http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
방건혁(GeonHyeok Bang),이재훈(Jaehoon Lee),허광희(Gwanghee Heo),서상구(Sang Gu Seo),전승곤(Seunggon Jeon) 한국방재학회 2023 한국방재학회논문집 Vol.23 No.4
우리나라같이 산지가 많은 경우, 소규모 저류시설이 많아지며, 저류시설에서 이용되는 수문의 개폐장치의 안전성은 매우 중요하다. 최근 유압을 이용한 수문의 개폐장지는 개폐과정에서 시간이 지남에 따라서 유압의 손실로 자중으로 인한 처짐이발생을 하게 되는데, 이와 같은 수문의 처짐 문제를 해결하기 위하여 유압손실 방지용 고정장치를 사용하게 된다. 본 연구는 수문의 고정장치의 안전성을 이론과 수치적인 검토를 통하여 적정한 수문의 안전설계를 유도하고자 한다. 우선, 이론적으로수문 고정장치의 안정성을 확보하기 위해서 고정장치의 단면 높이를 고려한 단면환산을 통하여 고정장치를 단순화하여해석을 하였다. 그리고 단순화된 고정장치는 연결 형태에 따라 지점 조건들을 가정하고, 고정장치에 작용하는 하중을 조건으로단면환산이 고려된 고정장치에서 발생하는 최대처짐을 계산하였다. 이와 같은 구조해석을 통하여 최대 처짐 문제와 고정장치에서 발생하는 응력을 확인하고 그에 대한 안전성을 판단하여 고정장치의 안전기준을 제시하였다. 비교검증을 위하여 수행한 FE 수치해석은 고정장치는 등질등방성의 선형탄성의 조건으로 해석하였다. 이 결과 펌프식 수문의 고정장치의 안전성 확보를위한 이론적, 수치적인 검증을 통하여 펌프식 수문 고정창치의 안전설계 방법을 제시하였다. In several mountainous areas in Korea, the number of small-scale storage facilities are on the rise. The safety of the opening and closing devices of sluice gates used in storage facilities is important. Recently, during the opening and closing of a water gate that used hydraulic pressure, sagging had occurred owing to the loss of hydraulic pressure over time. To solve the sagging problem of the water gate, a hydraulic loss prevention fixing device is used. The purpose of this study is to induce the safety design of a water gate through a theoretical and numerical review of the safety of a fixing device of the water gate. First, to theoretically secure the stability of the water gate fixing device, the fixing device was simplified and analyzed using the transformed-section method considering its cross-sectional height. In addition, the simplified fixing device assumed the point conditions according to the connection type, and the maximum deflection occurring in the fixing device was calculated considering the cross section conversion under the condition of the load acting on it. Through this structural analysis, the maximum deflection problem and stress generated in the fixing device were confirmed, and the safety of the fixing device was assessed to present its safety standard. The FE numerical analysis performed for comparative verification was interpreted as a condition of linear elasticity of isotropy in the fixing device. Consequently, a safety design method for the pump-type water gate fixing device was presented through the theoretical and numerical verification for securing its safety.
