http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장재웅,Jang, Jae-Woong 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.5A
본 논문에서는 위성망 자원할당 및 분석 툴(SNRAT : Satellite Network Resource Allocation & Analysis Tool)을 활용하여 위성통신체계에 대한 링크성능 분석결과를 제시하였으며, 모의위성망을 구성하여 성능분석 툴로 예측한 링크 성능을 검증하였다. 통신위성은 지상장비와 달리 정지궤도에 발사하여 궤도 내 운용을 시작하면, 더 이상 성능의 수정이나 수리가 불가능하고, 운용 가능한 수명이 제한되어 있기 때문에 적기에 배치하여 운용하는 것이 매우 중요하다. 따라서, 위성 발사 전 위성망 자원할당 및 분석 툴을 이용하여 통신품질, 지원용량 및 항재밍 성능 등을 예측하고, 모의위성망을 구축하여 지상단말과 망제어기와 같은 지상장비 및 중계기 규격의 적합성을 증명하였으며, 여러 망 운용 시나리오에 대한 시험을 통해 최적의 운용방안을 도출하였다. In this paper, it is proposed the link performance analysis results using SNRAT(Satellite Network Resource Allocation & Analysis Tool) and verified the anticipated results by satellite communication network simulator. A communication satellite cannot be corrected or fixed for the error in orbit operation after launching unlike the ground operation equipment and has a restricted operation life. So, it is important to make possible to use satellite communications in the proper time. It is expected the link BER(Bit Error Rate), throughput and AJ(Anti-Jamming) performance using SNRAT tool before launching. And it is verified the performance of the repeaters and ground equipment specification using the satellite network simulator and is extracted the optimum operational scenarios through the tests of various network operational plans.
외압을 받는 수중 운동체 실린더형 동체의 구조 강건성에 관한 연구
장재웅(Jae-Woong Jang),이기선(Gi-sun Lee),신명섭(Myung-Sub Shin),전관수(Kwan-Soo Jeon) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
External water pressure acts on the underwater body according to the depth of operation, and structural robustness of the body is required to perform the stable function and performance of the system in the relevant operating environment. To this end, the buckling effect according to the working water pressure and the water pressure was considered. The structural design of the body was carried out in reference to the ASME rules, and this was reviewed by performing finite element analysis, and the structural robustness was verified through hydrostatic pressure tests.
수중운동체 구동타의 Winglet 장착에 따른 유동 특성 해석
장재웅(Jae-woong Jang),송재강(Jae-kang Song),최재엽(Jae-yeob Choi) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
The wing-tip devices are usually intended to improve of fixed-wing aircraft. The intended effects are to reduce the aircraft drag by partial recovery of the tip vortex energy and induced drag. In this paper, the wing-tip devices are applied to under-water vehicle. This study researches and confirms the effect of wing-tip devices applied to under-water vehicle by using CFD analysis.
외압을 받는 수중 운동체 실린더형 동체의 구조 강건성에 관한 연구
장재웅(Jae-Woong Jang),이기선(Gi-sun Lee),신명섭(Myung-Sub Shin),전관수(Kwan-Soo Jeon) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
External water pressure acts on the underwater body according to the depth of operation, and structural robustness of the body is required to perform the stable function and performance of the system in the relevant operating environment. To this end, the buckling effect according to the working water pressure and the water pressure was considered. The structural design of the body was carried out in reference to the ASME rules, and this was reviewed by performing finite element analysis, and the structural robustness was verified through hydrostatic pressure tests.
