http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
난류 유동일때 관과 channel에서 고분자와 계면활성제에 의한 마찰저항 감소에 관한 연구
박성룡,Park, S.-R. 대한설비공학회 1995 설비공학 논문집 Vol.7 No.3
The drag reduction phenomenon with an additives of surfactant(STAC, stearlytrimethyl ammonium chloride) and polymer(PEO, polyethlene oxide) was investigated in fully developed turbulent pipe and channel flows at various low Reynolds numbers as well as very low additives concentration. A maximum of 70% drag reduction compared with plain water flow was found. This maximum drag reduction percentage obtained with surfactant solution was slightly higher than that of the Virk's asymptote in polymer solution.
박성룡,윤형기,Park, S.R.,Yoon, H.K. 대한설비공학회 1996 설비공학 논문집 Vol.8 No.4
A 2D-LDV system was employed to investigate the flow field characteristics in fully developed drag reducing turbulent channel flows. The additive used in this study was Habon-G which showed splendid drag reduction effect and minimum mechanical degradation trend in the closed flow circulation loop. In order to have better understanding of the drag reduction mechanism, the instantaneous velocities were carefully measured under various experimental conditions and the flow characteristics including time-averaged velocity, turbulent intensity and Reynolds shear stresses were carefully assessed. The time-averaged velocity profiles of surfactant flows showed more parabolic shape(typically shown in a laminar flow) together with significant suppression of turbulent production, yielding the shear induced micelle structure orienting in the flow direction due to its isotropic characteristics. Especially it was observed that the maximum intensity for drag reducing flows was shifted away from the wall and that the streamwise and normal turbulent intensities were strongly altered. This phenomenon strongly suggests that the viscous sublayer becomes thicker with addition of surfactant. Turbulent momentum transport was drastically suppressed across the whole drag reducing channel flow.
Pilot규모에서 계면활성제용액의 장기 마찰저항감소에 관한 연구
박성룡,이상남,문승현,윤형기,Park, S.R.,Lee, S.N.,Moon, S.H.,Yoon, H.K. 대한설비공학회 1997 설비공학 논문집 Vol.9 No.3
The long term drag reduction characteristics of Habon-G solution were investigated in the KIER pilot-scaled district heating simulation system. Test runs were implemented for 30 days without interruption. Pressure drop, flow rate and power consumption of surfactant (Habon-G) solution were regularly observed and compared with those of plain water. The experimental results suggest that the surfactant can be effectively applied to the DH transmission system for considerably long period wthout significant loss of its drag reduction capability even though the concentration of the additive may gradually decrease in the first stage of the experiment because of absorption.
난류 관유동에서 마찰저항감소 첨가제에 대한 펌프와 온도의 영향
박성룡,서항석,윤형기,Park, S.R.,Suh, H.S.,Yoon, H.K. 대한설비공학회 1996 설비공학 논문집 Vol.8 No.3
The effects of pump and temperature on drag reducing characteristics were investigated with a polymer(PAAM : Polyacrylamide) and three kinds of surfactants(CTAC, STAC, Habon-G) in fully developed turbulent pipe flows with various experimental parameters such as additive concentration(30~500ppm), pipe diameter(4.65mm, 10.85mm), Reynolds number($4{\times}10^4{\sim}10^5$) and working fluid temperature($20{\sim}80^{\circ}C$). The pump effect on PAAM was severe such that the drag reduction rates obtained with pump were decreased upto 30% as compared with those obtained with compressed air in 4.65mm test section. The temperature effect on PAAM was noticeably considerable, that is, the higher temperaute, the less drag reduction rate. On the other hand, no significant pump effect on the surfactants was observed. The drag reducing effectiveness of CTAC was totally lost in the temperature ragne of 60 to $80^{\circ}C$, whereas STAC and Habon-G kept their distinct drag reducing capability at a temperature of $80^{\circ}C$. This study clearly elucidated that for DHC application of drag reducing additives, the pump and temperature effects as well as additive concentration and pipe diameter should be carefully taken into consideration.