이재훈(Jaehoon Lee),방건혁(GeonHyeok Bang),허광희(Gwanghee Heo),최범균(Beom Gyun Choi),이유재(Yujae Lee) 한국방재학회 2023 한국방재학회논문집 Vol.23 No.4
한국의 지형은 산지 면적이 국토의 70%를 차지하고 있다. 이러한 특징을 고려한 수자원 확보 방안은 가동보를 이용한 소규모 저류지를 활용하는 것이다. 본 연구에서는 저류지의 저층에서 물을 배출할 수 있는 가동보를 개발하고자 한다, 저층으로물을 배출할 수 있는 가동보의 구조적인 안전성을 평가하기 위해서 수치적인 해석(FEM 해석)과 이론적인 해석을 병행하여상호의 결과값을 비교 분석함으로써 가동보의 안전성을 평가하였다. 본 연구에 사용한 가동보는 수문 본체와 하단배출 수문으로분류하여 해석되었다. 먼저 수문본체와 하단 배출수문을 단순화 하여 진행하고 응력, 처짐, 비틀림 등을 계산하여 안전성평가를 수행하였다. 단순화 작업이 완료된 수문본체와 하단 배출수문을 대상으로 기립각의 요소에 변수를 적용해서 FEM 해석을 진행하여 인장, 압축, 전단응력을 계산하였다. 수문본체의 경우에 기립각의 변수를 30°, 60°, 64°로 분류해서 해석을하였다. 하단 배출수문의 경우에는 회동링크 축의 변수를 두께가 20 mm, 22 mm, 24 mm, 26 mm로 분류해서 해석하였다.저층수 배출이 가능한 가동보를 수분 본체와 하단배출 수문으로 분류하여 안전성을 분석한 결과, 주어진 조건의 가동보를구성하는 요소들이 허용응력을 초과하지 않았으므로 구조적으로 안전한 요소임을 확인하였며, 설계한 가동보가 설계 수위에따른 수압을 지탱하도록 구조적으로 안전하게 설계되었음을 확인하였다. Korea topography accounts for 70% of the country's land area. A plan to secure water resources considering this characteristic is to utilize small-scale reservoirs using movable weirs. In this study, we aim to develop a movable weir that can discharge water from the bottom of the reservoir and evaluate the structural safety of the movable weir that can discharge water to the bottom layer; the safety of the movable weir is evaluated by comparing and analyzing the results of each other. The movable information used in this study was classified into two types (water body and bottom discharge sluice gate) according to usability and the installation location. First, the design of the hydrological body and lower discharge hydrological gate were simplified, and the simplification was evaluated by calculating stress, sagging, and twisting. Tensile, compression, and shear stresses were calculated by conducting FEM analysis by applying variables to the elements of the standing angle to the hydrological body and lower discharge hydrological gate where the simplification work was completed. In the case of the hydrological body, the variables of the standing angle were classified into and analyzed. In the case of the lower discharge hydrological gate, the variables of the rotating link axis were classified into 20 mm, 22 mm, 24 mm, and 26 mm in thickness and analyzed. Determining safety by classifying mobile beams capable of discharging low-rise water into moisture bodies and lower discharge sluices confirmed that the components of mobile beams under a given condition did not exceed allowable stress.
임재수 ( Lim Jae-soo ),방건혁 ( Bang Geon-hyeok ),허광희 ( Heo Gwang-hee ),김충길 ( Kim Chung-gil ),박채린 ( Park Chae-rin ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 논문에서는 펌프식 수문의 펌프 유압 손실에 따른 탈착걸쇠장치의 안정성 확보를 위한 관리 기준치를 구조해석을 통하여 제안하고자 하였다. 구조해석은 MIDAS와 I-DEAS로 진행하였으며, 펌프유압 손실에 따른 탈착걸쇠장치의 탈착링크에 응력이 집중되는 것을 확인하였다. 관리 기준치 제안을 위하여 탈착링크에 작용하는 전단력과 축방향력을 증가시켜가며 구조해석을 진행하였다. 최종적으로 탈착걸쇠장치의 안전성 유지를 위한 최대 전단력과 축방향력을 제시하였다.
임재수 ( Lim Jae-soo ),방건혁 ( Bang Geon-hyeok ),허광희 ( Heo Gwang-hee ),김충길 ( Kim Chung-gil ),박채린 ( Park Chae-rin ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 논문에서는 펌프식 수문의 펌프 유압 손실에 따른 탈착걸쇠장치의 안정성 확보를 위한 관리 기준치를 구조해석을 통하여 제안하고자 하였다. 구조해석은 MIDAS와 I-DEAS로 진행하였으며, 펌프유압 손실에 따른 탈착걸쇠장치의 탈착링크에 응력이 집중되는 것을 확인하였다. 관리 기준치 제안을 위하여 탈착링크에 작용하는 전단력과 축방향력을 증가시켜가며 구조해석을 진행하였다. 최종적으로 탈착걸쇠장치의 안전성 유지를 위한 최대 전단력과 축방향력을 제시하였다.