영상레이더 위성시스템 구조물의 RF 간섭특성 분석 및 검증
장재웅(Jae-Woong Jang),김태윤(Tae-Yoon Kim),임성빈(Seong-Bin Lim) 한국항공우주연구원 2009 항공우주기술 Vol.8 No.1
지구관측을 위한 영상레이더 위성시스템은 고전력의 고주파 신호를 방출하는 영상레이더를 비롯하여, 획득한 영상 이미지 전송을 위한 데이터 링크 시스템, 위성 운용을 위해 지상과 통신하기 위한 원격측정명령계 시스템 등의 다양한 주파수를 가지는 RF 시스템을 탑재한다. 각각의 시스템은 다양한 주파수 성분을 가진 RF 신호를 송출할 뿐만 아니라 매우 높은 RF 전력을 복사하므로 위성체에 장착된 전기전자부품에서의 복사 내성 규격을 초과할 수 있다. 또한, RF를 송수신하는 여러 서브 시스템간 간섭 문제가 발생할 수 있다. 따라서, 영상레이더 위성과 동일한 형상을 가진 시스템 구조모델을 제작하고 위성에 탑재되는 RF시스템과 유사한 전기적인 특성을 가지는 안테나를 제작 및 설치하여 위성 운용시 발생할 수 있는 RF 간섭에 의한 영향을 분석 및 검증하였다. Synthetic Aperture Radar(SAR) satellite system for broad-area imaging has RF systems including SAR radiating a high power, data link system transmitting the acquired image data from the SAR, TC&R(Telemetry, Command, and Ranging) to communicate with a ground segment to control a satellite. Each system transmits RF signal having various frequencies and radiates a high power, RS(Radiated Susceptibility) specification should be verified at an electronic unit mounted in satellite. RF interference can be happened because of non-linearity of a RF system. Therefore, we manufactured a structure model installed antennas which have a similar pattern with a real antenna, the effect by RF interference is analyzed and verified.
광학위성 카메라전자부 EMC 시험결과의 시스템 양립성 검토
장재웅(Jae-Woong Jang),김태윤(Tae-Yoon Kim),임성빈(Seong-Bin Lim),문귀원(Guee-Won Moon) 한국항공우주연구원 2010 항공우주기술 Vol.9 No.2
지구관측을 위한 광학위성에 탑재되는 고해상도 영상 획득을 목적으로 하는 위성카메라의 카메라전자부(CEU : Camera Electronic Unit)는 CC(Camera Controller)와 FPA(Focal Plane Assembly), CEUP(CEU Power supply)로 구성된다. 본 논문은 광학위성 탑재체(CEU)의 전자파시험결과와 이를 토대로 한 시스템 양립성 검토결과를 설명하였다. CEU의 1차 전자파시험은 전도성 방출시험, 전도성 감응시험, 복사성 방출시험 및 복사성 감응시험을 수행하였고 2차 시험에서는 1차 시험에서 규격을 만족하지 못함으로서 시스템 성능에 중요한 영향을 미칠 수 있는 복사성 방출시험과 복사성 감응시험을 차폐제를 이용하여 기구적인 차폐를 보강 후 수행하였다. 2차 시험결과에 대한 시스템 양립성은 탑재체(CEU)에서 방출하는 노이즈의 주파수성분이 위성의 GPS/S-Band 수신 성능에 미치는 영향성을 분석하였다. 기구적인 차폐보강이 전제되었을 때, 두 수신대역내에서 발생하고 있는 노이즈 주파수성분에 대하여 6㏈ 이상의 마진을 갖는 것으로 나타났다. CEU(Camera Electronic Unit) loaded in optical satellite for a high resolution image acquisition is composited with CC(Camera Controlloer), FPA(Focal Plane Assembly) and CEUP(CEU Power supply). EMC test and analysis results are explained in this paper. CE, CS, RE and RS test is performed in the 1st EMC test, RE, RS test which is not complied and influence considerably after shielding structure is performed in the 2nd EMC test. An effect due to the noise of CEU in the GPS/S-band receiving band is analyzed based on 2nd EMC test results. Margin more than 6dB is guaranteed when CEU is shielded.
장재웅(Jae-Woong Jang),이창민(Chang-Min Lee),전관수(Kwan-Soo Jeon) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
A projectile or a high speed entry underwater kinetic body is impacted by a high frequency. Therefore, electronic devices in the kinetic body need to be designed for shock-resistant structures. The structure, layout and stability of circuit card assemblies in electronic equipment were reviewed in consideration of impact direction and impact volume. The modified circuit card assembly is arranged to be stable against the impact of high frequency. And equipment housing was designed to resist against the impact. Based on the acquisition data of MIL-STD-901 Lightweight Shock Test (LWST) and MIL-T-18404 drop table test, modal analysis and SRS analysis were performed to review structural stability of equipment.