http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Li[Ni<sub>0.2</sub>Li<sub>0.2</sub>Mn<sub>0.6</sub>]O<sub>2</sub> 양극물질의 Ag 도핑(Doping) 효과
유제혁,김석범,박용준,Ryu, Jea-Hyeok,Kim, Seuk-Buom,Park, Yong-Joon 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.3
Ag doping effect on $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode material was studied. Specially, we focused on rate performance of Ag doped samples. The $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ powder was prepared by simple combustion method and the Ag was doped using $AgNO_3$ during gelation process. Based on X-ray diffraction analysis, there was no structural change by Ag doping, but the 'metallic' form of Ag was included in the doped powder. Both bare and Ag 1 wt.% doped sample showed similar discharge capacity of 242 mAh/g at 0.2C rate. However, as the increase of charge-discharge rate to 3C, Ag 1 wt.% doped sample showed higher discharge capacity (172 mAh/g) and better cyclic performance than those of bare sample. The discharge capacity of Ag 5 wt.% doped sample was relatively low at all rate condition. However it displayed better rate performance than other samples.
Li[Ni<sub>0.3</sub>Co<sub>0.4</sub>Mn<sub>0.3</sub>]O<sub>2</sub> 양극물질의 Li-La-Ti-O코팅 효과
이혜진,윤수현,박보건,유제혁,김관수,김석범,박용준,Lee, Hye-Jin,Yun, Su-Hyun,Park, Bo-Gun,Ryu, Jea-Hyeok,Kim, Kwan-Su,Kim, Seuk-Buom,Park, Yong-Joon 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.10
Li(Ni, Co, Mn)$O_2$ has been known as one of the most promising cathode materials for lithium secondary batteries. However, it has some problems to overcome for commercialization such as inferior rate capability and unstable thermal stability. In order to address these problems, surface modification of cathode materials by coating has been investigated. In the coating techniques, selection of coating material is a key factor of obtaining enhanced properties of cathode materials. In this work, we introduced solid electrolyte (Li-La-Ti-O) as a coating material on the surface of $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Specially, we focused on a rate performance of Li-La-Ti-O coated $Li[Ni_{0.3}Co_{0.4}Mn_{0.3}]O_2$ cathode. Both bare and Li-La-Ti-O 2 wt.% coated sample showed similar discharge capacity at 0.5C rate. However, as the increase of charge-discharge rate to 3C, the coated samples displayed better discharge capacity and cyclic performance than those of bare sample.
신재생에너지 리튬 이차전지용 양극물질의 표면개질기술 동향
박용준 ( Yong Joon Park ),유제혁 ( Jea Hyeok Ryu ),윤수현 ( Su Hyun Yun ) 한국공업화학회 2008 공업화학전망 Vol.11 No.4
1992년부터 개발된 리튬 2차 전지는 개인용 휴대기기의 대중화로 인해 급속한 팽창기를 거쳐 현재에 이르고 있다. 최근에는 고유가로 인해 HEV (hybrid electric vehicle), PHEV (Plug-in hyrbid electric vehicle) 등의 수요증가로 새로운 대형 리튬 2차 전지 시장이 창출되고 있어 관련 산업계를 흥분시키고 있다. 또한 응용분야의 다양화로 인하여 요구되는 성능 역시 다양해지고 있으며 최근 문제시 되고 있는 안전성에 대한 관심이 높아지고 있으므로 리튬 2차 전 지를 이루고 있는 각각의 구성물에 대한 세심한 연구개발이 필요시 되고 있는 시점이라 하겠다. 특히 리튬 2차전지의 용량과 사이클 수명, 안전성에 절대적인 영향을 미치는 양극물질의 경우 기존에 사용되고 있는 LiCoO2 등이 사용자가 요구하는 용량, 구조적 안정성, 열적 안전성 등을 충분히 충족시키지 못하므로 이를 해결하고 좀 더 우수한 성능의 양극물질을 개발하기 위한 노력이 꾸준히 진행되어 왔다. 본 논문에서는 양극물질의 여러 문제점을 해결하기 위한 노력의 하나로 시도되고 있는 표면개질기술에 대한 연구동향을 통해 앞으로의 활용전망을 알아보고자 한다.