http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Production of copper oxide (Ⅱ) from leadframe etching waste solution
전길송,정래윤,홍인권,이승범 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.1
에칭폐액으로부터 산화구리(Ⅱ)를 제조하는 방법으로는 구리화합물을 알칼리 용액으로 중화반응을 거쳐 제조하는 공정과 구리분말을 원료로 하여 열처리 공정을 통해 산화공정을 진행하는 방법이 널리 사용된다. 산화구리(Ⅱ)는 흑색분말이며, 물에는 녹지 않고 산과 암모니아수, 시안화칼륨 용액 등에서 착염을 형성한다. 주로 유리의 녹색 또는 청색 착색제, 도료, 촉매 등으로 이용된다. 따라서 본 연구에서는 리드프레임 에칭폐액을 이용하여 염화구리를 정제하고, 실험변수로는 1단계에서의 Na<sub>2</sub>CO<sub>3</sub>의 첨가량, 반응온도와 2단계에서의 NaOH의 첨가량, 반응온도 등을 설정하였으며, 단계별 반응특성과 도금특성 분석을 통해 최적 반응조건 반응을 통해 소성과정 없이 via-filling 도금용 산화구리(Ⅱ)를 제조하고자 하였다.
Development of artificial marble hardener from Tert-Butyl hydroperoxide
전길송,이범석,이승범,홍인권 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
일반적으로 인조대리석은 천연의 광석분 또는 합성 무기 재료 분말을 필터로 하여 수지로 경화시킨 후 압축 프레스로 성형한 것이다. 여기서 인조대리석의 강도와 수명에 경화제의 역할이 크다고 할 수 있다. 경화제란 경화반응을 조절하거나 촉진시키기 위해 첨가하는 물질이다. 본 연구에서는 Tert-butyl alcohol을 출발 물질로 하여 Tert-butyl hydroperoxide(TBHP)를 합성하고, 합성된 TBHP를 원료로 하여 인조대리석용 경화제인 TBPM(Tert-Butyl Peroxy Maleate)을 합성하는 기술을 개발하고자 하였다. 또한 이때 합성된 TBHP는 수분과의 상용성이 상당히 우수한 물질이기 때문에 공기 중의 수분이 혼입이 될 가능성이 상당히 높다. 따라서 장기 보관시에는 TBHP에 수분 함량이 높을 수 있으며, 이것은 TBPM 합성시 수율이나 AO%를 저하시킬 수 있는 원인을 제공하게 된다. 이에 TBHP를 사용할 때 수분을 효과적으로 제거하거나 조절할 수 있는 공정을 개발하고자 한다.
전길송,황지현,이태원,Jeon, Kil Song,Hwang, Ji Hyun,Lee, Tea Won 한국안전학회 2021 한국안전학회지 Vol.36 No.2
Modern society shows rapid growth that is different from that of the development of existing technologies. The development of these technologies has led to the tendency of buildings to become dense, large and advancing. Regarding fire hazards, the possibility of large-scale fires causing fatal damage, due to the rapid spread of fire, increases. Therefore, for this reason, fire defense, i.e. detection and fire extinguishing facilities, in buildings are essential and well applied. But there are always limitations to that. Based on this reason, we would like to suggest the introduction of a new concept of a fire safety system. The method presented here is not only to use a single system for fire detection and fire extinguishing systems but to jointly use it in the environment and energy management fields within the building. However, an important step is required before introducing a system of these technologies. The fire extinguishing method proposed by this system is a method of extinguishing by blocking oxygen flowing into the space where the fire occurred. However, a sufficient basis is needed for this system to be applied in practice. Therefore, in this study, we intend to conduct a preliminary experiment to introduce the new concept of fire detection and extinguishing. The experiment used ethanol with a relatively simple combustion reaction and a high possibility of complete combustion. As a result, it was confirmed how the internal values changed during a fire using ethanol. Resultingly, we obtained the internal oxygen concentration and internal environmental changes according to the initial flame size. Lastly, the data accumulated in this study can be used as data for application in an automatic fire extinguishing system.
