http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Li₂O의 삼출이 없는 LiNbO₃ 광도파로의 제조방법
김상혁(Kim Sang Hyuck),김상국(Kim Sang Kuk),조재철(Jo Jae Cheol),최상삼(Choi Sang Sam) 한국광학회 1991 한국광학회지 Vol.2 No.3
리튬나이오베이트 결정에 Ti를 열확산시켜 광도파로를 만드는 방법에서 문제가 되는 out-diffusion(삼출) 문제를 해결하는 방안으로 확산과정 이전에 SiO₂ 박막을 시료 위에 입히고 Ti을 열확산시켜 광도파로를 제조하는 방법을 제안하였으며, 기존의 방법에 의해서 만들어진 광도파로와 본 연구의 방법에 의해서 만든 광도파로의 근시야상(mear field pattern)을 비교하였다. We report a new method of fabricating a Ti:LiNbO₃ waveguide with no out-diffusion by coating the waveguide with SiO₂ thin film. It was coated before diffusion process, and the Li₂O out-diffusion was prevented in the diffusion process. We compare the near field patterns of the guided modes between the typical waveguide and the waveguide fabricated by new method proposed here.
김동환,주홍,최상삼,Kim, Dong-Hwan,Chu, Hong,Choi, Sang-Sam 한국광학회 1992 한국광학회지 Vol.3 No.2
엑시머 레이저나 TEA $Co_2$ 레이저로응용되는 균일 방전을 위한 전극 형상 설계에 중됴한 k 값과 전극의 크기에 고려되는 최소 허용 전기장의 위치와의 관계를 Chnag 형상과 Ernst 형상에 대해 각각 계산, 비교하였다. 이 결과는 전극 형상 설계에 있어서 초기 k 값 설정에 도움표를 제공한다. 전극 표면에서 각각의 전기장 세기를 비교하여 Ernst 형상이 Chang형상보다 2배내지 3배 정도로 균일 전기장 분포가 넓게 설계될 수 있음을 보였다. Calculation and comparison of the design parameter between Chang and Ernst profile that can be used for the uniform discharge in excimer or TEA $Co_2$ laser are carried out. This result can be used to establish the initial $\kappa$-value in the design of electron. Also, calculation shows that Ernst profile is 2-3 times superior to Chang profile in uniformity of electric field with respect to the same k-value ($0.001\le\kappa\le0.25$).
장주기 격자를 이용한 광섬유 레이저센서의 파장변화 측정
송민호,이상배,최상삼,남희,이병호,Song, Min-Ho,Lee, Sang-Bae,Choi, Sang-Sam,Nam, Hui,Lee, Byoung-Ho 대한전자공학회 1997 電子工學會論文誌, D Vol.d34 No.12
We present a fiber laser sensor that uses a fiber grating as a strain sensor head and an end-reflector of the laser cavity. A passive wavelength. The long-period grating band-rejection filter showed a wide usable filter wavelength range of about 25 nm, and the intensity of transmitted light increased by 16% for 1nm sensor wavelength shift in trhe measurement range.
압전 소자형 광섬유 격자 소자를 이용한 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치
김세윤,이상배,최상삼,정준,정지채,Kim, Se-Yoon,lee, Sang-Bae,Choi, Sang-Sam,Chung, Joon,Jeong, Ji-Chai 한국광학회 1997 한국광학회지 Vol.8 No.4
기존의 광섬유 격자 소자를 이용한 광 분기/결합 장치들이 광섬유 격자 소자의 브래그 파장에 해당하는 신호만을 선택할 수 있었던 단점을 극복하기 위해 압전 소자에 광섬유 격자 소자를 부착한 압전 소자형 광섬유 격자 소자를 제작하고, 이러한 압전소자형 광섬유 격자 소자와 편광 선속분할기를 이용하여 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치를 제안하고 실험하였다. 본 장치는 두 빛의 편광 상태를 이용하여 광섬유 격자 소자에 해당하는 파장의 신호를 분기/결합하는 장치로서 외부의 온도 변화에 크게 영향을 받지 않는 안정적인 특성을 보였다. 압전 소자에 전압을 인가함으로써 광섬유 격자 소자의 브래그 파장에 해당되는 신호(1549.3 nm)뿐만 아니라 가변된 파장(1550.1 nm)의 신호도 분기/결합할 수 있었다. 파장을 가변하지 않을 경우와 파장을 가변했을 경우 모두 광섬유 격자 소자에 의해 분기된 신호와 인접 채널 신호간의 차이 -26 dB 이하였으며 분기된 신호 중 광섬유 격자 소자를 통해 나오는 누설 신호는 -34 dB였다. We proposed and demonstrated a tunable wavelength optical add/drop multiplexer(OADM) employing piezoactuated fiber grating pairs and polarization beam splitters. We used piezostack act as a fiber stretcher, using the fact that the resonant wavelength of the grating can be controlled by the axial strain along the fiber grating. The polarization controlled configuration showed high stability because the reflected signals from the two identical gratings are dropped or added not by interference but by polarizations of the beams. We could add and drop not noly 1549.3nm signal channel(original gratings), but also 1550.1nm(tuned gratings) with PZT actuators and in both cases, we found that the rejection of adjacent channels was more than -26dB, and signal leakage at the gratings was less than -34dB.
