http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이수현(李守賢),이동엽(李東燁) 서울대학교 교육연구소 2013 아시아교육연구 Vol.14 No.2
본 연구는 외국에서 개발된 학업소진척도(MBI-SS)의 국내 타당화를 목적으로 수행되었다. 이를 위해 의과대학 재학생들(4개 학년, 총 382명)을 대상으로 학업소진 설문지를 실시하고 신뢰도 및 타당도를 확인하였다. 탐색적 요인분석 결과 3개의 하위요인(정서적 고갈, 무능력감, 냉소성), 총 14문항(정서적 고갈 5문항, 무능력감 5문항, 냉소성 4문항)이 적절한 것으로 나타났다. 이 같은 요인구조 모델이 적합한지 확인하기 위해 확인적 요인분석을 실시한 결과 3요인 모형이 적절함을 확인할 수 있었다. 또한 각각의 하위요인이 적절한 신뢰도를 지니는 것으로 나타났다. 마지막으로 학업소진 척도는 우울과 정적상관을, 학업효능감과는 부적상관을 갖는 것으로 나타나 적절한 타당도를 지니고 있음이 확인되었다. 이러한 분석 결과를 바탕으로 본 연구의 의의와 제한점을 논의하였다. The MBI-SS (Maslach Burnout Inventory-Student Survey) Scales were validated using 382 medical students who were attending a university in Seoul. Exploratory factor analysis yielded 3 factors with 14 items (5 items in exhaustion, 5 items in inefficacy, and 4 items in cynicism). After EFA, the hypothesized model was verified by confirmatory factor analysis, and the model was found in the good fit. Each factor also produced adequate internal consistency. Finally, it was found that factor-derived scale scores were related to scores on a measure of CES-D (The Center for Epidemiologic Studies-Depression) Scale, negatively related to academic efficacy. Significances and implications of the study were discussed.
이수상 한국광학기기산업협회 1999 光學世界 Vol.11 No.5
대우고등기술연구원 이수상 책임연구원이 '광학세계' 독자들을 위해서 광학부품 제조의 전 과정, 가공별 특징, 공정별 주의사항을 정리한 내용이다. 지난 6월 28일 열린 '99 광기술교육'(인하대학교 광기술교육센터 주최)에서 강의한 '정밀광학부품의 제작' 가운데 현장에서 필요한 '가공 공정'부분을 쉽게 이해하고 활용할수 있도록 이수상 연구원이 다시 설명을 덧붙였다. 이번 호에 이어서 11월호까지 2회에 나눠서 연재한다.
리오셀 섬유의 가교 처리가 탄소 직물 특성에 미치는 영향
이수오,박길영,김우성,황태경,김연철,서상규,정용식 한국추진공학회 2019 한국추진공학회지 Vol.23 No.6
Cellulose-based carbon fabrics are used in aerospace nozzles have low thermal conductivity and high ablation resistance. However, there is a disadvantage in that the weight is reduced by 70∼90% in the pyrolysis process and graphitization process and the residual rate is low when the final carbon fabric is produced. In this study, phosphoric acid as a phosphorus flame retardant and Citric acid as a cross-linking agent were treated on the lyocell fabrics. After that the functional groups were identified and thermal properties were confirmed by FT-IR, XRD and TGA. The yields of the final carbon fabrics were also compared through the pyrolysis and graphitization process. The graphitized yield increased to 8.1% with increasing citric acid to 16 wt% added. 우주 항공용 노즐에 사용되는 셀룰로오스계 탄소 직물은 낮은 열전도도, 높은 내삭마 특성을 가지고 있다. 그러나 내염화 및 흑연화 공정에서 70∼90% 중량이 감소하여 최종 탄소 직물 제조 시 수율이 낮은 단점이 있다. 본 연구에서는 리오셀 직물에 인계난연제로 인산(Phosphoric acid), 가교제로시트르산(Citric acid)을 사용하여 전처리한 후 FT-IR, XRD, TGA 분석을 통하여 화학적 구조 및 열적 특성 변화를 확인하였다. 또한 리오셀 직물의 내염화 및 흑연화 후 중량을 측정하여 시트르산이 리오셀 직물 수율 변화에 미치는 영향에 대하여 확인하였으며, 16 wt% 첨가 시 흑연화 수율이 8.1% 까지 증가하는 것을 확인하였다.