전길송,왕효정,이승범,홍인권 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
천연물 신약은 절단, 분쇄, 추출 등의 기술을 적용해 천연물 소재의 본질을 변화시키지 않고, 약효 성분을 추출하거나 정제하여 만든 의약품으로 정의한다. 최근 기존 의약품의 한계와 부작용이 적고 안정성이 뛰어나다는 장점 때문에 이 천연물 신약에 관한 시장이 매년 폭발적으로 증가하고 있다. 세계 천연물 관련 시장은 2014년 약 1,000조원 수준에 이르고 있는 것으로 추정되며, 연간 8~10%의 성장률을 기록하고 있다. 하지만 이런 천연물 시장의 확대와는 맞지 않게 기존의 전통적 추출법의 획일적인 적용으로 추출효율이 저하되고 있다. 따라서 이러한 시장 규모 확대에 발맞게 천연물 유효 성분 추출공정의 효용성 증대방법 개발이 필요하다. 본 연구에서는 기존에 사용되었던 용매-열수추출 공정뿐만 아니라 초음파 에너지 및 마이크로웨이브 에너지를 추출공정에 적용하여 추출공정에 따른 추출효율을 고찰 하였다.
Preparation of copper oxide (II) for electroplating from lead frame etching waste solution
전길송,정래윤,이승범,홍인권 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
반도체 산업의 3대 원재료인 리드프레임은 보통 구리로 만들어진 구조물로서, 반도체의 내부와 외부회로를 연결해 주는 전기도선의 역할과 반도체를 지지해주는 버팀대 역할을 하는 핵심부품이다. 구리합금소재의 리드프레임 생산방식에는 화학적인 반응을 이용하여 금속을 부식하여 제품을 생산하는 에칭(etching)방식이 있다. 이 에칭과정에서 구리가 함유된 에칭폐액이 다량 발생한다. 환경적인 측면과 에너지 재활용 측면에서 이 다량의 폐액 처리가 매우 중요하다고 할 수 있다. 따라서 본 연구에서는 고농도 리드프레임 에칭폐액의 맞춤형 정제과정을 개발하였다. 또한 에너지비용이 많이 드는 소성과정이 없는 2단계 화학반응과 연계하여 viafilling 도금용 산화구리(II) 제조공정의 최적화를 하였다.
Development of a highly pure artificial marble curing agent
전길송,이범석,홍인권,이승범 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.1
일반적으로 인조대리석은 천연의 광석분 또는 합성 무기 재료 분말을 필터로 하여 수지로 경화시킨 후 압축 프레스로 성형한 것이다. 여기서 인조대리석의 강도와 수명에 경화제의 역할이 크다고 할 수 있다. 경화제란 경화반응을 조절하거나 촉진시키기 위해 첨가하는 물질이다. 본 연구에서는 Tert-butyl alcohol을 출발 물질로 하여 Tert-butyl hydroperoxide(TBHP)를 합성하고, 합성된 TBHP를 원료로 하여 고순도의 인조대리석용 경화제인 Tert-Butyl Peroxy Maleate(TBPM)을 합성하는 기술을 개발하고자 하였다. 또한 장기 보관시나 합성시에 수율이나 AO%를 저하시킬 수 있는 수분을 효과적으로 제거하거나 조절할 수 있는 공정을 개발하고자 한다.
XRF (X-ray fluorescence)를 활용한 고온환경에 노출된 시멘트 페이스트 분석의 이해
전길송,허영선 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 논문집 Vol.27 No.6
By using XRF (X-ray fluorescence), this study investigates the variation of chemical properties in cement pastes at elevated temperatures. High-temperature conditions were prepared by using an electric furnace, planning a total of 11 target temperatures ranging from room temperature to 1000 ℃. A standard library of geo-quant basic was applied for the analysis of 12 elements in cement paste, including Ca, Si, Al, Fe, S, Mg, Ti, Sr, P, Mn, Zn and K. The results revealed that, as the temperature increased, the proportion of each element in the cement paste also increased. With the exception of a few elements present in extremely low amounts in the cement pastes, the variation in the composition ratio of most elements exhibited a strong correlation with temperature, with an R-squared value exceeding 0.98. In this study, cement pastes exposed to normal and high-temperature environments were compared. The authors established that the reasons for the different results in this comparison can be explained from the same perspective as when comparing raw cement with cement paste. Furthermore, this study discussed the potentially most dominant parameter when investigating the properties of cement paste using XRF.