Inelastic Buckling Behavior of I-Beam with Unequal End Moment

이동식,오순택,Lee, Dong Sik,Oh, Soon Taek Korean Society of Steel Construction 2004 韓國鋼構造學會 論文集 Vol.16 No.2

The aim of this study is to investigate the inelastic buckling behavior of the beams under moment gradient using a line-type finite element method. The method is incorporated the non-uniform yielding of the cross-section caused by the presence of residual stress and accepted model of residual stress so called 'simplified' and 'polynomial' pattern is adopted in this study. The inelastic lateral-torsional buckling results obtained in this study is compared with the buckling results obtained from the design method based on the allowable stress method given in Korean Steel Designers Manual (KSDM 1995). This study have found that the design method in KSDM (1995) is conservative without and with intermediate bracing applied at the mid span of the beam, and there is some scope for improving the provisions of KSDM (1995) line-type 유한요소법을 이용하여 불균등 단부 모멘트를 받는 보의 비탄성 좌굴 거동에 대하여 연구하였다. 잔류응력은 단순형과 다항식형 모델을 채택하였으며 잔류응력으로 인해 발생하는 단면의 불균등 항복을 고려하였다. 본 연구에서 얻어진 비탄성 횡-비틀림 좌굴에 대한 결과는 강구조편람의 허용응력법에 의한 설계 경우와 비교하였다. 결과적으로, 강구조편람에 의한 설계는 중지간 보에서 중간 브레이싱이 있는 경우나 없는 경우 모두 과설계가 됨을 알 수 있었다.

열적 피로 및 충격이 부가된 Carbon-Epoxy 복합재료의 기계적 특성에 관한 연구

이동식,박세만,Lee, Dong-Sik,Park, Se-Man 한국재료학회 2000 한국재료학회지 Vol.10 No.5

자동차, 항공기 및 기타 산업에서 복합재료의 사용은 증가되어 왔고 활발한 연구가 진행되고 있다. 이러한 복합재료중의 하나인 carbon-epoxy 복합재료의 열 특성에 관하여 알아보았다. 반복적인 냉각과 가열이 부가된 후 복합재료의 탄성계수의 변화를 관찰하여 봄으로써 복합재료가 가지고 있는 여러 열 특성에 관하여 여러 열 특성에 관하여 연구하였다. 이 연구에서는 G(sub)13값은 약한 감소하기는 하였으나 별다른 변화를 보이지 않았으며 열충격의 경우가 열피로의 경우보다 변화량이 작았다. $E_1$값은 가해진 온도와 가열 횟수에 따라하여 조금씩 증가하였고,$ E_2$, G(sub)23값은 열피로의 경우 처음에는 어느 정도 그 값이 감소하나 가해진 횟수에는 큰 영향을 받지 않았으며 열충격의 경우에는 온도에 따라 다른 현상을 보였다. Applications of composite materials have been in progress noticeably in manufacturing areas of automotive, aircraft and in other industries, resulting in ensuing research activities. Carbon-epoxy, one of major composite materials, is investigated for its thermal characteristics. Upon treatments of the composite material with repeated heatings and coolings variations of its elastic constants are monitored to reveal the thermal nature of the composite material. In this study, generally, changes in elastic constants are observed to occur mostly during the first 10~20 thermal cycles. Values of G(sub)13 remain almost unchanged except a minor decrease. However in the observed small changes thermal shocks produce less effect than thermal fatigues. On the other hand, values of $E_1$show gradual increases with the num-ber of applied thermal cycles and temperatures. Meanwhile, values of $E_2$ and G(sub)23 decrease to a certain extent in the early stage during the applications of thermal cycling but are not appreciable affected by frequencies of thermal cy-cles. Also, thermal shocks are observed to induce different effects depending on treatment temperatures.

