http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한유수(Han Yoo Soo),송하룡(Song Ha Ryong),이인수(Lee In Soo) 한국산업정보학회 2017 한국산업정보학회논문지 Vol.22 No.5
인공위성 발사를 위한 우주발사체는 효율적인 비행을 위하여 다단으로 구성이 되며 단분리, 연료점화 및 연소종료 등의 비행이벤트를 거쳐서 임무를 완수하게 된다. 이 과정에서 발사체는 추력이 발생하는 동력비행구간과 추력이 없는 탄도비행구간의 과정을 반복하여 겪게 된다. 이러한 우주발사체의 비행특성을 하나의 동력학 모델로 표현하기는 어렵기 때문에 다중모델을 사용하는 추적 알고리즘에 대한 연구가 많이 진행되어 왔다. 다중모델 추적 알고리즘을 사용하는 경우에는 추적 성능의 개선을 기대할 수 있지만, 사용할 각 동력학 모델들을 적절히 선정해야 하는 어려움이 있으며 또한 다중모델 사용으로 인해 계산양이 증가하는 단점이 있다. 본 논문에서는 등가속도 모델과 적응형 Singer 모델을 사용하는 두 개의 칼만필터만으로 다양한 비행특성을 가지는 우주발사체를 효과적으로 추적하는 방법을 제안한다. A Space Launch Vehicle (SLV) for Launching Satellites Consists of Multi-stage Rockets for the Purpose of Efficient Flight and Accomplishes the Launch Mission through Flight Events such as Stage Separation, Engine Start and Stop. In this Process, the SLV is Supposed to Undergo the Processes of the Powered Flight Section in which the Engine Generates Thrust and the Ballistic Flight Section in which there is no Thrust Repeatedly. Because it is Difficult to Express these Flight Characteristics of the SLV as a Single Dynamics Model, much Research on Tracking Algorithms using Multiple Models has been Undertaken. In case of using the Multiple Model Tracking Algorithm, it is Expected to Improve the Tracking Performance of the SLV. However, it is Difficult to Select Proper Dynamics Models to be used and the Calculation Amount Increases due to the use of Multiple Models. In this Paper, we Propose a Method to Track the SLV with Diverse Flight Characteristics Efficiently by only Two Kalman Filters using Constant Acceleration Model and Adaptive Singer Model.
Up and Down법을 이용한 목재와 목질재료의 연소시험
한유수(Phil-Woo Lee),이필우(Young-Ki Yun),윤영기(Yu-Soo Han) 한국가구학회 1991 한국가구학회지 Vol.2 No.1
To investigate relative flammability in flaming combution among 15 softwoods, 24 hardwoods, 5 tropical woods and 3 wood-based materials, oxygen indices were determined through Up and Down method following oxygen index test of ASTM D 2863-77.<br/> Oxygen index ranged from 27.6 for Quecus aculissima to 20.7 for Poplus davidiana in hardwoods, from 28.2 for Larix gmelim var. rincipis-ruprechti to 21.0 for Pinus strobus in softwoods and from 27.3 for Diplerocapus grandiflorus to 22.3 for Alhizia falcalaria in tropical woods.<br/> Judging from the fact that highly flammable materials are likely to have a low oxygen index, Quercus acutissima in hardwoods, Larix gmelini var. rincipis-ruprechlii in softwoods and Diplerocarpus grandiflorus in tropical woods appear to be ranked first inflammability but poplus davidiana in hardwoods, Pinus strobus in softwoods and Albizia falcalaria in tropical woods appear to be the least in fire resistance. Particleboard have higher oxygen index than that of other wood-based materials and a lot of wood species.