제품 환경에서의 EDMS(Electronic document management system) 구축을 위한 UI설계의 사용성 평가에 관한 연구
박성룡 ( Seongp Yong Park ),장광집 ( Kwang Chib Chang ) 한국기초조형학회 2013 기초조형학연구 Vol.14 No.4
최근의 유비쿼터스(ubiquitous) 환경은 각종 제품들과 현대인의 필수품인 스마트 폰 과의 네 트워크 서비스 체제로 전환되면서 급속하게 확대 되고 있으며, 이를 위한 다양한 어플리케 이션(application)이 제공되고 있다. 그러나 현실적으로는 이런 인터페이스 제품들이 사용자 측면의 인지적 요소나 상호 연동되는 제품의 속성 및 특성이 제대로 반영되지 않은 채 개발 되어져 사용자들로부터 외면을 당하는 사례들을 접할 수 있다. 심지어 사용자의 부주의로 인한 기기의 오작동으로 심대한 사고 등을 초래할 수 있는 위험성까지 내포하고 있다. 이런 문제들을 최소화하기 위하여 본 연구는 EDMS 환경을 중심으로 하는 제품군 중에서 도 차량정보를 기반으로 스마트폰과 연동하여 운전자에게 차량진단, IT콘텐츠 서비스, 에코 드라이빙 등의 서비스를 제공하는 보다 경쟁력 있는 어플리케이션 개발에 필요한 핵심요소를 찾아내기 위해 사용 성 평가를 수행하는데 중점을 두었다. 진행과정은 먼저, UI 제작에 필요한 디자인 요소로서 리소스를 추출하였으며, 이를 바탕으로 제작된 프로토타입 (prototype)의 어플리케이션을 이미 제작되어 상용화 되어있는 국외 제품과 함께 선호도 조 사를 실시하였다. 그리고 피험자들의 인지반응 실험을 통하여 이들의 인지속도, 오류횟수 및 시간 등의 결과 값을 도출하고 이를 비교분석 하였다. 실험 결과 인지시간과 오류 정도 는 안정성과 정확성 있는 어플리케이션을 구현하는데 가장 큰 요소로 작용한다는 것을 알 수 있었다. 그리고 인지속도는 사용자가 원하는 기능을 디스플레이 상에서 스트레스 없이 사용하게 되었을 때 빨라지며, 이는 복잡한 기능을 사용 할 때 더욱 효과적인 결과를 보여 주었다. 아울러 사용자가 쉽게 이해 할 수 있는 화면 구성과 다양한 기능의 인지를 위해서 는 통일성과 일관성 있는 인지요소가 필요하다는 점을 들 수 있었다. 또한 상용화된 두 개 의 제품보다 프로토타입 어플리케이션의 인지반응 속도가 빠르게 나타나고 오류횟수와 시 간을 줄일 수 있었던 이유는 단순한 기능부터 복잡한 기능까지 사용자가 스스로 관계 지어 생각 할 수 있는 화면구성이 제공되게 설계되었기 때문인 것으로 분석되었다. The study has focused on evaluating the usability to the prototype application for EDMS (Electronic document management system) through ``Preference test``, ``Cognitive Reflection Test``. Nowadays ``EDMS`` is being expanded to the products coupled with ``Smart Phone`` for making ``Ubiquitous Environments``. However it has still problems like inconvenient interface and user-malfunctioning. Therefore for minimizing those problems the study has been proceeded in stages as at first performing the pre-scanning step and resource-extracting to collect design factors and develop the prototype application, and next carrying out ``Preference test``, ``Cognitive Reflection Test`` for the comparison analysis with two commercialized overseas applications. As a result, the study has found out that recognition response times and error degrees take possession of the most important factors in realizing application-program with stability and accuracy, and also that cognitive elements with unity and consistency are required for users to recognize various functions and understand display-configurations easily.