http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김상용,박수홍,박지연,Kim, Sang-Young,Park, Soo-Hong,Park, Jee-Yeun 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.2
선박이나 해양구조물의 해양에서의 위치를 고정하고자 할 경우에 적용되는 자동 윈치 제어 시스템을 개발하였다. 본 논문에서는 윈치제어목적을 위하여 제어유닛의 설계하고 개발하였다. 개발된 결과는 한강 인공섬에 적용하여 개발내용의 유용성을 보여주었다. We develpoed auto winch control which will be applied when we want to fix ship or marine structure in the ocean. In this paper, an effort has been made to design and develop a control unit for Winch control purpose. Developed result shows usefulness when it is applied to Han-river floating island.
가소제가 Polyvinylidenefluoride와 Poly(Vinylidenefluoride-Trifluoroethylene)의 압전성에 미치는 영향
김상용,유종훈,조재환,Kim, Sang-Yong,Yu, Jong-Hun,Jo, Jae-Hwan 한국섬유공학회 1988 한국섬유공학회지 Vol.25 No.3
The effects of plasticizer of on the dynamic mechanical and piezoelectric properties of PVDF and P (VDF-TrFE) films were investigated and their measurements were compared with each other. The addition of plasticizer (tricresyl phosphate) lowered the glass transition temperature of both PVDF and P (VDF-TrEF) films and decreased their moduli. The plasticizer did not affect the crystallinities of PVDF and annealed P(VDF-TrFE), but lowered the crystallinity of unannealed P(VDF-TrFE) significantly. Piezoelectric stress constants (e31) of PVDF and annealed P(VDF-TrFE) increased with the increase in plasticizer content while e31 of unannealed P(VDF-TrFE) decreased because the contribution of the crystallinity decrease was larger than that of plasticizer which made dipole reorientation easier.
WDM네트웍을 위한 광 귀환에 의해 이득이 고정된 EDFA의 귀환 파장에 따른 특성
김상용,정준,채창준,이병호,Kim, Sang-Yong,Chung, Joon,Chae, Cahgn-Joon,Lee, Byoung-Ho 한국광학회 1997 한국광학회지 Vol.8 No.3
광 귀환에 의해 이득이 고정된, 980 nm 펌프 EDFA의 귀환 파장에 따른 특성을 비교하였다. 귀환 파장으로 1532, 1543, 1565 nm의 세가지 파장을 선택하였으며, 각각의 경우에 대해 2.5 Gbps * 8채널, WDM시스템을 구성하여, 입력 신호광의 세기에 따른 이득의 변화, 상호 포화에 의한 신호광의 동 특성, relaxation oscillation에 의한 power penalty, 입력 신호광의 세기에 따른 잡음지수의 변화를 측정하여 비교하였다. We compare feedback wavelength-dependent performances of all-optical gain-clamped 980-nm pumped erbium-doped fiber amplifiers. In a 2.5-Gbps 8-channel WDM system, we have measured and compared gain compressions, signal power variations due to cross-saturation, power penalties caused by relaxation oscillations and noise figures for three different feedback wavelengths - 1532, 1543, and 1565 nm.
섬유 건조 공정에 있어서 에너지 절약 -건조 온도와 직불두께가 건조시간에 미치는 영향-
김상용,고석원,김경백,Kim, Sang-Yong,Go, Seok-Won,Kim, Gyeong-Baek 한국섬유공학회 1983 한국섬유공학회지 Vol.20 No.4
The effect of drying temperature and fabric thickness on the drying time was studied on the basis of expermental results. The variations in the amount of free water in the cotton fabric were measured in the drying oven which was maintained at a constant temperature. Mass of free water was measured at various squeezing pressures, drying temperatures, and fabric thicknesses. The theoretical drying time is well coincident with the experimental drying time. Initial moisture regain does not affect the drying rate of cotton fabric when drying temperature is constant. The drying rate of constant drying rate process is proportional to the temperature of air from 85$^{\circ}C$ to 1$25^{\circ}C$. The increase of thickness of fabric does not affect the drying rate of constant drying rate process but makes the critical moisture regain increase. 본 연구는 섬유 공업에 소모되는 에너지의 대부분을 차지하는 건조공정에 대한 연구이며 그 중 특히 건조온도와 직물두께가 건조시간에 미치는 영향에 대해 살펴 보았다. 시료는 잘 정련된 두께 0.343, 0.686 그리고 1.029mm의 면직물을 사용하였으며 각 두께에서 건조온도를 85$^{\circ}C$에서 1$25^{\circ}C$까지 1$0^{\circ}C$씩 변화시키며 실험하였다. 시료의 크기는 22$\times$22($\textrm{cm}^2$)로 하고 각 온도에서 압착 압력을 0.5, 1.0, 1.5, 2.0 그리고 2.5kg/$\textrm{cm}^2$의 5가지로 변화시켜 무게에 따른 건조시간을 측정하였다. 실험 결과로부터 압착압력은 건조온도가 일정할 때 일정건조속도에 영향을 미치지 못하며 일정건조속도는 건조온도($^{\circ}C$)와 일정한 함수관계를 나타내며 직물두께의 증가는 일정건조속도에 변화를 일으키지 않지만 임계점을 수분율이 큰쪽으로 이동시켜 효과적인 건조를 방해함을 알았다. 또한 임계점에서의 수분율은 직물두께의 0.16승에 비계하는 것을 알았다. 본 연구를 통해 초기와 최후의 요망 수분율이 결정되면 각 직물에 따라 효율적인 건조조건의 예측이 가능하다는 것을 알 수 있었다.
김상용,Kim, S. 한국통계학회 2008 응용통계연구 Vol.21 No.4
본 논문은 재무 시계열 자료에서 흔히 나타나는 이상치를 처리하기 위하여 이중 로버스트 추정함수를 제시하였다. 이중 로버스트 추정 방정식의 해인 로버스트 추정치를 이용하여 ARCH모형과 GARCH 모형 하에서 이상치를 처리하였다. 또한 실제 주가자료를 응용하여 기존의 최소제곱추정치보다 로버스트 추정치나 이중 로버스트 추정치의 성능이 우수함을 보였다. In this paper, we propose the double robust estimators which are the solutions of the double robust estimating equations to analyze and treat the outliers in the stock market data in Korea including the IMF period. The feasibility study shows that the proposed estimators work quitely better than the least squares estimators and the conventional robust estimators.
Simplified Stress-Strain Relations of Multi-ply Cords
김상용,정호규,조재환,Kim, Sang-Yong,Jeong, Ho-Gyu,Jo, Jae-Hwan The Korean Fiber Society 1986 한국섬유공학회지 Vol.23 No.5
Simplified tensile stress-strain relation of textile cords was derived and discussed with Riding's experimental results. Theoretical equations for two-, three-and seven-ply cords are developed under the consideration of different geometrical packing. The tensile stress-strain relation of cord is expressed in terms of "Cord Factor." As cord twist and cord strain increase, the deviation between theoretical and experimental values increases for the two and three-ply cords. In case of seven-ply cord, the agreement between the calculated and experimental is very good compared with the other two cord structures.