http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주진규,김신은,이군재,김선국,이성호,Joo, Jin-Kyu,Kim, Shin-Eun,Lee, Gun-Jea,Kim, Sun-Kuk,Lee, Sung-Ho 한국건설관리학회 2012 한국건설관리학회 논문집 Vol.13 No.3
국내 공동주택의 리모델링 수월성 및 이에 따른 장수명화를 위해 그린 프레임 공법이 개발되었다. 그린 프레임 공법은 합성 프리캐스트 콘크리트 부재를 이용한 라멘구조로 벽식 구조와는 달리 양중 및 설치가 골조공사의 주공정으로 작용한다. 따라서 그린 프레임에 의한 적정 골조공사 공기 산정을 위해서는 체계적인 양중계획이 필요하다. 그러나 양중계획은 그린 프레임을 구성하는 요소인 합성 PC 부재(기둥, 보)의 단위 양중공정에 대한 분석이 선행되어야 한다. 따라서 본 연구는 그린 프레임 합성 PC 부재의 양중공정을 분석하는 것을 목적으로 한다. 이를 위해 합성 PC 기둥과 보의 양중절차와 시간을 도출하고, 그 결과를 사례 프로젝트에 적용하여 기준층의 양중 사이클을 분석한다. 본 연구의 결과는 향후 그린 프레임에 의한 골조공사 양중계획 시 핵심자료로 사용된다. Green frame technology intended to facilitate the remodeling of apartment housing complexes in Korea and extend their service life has been developed. Green frame design is a Rahmen structure using composite precast concrete members and, unlike a bearing-wall structure, lifting and installing structural members accounts for major steps of structural construction. Therefore, if green frame structure construction is to be scheduled appropriately, systematic lifting plan needs to be developed in advance. Development of lifting plan also requires unit lifting process of composite PC members (columns and beams) that consist of green frame to be analyzed first. Therefore, this study attempts to analyze the lifting process of composite PC members used in green frame structure. To that end, lifting procedure and time of composite PC column and beam are estimated and applied to a project case to analyze the lifting cycle of reference floor. Outcomes produced herein will be used as key data for development of lifting plan in subsequent green frame structure construction.
주진규(Joo Jin-Kyu),김태희(Kim Tae-Hui),김선국(Kim Sun-Kuk) 대한건축학회 2003 大韓建築學會論文集 : 構造系 Vol.19 No.12
Reinforcement work takes charge of approximately one-third of the reinforced concrete work that covers more than 30% of total construction cost and depends on labor intensive production. Despite, therefore, the comprehensive improvement of working process should be followed, it is confirmed through the survey of previous research that the research of work model considering working process and motion of rebar workers has not been carried out. The purpose of this paper is to build a work model of efficient rebar work process through the productivity analysis by work sampling and simulation.<br/> The model proposed in this research would be used for not only reducing non-productive activities but also providing the clues of productive rebar work, and eventually give the opportunity of cost reduction.
건설현장 화재 발생 요인 분석에 따른 예방우선순위 연구
김희수,장상철,주진규,Kim, Hee-su,Jang, Sang-chul,Joo, Jin-gyu 한국건설안전학회 2019 한국건설안전학회 논문집 Vol.2 No.2
현재 국내 건설현장에서 안전관리가 중요해지고 있다. 안전관리가 중요함에도 건설현장의 사고는 꾸준히 늘어나고 있는 실정이다. 안전사고 중에 화재사고는 건설현장의 공기지연이나 작업 계획에 부정적인 영향뿐만 아니라 크나큰 인명피해까지 야기한다. 따라서 이번 연구의 목적은 건설현장 화재발생사례를 통해 건설현장 화재발생 요인을 추출하고, 요인 분석을 통해서 예방우선순위를 정하여 화재예방에 기여하려는 것이다. 연구 방법으로는 사례를 통한 화재요인을 선정하고, 전문가 집단을 통해 설문조사를 실시 후 AHP기법을 통해 설문을 분석한다. 전문가 집단의 설문조사를 AHP기법으로 분석한 결과는 작업자와 작업자의 하위 항목들이 상위항목들을 차지하였다. 따라서 화재예방을 위한 우선순위를 제시하였으며, 본 연구를 통해 도출된 순위별 요인들을 우선순위에 따라 통제, 관리, 활용한다면 보다 효과적인 화제예방을 이룰 수 있을 것이라 사료된다. Currently, safety management is becoming important at domestic construction sites. Despite the importance of safety management, accidents at construction sites are steadily increasing. Fire accidents among safety accidents cause not only negative effects on schedule delay or work plans at construction sites, but also huge casualties. Therefore, the purpose of this research is to extract the causes of fire at the construction site through the case of fire at the construction site, and to prioritize prevention through the analysis of the factors to contribute to the prevention of fire. As a research method, we select fire factors through case, conduct surveys through expert group, and analyze survey through AHP technique. The results of the AHP analysis of the survey of expert groups showed that the workers and their sub-item ranked high. Therefore, the priority for fire prevention was given, and this research is believed to help prevent fire.
김도수,조현우,김광희,주진규,신윤석,Kim, Dosu,Joh, Hyunwoo,Kim, Gwanghee,Joo, Jinkyu,Shin, Yoonseok 한국건설관리학회 2020 한국건설관리학회 논문집 Vol.21 No.5
건설업은 국내 산업 중 안전사고가 가장 많이 발생한다. 건설업의 재해는 막대한 재산손실과 인명피해로 인한 사회적 문제로 이어지기 때문에 더 각별한 주의를 기울여야 한다. 최근 이로 인해 건설업에서 발생하는 재해에 대한 경각심이 높아지고 있으며 정부 각 부처에서는 안전관리에 관한 규정을 강화하고 있다. 특히 산업안전보건공단에서는 이번 산업안전보건법 전부개정안에서 보호대상의 확대와 책임소재의 명확화에 중점을 두고 있다. 이에 따라 발주자 책임에 의한 안전관리를 중심으로 분석한 연구가 필요한 실정이다. 따라서 본 연구에서는 건설사업관리자의 사업수행능력평가를 산업안전보건법의 전부개정안을 고려하여 안전항목을 고려하여 건설사업관리자를 선정하는 방안을 제시하고자 한다. The construction industry has the most safety accidents among domestic industries. Special care must be taken because disasters in the construction industry lead to social problems caused by huge property losses and casualties. As a result of this, there is a growing awareness of disasters occurring in the construction industry, and government departments are tightening regulations on safety management. In particular, the OSHA (Occupational Safety and Health Agency) focuses on the expansion of protection targets and the clarification of responsibility in the full amendment OSHA. As a result, a study that focuses on safety management by client's responsibility is needed. In this study, the project performance capability assessment of construction project management contractors, which is being carried out with uniform assessment criteria without considering the characteristics of the construction project, is considered and all the amendments to the OSHA are considered, and the factors were derived for improvement measures.