FTIR 분자구조 해석을 통한 에폭시-실리카 나노복합소재의 열기계적 물성 연구
장서현,한유수,황도순,정주원,김영국,Jang, SeoHyun,Han, Yusu,Hwang, DoSoon,Jung, Juwon,Kim, YeongKook 한국마이크로전자및패키징학회 2021 마이크로전자 및 패키징학회지 Vol.28 No.2
이 연구에서는 에폭시 수지에 포함된 나노 실리카 입자의 농도가 재료의 열/기계적 물성에 미치는 영향에 대해 알아보았다. 약 12 nm 크기의 나노 입자를 에폭시 수지에 다섯가지 무게비로 섞은 나노복합소재를 제작하였다. DMA와 TMA 방법을 이용하여 유리전이온도, 응력이완, 열팽창 거동을 측정하였다. 이를 통해 나노입자가 재료의 점탄성 거동에 어떠한 영향을 미치는지 보였다. 실리카 입자의 함량이 증가할수록 순수 에폭시 재료 대비 탄성 물성은 증가하였고, 유리전이온도는 감소하였다. FTIR 결과는 분자구조의 관점에서 충진제 함량에 따른 물성변화의 원인을 찾고 나노입자가 에폭시 분자 구조에 어떠한 영향을 미치는지를 규명하는데 중요한 역할을 하였다. This paper analyzed the effects of the concentration of nano-silica particles contained in epoxy resin on the thermomechanical properties of the composite materials. The 12nm sized nanoparticles were mixed with epoxy polymer by 5 different weight ratios for the test samples. The glass transition temperature, stress relaxation, and thermal expansion behaviors were measured using dymanic mechanical analyzer (DMA) and thermomechanical analyzer (TMA). It was shown that the nano particle mixing ratios had significant influences on the viscoelastic behaviors of the materials. As the content of the silica particles was increased, the elastic modulus was also increased, while the glass transition temperatures were decreased. Fourier Transform Infrared Spectroscopy (FTIR) results played an important role in determining the causes of the property changes by the filler contents in terms of the molecular structures, enabling the interpretations on the material behaviors based on the chemical structure changes.
저궤도 우주환경에서 에폭시-실리카 나노 복합소재의 열화거동 분석
장서현(Seo-Hyun Jang),한유수(Yusu Han),황도순(Do Soon Hwang),정주원(Joo Won Jung),김영국(Yeong Kook Kim) 한국항공우주학회 2020 韓國航空宇宙學會誌 Vol.48 No.12
이 연구에서는 저궤도 우주 환경(LEO) 조건에서 나노실리카 에폭시 복합소재의 실리카 농도가 재료의 열화 거동에 미치는 영향에 대해 알아보았다. 실리카 입자를 에폭시 수지에 10%와 18% 두 가지 서로 다른 무게비로 나노복합소재를 제작하여 저궤도 우주 환경 모사장치에서 열화시켰다. 열화된 나노복합소재를 대상으로 열중량분석(Thermogravimetric Analysis, TGA)를 수행하였고 등변환법(Iso-conversional Method)에 기반한 Friedman 방법, Flynn-Wall-Ozawa(FWO) 방법, Kissinger 방법, 그리고 DAEM(Distributed Activation Energy Method)으로 활성화에너지를 계산하였다. 그 결과 나노입자가 섞이지 않은 샘플은 열화가 진행되면서 중가함을 보였다. 그러나 10%와 18%는 열화싸이클이 15회일 때까지 증가하였으나 그 이후에는 감소하였으며, 따라서 나노 입자가 열화 거동에 부정적인 영향이 있음을 보였다. 또한 활성화에너지 계산에 적용된 방법에 대해 토의하였다. In this study, the effects of Low Earth Orbit(LEO) environments on the degradation behavior of epoxy nano silica composite materials were investigated. The nanocomposite materials containing silica particles in different weight ratios of 10% and 18% were prepared and degraded in a LEO simulator to compare with the neat epoxy cases. Thermogravimetric analysis (TGA) was performed on the degraded nanocomposites and the activation energies were calculated by Friedman method, Flynn-Wall-Ozawa (FWO) method, Kissinger method, and DAEM (Distributed Activation Energy Method) based on the iso-conversional method. As the results, for the neat epoxy sample cases, it was found that the average activation energy was increased as the degradation was progressed. When the nano particles were mixed, however, the energy increased to the 15 environmental test cycles, and decreased afterwards, meaning that the particle mixture contributed adversely to the thermal degradation. Discussions on the results of the different calculation methods were also given.