열피로가 부가된 Carbon-Epoxy 복합재료의 탄성계수 변화에 관한 연구

이동식,김형삼,이재혁,박세만,Lee, Dong-Sik,Kim, Hyeong-Sam,Lee, Jae-Hyeok,Park, Se-Man 한국재료학회 1999 한국재료학회지 Vol.9 No.8

Composite materials have been increasingly used in automotive and aircraft industries, naturally leading to active researches on the materials. Carbon-epoxy composites, one of major composite materials, are investigated to determine their thermal characteristics. Under conditions of thermal fatigues composed of repeated heatings and coolings, variations of elastic constants are studied for the carbon-epoxy composites to reveal the thermal nature of the composites. In general, composite materials are known to have decreasing elastic constants with increasing temperatures. However, in contrary to this commonly observed behavior, the results obtained in this investigation for the elastic constants of the carbon-epoxy composites show unexpected phenomena in that the elastic constants initially increase with increasing temperatures to certain point and decrease later with further increase in temperatures when the carbon-epoxy composites are subjected to thermal fatigues. 자동차, 항공기 및 기타 산업에서 복합재료의 사용은 증가되어 왔고 활발한 연구가 진행되고 있다. 이러한 복합재료중의 하나인 Carbon-epoxy 복합재료의 열 특성에 관하여 알아보았다. 반복적인 냉각과 가열이 부가되는 열 피로에서 복합재료의 탄성계수의 변화를 관찰하여 봄으로써 복합재료가 가지고 있는 여러 열 특성에 관하여 연구하였다. 일반적으로 복합재료는 온도가 증가하면 탄성계수가 감소한다고 알려져 있다. 이러한 결과와는 달리 본 연구에서 수행한 실험에서는 열 피로가 부가되었을 때에는 어느 정도 온도까지는 탄성계수가 증가하다가 다시 감소하는 특이한 현상을 관찰할 수 있었다.

석조문화재 표면 산화물의 산출상태와 지구화학적 거동: 익산 미륵사지 석탑

이동식,이찬희,양희제,최기영,Lee, Dong-Sik,Lee, Chan-Hee,Yang, Hee-Jae,Choi, Ki-Young 대한자원환경지질학회 2007 자원환경지질 Vol.40 No.4

국보 제11호 익산미륵사지석탑은 현재 문화유산의 원형보존을 위하여 해체복원 중이다. 이 석탑의 구성암석은 비교적 풍화에 강한 화강암으로 이루어져 있으나 오랜 세월 동안 대기환경에 노출되면서 다양한 형태의 오염물이 피복되어 원암의 색상을 잃었다. 이 연구에서는 이차적 무기오염물을 성인적 유형으로 세분하고, 육안으로 확연히 판별되는 산화 변색된 부재만을 엄선하여 오염물질의 산출상태 및 오염종을 정량분석 하였다. 또한 용해실험을 통해 가용성 오염종의 지구화학적 거동특성을 규명하고 세정방법 및 효과 등을 분석하여, 표면 세정제의 보존과학적 적용가능성을 검토하였다. The Iksan Mireuksaji stone pagoda, designated as national treasure No. 11 in Korea, has been in the process of disassembling for reconstruction as part of the cultural heritage conservation program. The pagoda is mainly consisting of granite, which is relatively resistant to weathering. However, it has lost its original rock color due to various contaminants deposited at the surface since it exposed to the atmospheric environment long time. In this research, we categorized the secondary inorganic contaminants into the genetic type, and also quantitatively examined occurrences and types of pollutants in the oxidation area of the pagoda surface in which the area is clearly distinguished by naked eyes. Geochemical behavior of soluble pollutants through reaction experiments are demonstrated, and effective methods of cleaning for the conservation and scientific applicability of the surface cleaner are also studied.

(1)뉵혈 (2)혈뇨 (3)혈붕 (4)혈변 험방

이동식,Lee, Dong-Sik 대한한약협회 1999 大韓漢藥 Vol.3 No.-

MC3T3-E1 세포증식 및 골기질 단백질 발현에 대한 인슐린유사성장인자-I의 효과

이동식,이재목,서조영,Lee, Dong-Sik,Lee, Jae-Mok,Suh, Jo-Young 대한치주과학회 2000 Journal of Periodontal & Implant Science Vol.30 No.2