광섬유 격자 소자를 이용한 WDM 시스템용 전광 분기 결합 장치의 구조 연구
김세윤,이상배,최상삼,정준,김상용,박일종,정지채,Kim, Se-Yoon,Lee, Sang-Bae,Choi, Sang-Sam,Chung, Joon,Kim, Sang-Yong,Park, Il-Jong,Jeong, Ji-Chai 대한전자공학회 1997 電子工學會論文誌, D Vol.d34 No.4
We demonstrate a novel wavelength -division add/drop multiplexer employing fiber bragg gratings and polarization beam splitters. the multiplexer is easy to fbricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5Gbps-per-channel WDM transmission system. We find that the rejection of adjacent channels is more than -6dB, and the signal leakage through output port is less than -34dB.
윤홍,조규만,이상배,김상혁,최상삼,Yoon, Hong,Cho, Kyu-Man,Lee, Sang-Bae,Kim, Sang-Hyuk,Choi, Sang-Sam 한국광학회 2000 한국광학회지 Vol.11 No.6
본 논문에서는 광섬유 브래그 격자를 공진기로 사용하는 파장 가변 광섬유 DFB레이저를 구현하였다 사용된 광섬유 브래그 격자는 3cm의 $Er^{3+}$ 첨가 광섬유에 새겨졌고 브래그 공명파장은 1559.4nm이다 단일모드 동작과 낮은 문턱 펌프를 위해 UV재조사 방법을 통하여 $\lambda/4$ 위상천이를 주었다. 제작된 레이저는 $230\muW$ 파워의 단일 모드 발진을 하며 35kHz의 선폭을 갖는다. 또한 광섬유 격자를 PZT로 조절하는 광섬유 인장기로 인장하여 레이저의 발진파장을 3nm까지 가변할 수 있었다. A study of the tunable fiber DFB laser using PZT-stretcher is presented. The device has an laser ocsillator by using a fiber Bragg grating at 1559.4 nm written directly into a 3-cm long $Er^{3+}$ doped fiber. Post UV-exposure method to provide the necessary phase shift is used for a single mode operation. The device shows the single mode operation of $230\muW$ output power and has a narrow linewidth of 35 kHz. The lasing wavelength of the laser can be tuned in a range of 3 nm by stretching the grating.rating.
Off-Axis RF Magnetron Sputtering 방법에 의한 $Ba_{0.5}Sr_{0.5}TiO_3$ 박막의 제조
신진,한택상,김영환,이재준,박순자,오명환,최상삼,Shin, Jin,Hahn, Taek-Sang,Kim, Young-Hwan,Lee, Jae-Jun,Park, Soon-Ja,Oh, Myung-Hwan,Choi, Sang-Sam 한국세라믹학회 1994 한국세라믹학회지 Vol.31 No.12
We have prepared Ba0.5Sr0.5TiO3 thin films on Si substrate without buffer layer. Deposition was carried out by off-axis rf magnetron sputtering method using Ba0.5Sr0.5TiO3 stoichiometric target. The substrate temperature was changed from 40$0^{\circ}C$ to $700^{\circ}C$ during deposition. As the substrate temperature increased, relative intensity of (110) peak increased up to $600^{\circ}C$, however preferred orientation changed from (110) to (h00) beyond $650^{\circ}C$ of substrate temperature. Deposited films showed microstructures with fine grains whose diameters are less than 100 nm, and columnar structure was observed in the cross-sectional SEM micrograph. AES depth profile showed no significant diffusion at the interfacial reaction area. The effective dielectric constant of films showed maximum value at $600^{\circ}C$, and the leakage current increased with increasing substrate temperature, which may be ascribed to the crystallization of amorphous phases at grain boundary.