http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
$Cd_{1-x}Zn_{x}S$ 박막의 성장과 광전도 특성
이상열,홍광준,유상하,신용진,이관교,서상석,김혜숙,윤은희,김승욱,박향숙,신영진,정태수,신현길,김태성,문종대,이충일,전승룡,Lee, S.Y.,Hong, K.J.,You, S.H.,Shin, Y.J.,Lee, K.K.,Suh, S.S.,Kim, H.S.,Yun, E.H.,Kim, S.U.,Park, H.S.,Shin, Y.J.,Jeong, T.S.,Shin, 한국센서학회 1995 센서학회지 Vol.4 No.3
Chemical bath deposition(C.B.D.)방법으로 다결정 $Cd_{1-x}Zn_{x}S$ 박막을 스라이드 유리(coming-2948) 기판위에 성장시켜 열처리하고 X-선 회절무늬를 측정하여 결정구조를 밝혔다. $550^{\circ}C$로 $N_{2}$ 속에서 열처리한 시료의 X-선 회절무늬로부터 외삽법으로 구한 격자상수는 CdS인 경우 $a_{0}\;=\;4.1364{\AA}$, $c_{0}\;=\;6.7129{\AA}$였으며 ZnS인 경우는 $a_{0}\;=\;3.8062{\AA}$, $c_{0}\;=\;6.2681{\AA}$였다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도 의존성을 연구하였다. 광전도 셀의 특성으로 스펙트럼응답 감도, 최대허용소비전력 및 응답시간을 측정하였다. Polycrystalline $Cd_{1-x}Zn_{x}S$ thin film were grown on slide glass(corning-2948) substrate using a chemical bath deposition (C.B.D) method. They were annealed at various temperature and X -ray diffraction patterns were measured by X-ray diffractometor in order to study $Cd_{1-x}Zn_{x}S$ polycrystal structure using extrapolation method of X-ray diffraction patterns for the CdS, ZnS sample annealed in $N_{2}$ gas at $550^{\circ}C$. It was found hexagonal structure which had the lattice constant $a_{0}\;=\;4.1364{\AA}$, $c_{0}\;=\;6.7129{\AA}$ in CdS and $a_{0}\;=\;3.8062{\AA}$, $c_{0}\;=\;6.2681{\AA}$ in ZnS, respectively. Hall effect on these sample was measured by Van der Pauw method and then studied on carrier density and mobility depending on temperature. We measured also spectral response, sensitivity maximum allowable power dissipation and response time on these sample.
김태성(T.S. Kim),홍종승(J.S. Hong),양민양(M.Y. Yang),이응석(E.S. Lee) 한국생산제조학회 2011 한국생산제조시스템학회 학술발표대회 논문집 Vol.2011 No.4
5㎿급의 풍력발전기에 소요되는 Blade의 가공과 선박용 대형 Propeller, 대형 LCD Panel의 가공 및 항공기 부품 등 대형 5축가공을 필요로 하는 제품을 가공하기 위한 대형5축가공기가 필요하지만 국내에서 생산되고 있지 않아 전량 외국에서 수입하여 사용하고 있는 실정이므로 수입대체는 물론 대형공작기계의 제작능력을 보유하고자 2축 선회 Head를 갖는 30m 길이 “대형복합형상가공용 Gantry형 5축 가공기”를 개발하고자 한다.
김태성(T. S. Kim),정진욱(J. W. Jung),김용희(Y. H. Kiln),박근우(K. W. Park),이민기(M. K. Lee) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.11
This paper presents the calibration for the parallel typed tilting table. The calibration system needs only simple sensing device which is a digital indicator to measure the orientation of a table. The calibration algorithm is developed by a measurement operator. It eliminates the concern about the poor parameter observability due to a large number of parameters of parallel-mechanism. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters is examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a Parallel-typed Tilting Table and all the necessary kinematic parameters arc identifiable.
영전압 스위칭 풀 브릿지 토폴로지를 기반으로 한 새로운 단일 전력 단 역률개선 AC/DC 컨버터
김태성(T.S.Kim),구관본(G.B.Koo),문건우(G.W.Moon),윤명중(M.J.Youn) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(1)
A new single stage power factor correction(PFC) AC/DC converter based on zero voltage switching(ZVS) fun bridge topology is proposed, Since the series-connected two transformers act as both output inductor and main transformer by turns, the proposed converter has a wide ZVS range without additional devices for ZVS, Furthermore, since there is no need to use an output inductor, the proposed converter features high power density, The proposed converter gives the good power factor correction and low line current harmonics distortion, A mode analysis and experiment results are presented to verify the validity of the proposed converter