The purpose of this study is to evaluate the effect of IGF-I for DNA synthetic activity and the mRNA expression of bone matrix protein, type I collagen and osteopontin in prolifetation and differentiation of MC3T3-E1 cells. To evaluate DNA synthetic activity, cells were seeded at $2{\times}10^4cells/ml$ in 24 well plates and to evaluate mRNA of type I collagen and osteopontin cells were seeded at $5{\times}10^5cells/ml$ in 100mm culture dishes. These cells were cultured in alpha-minimum essential medium(${\alpha}-MEM$) containing 10% fetal bovine serum at $37^{\circ}C$, 5% $CO_2$ incubator. For DNA synthetic activity test 1, 10, 100ng/ml IGF-I were added to the cells which had been cultured for 3 days before 24 hours. For type I collagen mRNA expression 1, 10ng/ml IGF-I were added to the cells which had been cultured for 5, 10 days and for osteopontin mRNA expression 0.1, 1, 10ng/ml IGF-I were added to the cells which had been cultured for 5, 15, 20 days. Cell proliferaton was measured by the incorporation of [$^3H$]-thymidine into DNA and expression for type I collagen and osteopontin were measured by northern blot analysis. The results were as follows : DNA synthetic activity were generally higher in experimental group than control group. Expressions of type I collagen mRNA were higher at 5 day group and much lower at 10 day group in the control groups. In the experimental groups, mRNA expressions were slightly increased when 1 ng/ml IGF-I were added to 5 day group and decreased in all experimental 10 day groups. Expressions of osteopontin mRNA were higher at 20 day groups and lower at 15 day groups than the control groups. In the experimental groups, mRNA expressions were incereased when 0.1, 1 ng/ml IGF-I were added to 5 day group and in all the 15 day groups, but decreased when 0.1, 1, 10 ng/ml IGF-I were added to 20 day groups. IGF-I stimulated DNA synthetic activity of MC3T3-E1 cells during proliferation stage significantly, did not greatly changed effects on type I collagen mRNA expression and stimulated osteopontin mRNA expression at 15 day especially. In conclusion, we suggests that IGF-I have a tendency of stimulation effect of DNA synthetic activity but do not stimulate type I collagen mRNA in proliferation stage of MC3T3-E1 cell cultures, and stimulate osteopontin mRNA in differentiation stage of MC3T3-E1 cell cultures.

Inelastic Buckling Behavior of Simply Supported I-Beam under Transverse Loading

이동식,오순택,Lee, Dong Sik,Oh, Soon Taek Korean Society of Steel Construction 2004 韓國鋼構造學會 論文集 Vol.16 No.1

In this paper, the inelastic buckling behavior of the beam under uniform bending was investigated using the energy-based method, which can tackle problems in fourth order eigenvalue. The pattern of residual stress was not available to satisfy the I-sections manufactured in Korea. however; therefore, the well-known polynomial and simplified pattern of residual stress was adopted in this study. The inelastic lateral-distortional buckling behavior of the beam with I-sections manufactured in Korea was investigated. The study was then extended to the inelastic lateral-torsional buckling of the beam by minimizing the out-of-plane web distortion. The inelastic lateral-torsional buckling results obtained in this paper were compared with the prediction of allowable bending stress given in the Korean steel designers' manual (1995). Results showed that the importance of inelastic lateral-distortional buckling did not arise for beams under uniform bending. Likewise, the design method in KSDM (1995) was proven to bo too conservative for intermediate and short spans of beams without intermediate bracing. 각각 집중하중과 등분포하중을 받는 단순보의 비탄성 횡-비틀림 좌굴에 대하여 연구하였다. 잔류응력을 단순형과 다항식형으로 하여 line-type 유한요소법으로 해석하였다. 잔류응력의 형태는 플랜지에서는 4차 곡선으로 웨브에서는 2차 곡선으로 가정하였다. 우리나라에서 생산되는 4종류의 I형강에 대하여 비탄성 횡-비틀림 좌굴에 대하여 해석한 후 결과를 강구조편람의 내용과 비교하였다. 해석결과로부터 강구조 편람에 의한 설계는 주보에 보조보가 있는 경우나 없는 경우 모두 전반적으로 과설계임을 알 수 있었다.

