention are observed after 100 cycles for the NCM cathode).
Hiep, Nguyen Van,Wang, Wan Lin,Jin, En Mei,Gu, Hal-Bon 한국신재생에너지학회 2011 한국신재생에너지학회 학술대회논문집 Vol.2011 No.11
Poly (sodium 4-styrenesulfonate) (PSS) is ionomer based on polystyrene that is electrical conductivity and isoviscosity. LiFePO4 has been a promising electrode material however its poor conductivity limits practical application. To enhance the electronic conductivity of LiFePO4, in this study we prepared LiFePO4- PSS composite by the hydrothermal method. LiFePO4 was heated at 170?C for 12h and then different wt% PSS (0%, 2.91%, 4.75%, 7.36%, 10%) are added to LiFePO4 and milled at 300rpm for 10h. And then the obtained powders were subsequently heated at 500?C for 1h under argon flow. The cathode electrode were made from mixtures of LiFePO4-PSS: SP-270- PVDF in a weighting ratio 75%: 25%:5%. The electrochemical properties of LiFePO4- PSS/Li batteries were analyzed by cyclic voltammetry and charge/discharge tests. LiFePO4-C/Li battery with 4.75 wt% PSS displays discharge capacity of 128 mAh g-1 at room temperature that is considerably higher than pure LiFePO4/Li battery ( 113.48 mAhg-1).
Hiep Van Nguyen,김은미,구할본 한국전기전자재료학회 2012 Transactions on Electrical and Electronic Material Vol.13 No.4
In this study, we prepared LiFePO4- poly (sodium 4-styrenesulfonate) (PSS) composite by the hydrothermal method and ball-milling process. Different wt% PSS were added to LiFePO4. The cathode electrodes were made from mixtures of LiFePO4-PSS: SP-270: PVDF in a weighting ratio of 70%: 25%: 5%. LiFePO4-PSS powders were characterized by X-ray diffraction (XRD), and scanning electron microscopy (SEM). The electrochemical properties of LiFePO4-PSS/Li batteries were analyzed by cyclic voltammetry, charge/discharge tests, and AC impedance spectroscopy. A Li/LiFePO4-PSS battery with 4.75 wt% PSS shows the best electrochemical properties, with a discharge capacity of 128 mAh/g.
Nguyen Trung Dung,Nguyen Van Hiep,Manh B. Nguyen,Vu Dinh Thao,Nguyen Nhat Huy 한국화학공학회 2021 Korean Journal of Chemical Engineering Vol.38 No.10
Photocatalysis is usually considered as one of the most effective methods for treating non-biodegradable pollutants commonly found in textile wastewater. In this study, the photocatalyst of g-C3N4/MIL-53(Fe) was synthesized by the hydrothermal method and applied for the removal of Rhodamine B (RhB) in water. The photocatalytic material was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller analysis, UV-Vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The results showed that the g-C3N4 doped MIL-53(Fe) with 97 wt% of MIL- 53(Fe) works effectively under visible light and the presence of oxidants (Na2S2O8). RhB removal efficiency can be more than 99% with 20mg/L of RhB, 300mg/L of catalyst, 200mg/L of Na2S2O8, and pH 3. In addition, the photocatalytic degradation mechanism of RhB with g-C3N4/MIL-53(Fe) was also proposed, which could be improved and studied for a wide range of applications in textile wastewater treatment.