임재수 ( Lim Jae-soo ),방건혁 ( Bang Geon-hyeok ),허광희 ( Heo Gwang-hee ),김충길 ( Kim Chung-gil ),박채린 ( Park Chae-rin ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 논문에서는 펌프식 수문의 펌프 유압 손실에 따른 탈착걸쇠장치의 안정성 확보를 위한 관리 기준치를 구조해석을 통하여 제안하고자 하였다. 구조해석은 MIDAS와 I-DEAS로 진행하였으며, 펌프유압 손실에 따른 탈착걸쇠장치의 탈착링크에 응력이 집중되는 것을 확인하였다. 관리 기준치 제안을 위하여 탈착링크에 작용하는 전단력과 축방향력을 증가시켜가며 구조해석을 진행하였다. 최종적으로 탈착걸쇠장치의 안전성 유지를 위한 최대 전단력과 축방향력을 제시하였다.
임재수 ( Lim Jae-soo ),방건혁 ( Bang Geon-hyeok ),허광희 ( Heo Gwang-hee ),김충길 ( Kim Chung-gil ),박채린 ( Park Chae-rin ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 논문에서는 펌프식 수문의 펌프 유압 손실에 따른 탈착걸쇠장치의 안정성 확보를 위한 관리 기준치를 구조해석을 통하여 제안하고자 하였다. 구조해석은 MIDAS와 I-DEAS로 진행하였으며, 펌프유압 손실에 따른 탈착걸쇠장치의 탈착링크에 응력이 집중되는 것을 확인하였다. 관리 기준치 제안을 위하여 탈착링크에 작용하는 전단력과 축방향력을 증가시켜가며 구조해석을 진행하였다. 최종적으로 탈착걸쇠장치의 안전성 유지를 위한 최대 전단력과 축방향력을 제시하였다.
임재수 ( Lim Jae-soo ),방건혁 ( Bang Geon-hyeok ),허광희 ( Heo Gwang-hee ),김충길 ( Kim Chung-gil ),박채린 ( Park Chae-rin ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 논문에서는 펌프식 수문의 펌프 유압 손실에 따른 탈착걸쇠장치의 안정성 확보를 위한 관리 기준치를 구조해석을 통하여 제안하고자 하였다. 구조해석은 MIDAS와 I-DEAS로 진행하였으며, 펌프유압 손실에 따른 탈착걸쇠장치의 탈착링크에 응력이 집중되는 것을 확인하였다. 관리 기준치 제안을 위하여 탈착링크에 작용하는 전단력과 축방향력을 증가시켜가며 구조해석을 진행하였다. 최종적으로 탈착걸쇠장치의 안전성 유지를 위한 최대 전단력과 축방향력을 제시하였다.
허광희 ( Heo Gwanghee ),김충길 ( Kim Chunggil ),방건혁 ( Bang Geonhyeok ),이진옥 ( Lee Chinok ),박채린 ( Park Chaerin ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.2
In this paper, a hydraulic damper was developed to protect the storage racks from earthquakes and the seismic performance of the storage racks was improved by applying the developed damper. In order to achieve these goals, the control capacity for the safety of the storage racks was determined, and a hydraulic damper satisfying the control capacity was designed and manufactured. In addition, the location of the hydraulic damper was determined through simulation. Finally, the shaking table test was carried out. As a result, the seismic performance improvement of the storage racks using the hydraulic damper was confirmed.
통계적 패턴 인식 기술을 이용한 교량의 실시간 손상평가 기술 개발
허광희 ( Heo Gwanghee ),김충길 ( Kim Chunggil ),방건혁 ( Bang Geonhyeok ),김용석 ( Kim Yongsuk ),고병찬 ( Ko Byeongchan ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.2
In this paper, real-time damage assessment technology was developed for detection the damage of bridges in real time and the performance of the developed technology was verified by vibration test. Real-time damage assessment technology was developed by combining statistical pattern recognition technology and simulation technology. In order to verify the developed technology, the earthquake response acquisition experiment was conducted according to the cable damage of the model cable-stayed bridge. As a result, it was confirmed that the developed real-time damage assessment technology can provide information on the location of damaged cable.