전통사상과 현대의학-도와 과학

이동식,Lee, Dong-Sik 한국과학기술단체총연합회 1980 과학과 기술 Vol.13 No.5

Biochemical Changes of the Nerve Cells of Rats under Restraint Stress

이동식,전양현,이진용,홍정표,Lee, Dong-Sik,Chun, Yang-Hyun,Lee, Jin-Yong,Hong, Jung-Pyo The Korean Academy of Orofacial Pain and Oral Medi 2001 Journal of Oral Medicine and Pain Vol.26 No.3

스트레스가 인체의 항상성에 영향을 미쳐 다양한 질병 및 동통을 일으킬 수 있다는 것은 선학들의 연구에 의해 증명되어 왔다. 특히 정서적으로 중요한 구강안면영역에는 스트레스와 관련된 질병 및 동통이 많이 존재하는데, 이에대한 병리적 기전은 아직 뚜렷하게 밝혀져 있지 않다. 이에 저자는 스트레스와 말초 및 중추신경과의 병리적 관계를 알아보고자, 구속스트레스하에서 구강안면영역의 감각과 운동에 중요한 역할을 하는 삼차신경의 집합체인 삼차신경절과 뇌간조직의 단백질 변화를 western blot을 통해 살펴보았다. 실험동물은 생후 8주된 Sprague-Dawley계 웅성 백서 (323-367 g/bw)를 대조군 3마리, 실험군 15마리로 배정하였고 실험군은 실험 전기간에 걸쳐 구속스트레스를 부여하였다. 실험동물의 삼차신경절과 뇌간은 희생 즉시 적출되었으며, western blot을 시행하여 다음과 같은 결론을 얻었다. 1. 삼차신경절의 모든 군에서 약 18 KDa의 단백질이 균일하게 나타났다. 2. 뇌간의 모든 군에서 약 18 KDa 단백질이 발현되었으며, 정상 대조군, 실험 즉일, 1일, 3일, 7일에서는 뚜렷한 변화가 없었으나 실험 5일군에서는 현저한 감소를 보였다. 구속스트레스에 의해 뇌간의 5일군에서 약 18 KDa의 특수한 단백질이 뚜렷이 감소된 후 7일 군에서 다시 증가되었던 것은 스트레스에 의한 뇌간세포의 반응으로 생각되며, 뇌간에서와 다르게 삼차신경절에서는 그 변화가 나타나지 않았던 것은 스트레스에 대한 조직의 반응 차이라고 생각된다. 따라서 이를 명확하게 확인하기 위해서는 향후 수종의 스트레스와 관련된 단백질 변화에 대한 추가적인 연구가 필요하리라 사료된다.

비정형 삼차신경통의 치험례

이동식,홍정표,Lee, Dong-Sik,Hong, Jung-Pyo 대한안면통증구강내과학회 2000 Journal of Oral Medicine and Pain Vol.25 No.2

The patient, 62-years-old woman, had a constant dull pain in the right mandible and an intermittent spontaneous burning sensation of the mouth. The pain began 6 months ago. About 5 years ago, a trauma in her right mandible which was so severe that kept her in the hospital for 2 days. This was followed by mouth opening disturbance with pain for about 2 years. However, she did not have a treatment for the temporomandibular disorder symptoms. After then, she experienced the trigeminal neuralgia characterized by an electrical pain which lasted about 30 minutes in her right face and head when touching the skin or hair. After taking a year course treatment of trigeminal neuralgia, the symptom disappeared. The pain was a constant dull pain and a intermittent burning pain which are contradictory. And the pain responded to various modalities such as physical therapy, anti-inflammatory drug, carbamazepine, and amitriptyline, among which carbamazepine was most effective. The diagnosis was clinically made as an atypical trigeminal neuralgia. The term 'atypical' is used when there is something unknown and the problem is not identified. It is thought that an atypical pain may be approached in the perspective of chronic pain, neuropathic pain, and myofascial pain, the mchanisms of which are poorly understood. As the knowledge of pain physiology improves, there needs to be modification and re-evaluation. Pain disorders must be classified on the basis of an understanding of the underlying mechanism and etiology.