http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
천연(天然) Zeolite를 이용(利用)한 중금속(重金屬) 흡착제(吸着劑)의 개발(開發)
김성수,박만,허남호,최정,Kim, S.S.,Park, M.,Hur, N.H.,Choi, J. 한국환경농학회 1991 한국환경농학회지 Vol.10 No.1
국내산(國內産) 천연(天然) Zeolite를 이용(利用)하여 저렴(低廉)한 중금속흡착제(重金屬吸着劑)의 개발(開發)을 위해 이온 교환용량(交換容量)이 큰 Zeolite를 합성(合成)하고 이것의 중금속(重金屬) 흡착능력(吸着能力)을 조사(調査)하였다. 천연(天然) Zeolite의 주(主) 구성(構成) 점토광물(粘土鑛物)은 Clinoptilolite와 Mordenite였으나 합성(合成) Zeolite는 Phillipsite였다. 시료(試料)에 의(依)한 Cu와 Zn의 흡착반응(吸着反應)은 1시간(時間) 이후(以後)에 흡착평형(吸着平衡)에 도달(到達)하였다. 흡착량(吸着量)은 시료량(試料量) 및 첨가중금속(添加重金屬) 이온들의 농도(濃度)가 증가(增加)할수록 증가(增加)하는 경향(傾向)이었으며 합성(合成) Zeolite가 천연(天然) Zeolite에 비(比)해 고농도(高濃度)에서 흡착율(吸着率)이 높았다. 중김속(重金屬) 흡착량(吸着量)은 pH가 증가(增加)할수록 증가(增加)하는 경향(傾向)이었으나 합성(合成) Zeolite가 천연(天然) Zeolite에 비(比)해 pH 생존성(生存性)이 낮았다. 중금속(重金屬) 흡착량(吸着量)은 천연(天然) Zeolite에 비(比)하여 합성(合成) Zeolite가 훨씬 높았다. 염용액(鹽溶液)의 농도(濃度)가 높을수록 많은 양(量)의 중금속(重金屬) 이온이 합성(合成) Zeolite에서 탈착(脫着)되었으며 그 정도(程度)는 NaCl<$CaCl_2$<$AlCl_3$의 순(順)이었다. 따라서 합성(合成) Zeolite보다 중금속(重金屬) 제거효과(除去效果)가 우수(優秀)한 것으로 판단(判斷)된다. This study was carried out to develop the low-priced adsorbent by synthesizing the zeolite of high CEC with the natural zeolite and examining the ability of this zeolite to adsorb heavy metals. The dominant clay minerals were clinoptilolite and mordenite in natural zeolite, while phillipsite in the synthesized zeolite. Adsorption reaction of Cu and Zn on clays were reached to equilibrium after 1 hr. The amount of adsorption was increased as the concentrations of heavy metals or the initial pH of suspension was increased. The synthesized zeolite adsorbed heavy metals about twice as much as the natural zeolite. The adsorption of heavy metals on the synthesized zeolite was less affected by the initial pH of suspension than that on natural zeolite. At cumulative adsorption, the synthesized zeolite adsorbed much more heavy metals at early three treatments than the natural zeolite did. The amount of desorption by chloride salts was increased as the concentration of chloride salts was increased. The ability of salt to desorb was in the order of NaCl>$CaC1_2$>$AlC1_3$. It is estimated that the ability of the synthesized zeolite to remove heavy metals was better than that of the natural zeolite.
디지털 오일필드에서 빅데이터 분석기반 IT 융합 기술 동향
김성수,손지연,박준희,Kim, S.S.,Son, J.Y.,Park, J.H. 한국전자통신연구원 2013 전자통신동향분석 Vol.28 No.4
세계적으로 에너지 요구량이 날로 증가함에 따라, 새로운 오일과 가스에 대한 탐사, 개발 및 생산에 필요한 기술들이 도전적인 과제로 부상하고 있다. 반면, 오일과 가스 분야와 관련된 규제는 더욱 강화되고 있어 기존의 경험이 많은 인력에 의존하는 방식만으로 문제를 해결하기는 쉽지 않다. 따라서, 주요 오일 및 가스 메이저 업체들은 IT를 기존 업무 프로세스와 연계하여 오일 탐사시간 단축, 생산성 향상 및 높은 수준의 안전성을 제공할 수 있는 디지털 오일필드(Digital Oil Field) 구축을 위한 통합운영(IO: Integrated Operations) 시스템을 활용해 나가고 있다. 특히, 최근 오일 및 가스 산업 프로세스의 데이터 집약적인 특성을 반영하여 빅데이터 분석기반의 IT 융합 기술을 적극적으로 도입을 시도하고 있다. 따라서 본고는 디지털 오일필드의 요소 기술과 빅데이터 분석기반 IT 융합 기술 동향에 대해서 살펴본다.
원심압축기 임펠러의 효율최적화를 위한 반익 유동에 대한 수치연구
김성수(S. S. Kim),왕학민(H. M. Wang),노태현(T. H. Noh),김성수(S. S Kim),장세명(S. M. Chang) 한국전산유체공학회 2012 한국전산유체공학회 학술대회논문집 Vol.2012 No.11
A splitter-blade is optimized for the efficiency to determine the location of a system of impeller for the centrifugal compressor using CFD technique. The splitter-blade formed the steady flow at the exit of impeller as well as the dividing flow of the full-blade system. The cross-sectional area of the flow depending on the starting position and angle should be set between full-blade and splitter-blade. Changing the cross-sectional area divided by the splitter-blade, we can stabilize the dominant part of exit flow. Therefore, in this study, the parameters of the starting position and angle effect on determining the optimized efficiency of splitter-blade of impeller system. CFD is shown to be very helpful for this procedure of design.
김성수(S. S. Kim),김순호(S. H. Kim) 한국동력기계공학회 2007 한국동력기계공학회 학술대회 논문집 Vol.- No.-
제 2세대 직접분사식 가솔련 기관에서 6공 연료분사기의 연료분무특성을 관찰하였다. 실험에 사용한 직접분사식 가솔린 기관은 2개의 흡입밸브와 2개의 배기밸브를 갖는 텀블형 Spray Guided 연소설과 Quartz로 제작된 실린더 라이너와 실린더 헤드 창으로 구성되어 있다. 선회유동을 유도하기 위하여 흡입매니폴드에 선회유동 제어밸브를 부착하였다. 2차원 Mie 스캐터링 기법을 이용하여 연료분사시기, 연료분사압력과 실린더 내 유동 및 냉각수 온도가 연료분무에 미치는 영향을 관찰하였다. 실험결과로는 흡기과정동안 흡기 선회유동은 분사된 연료의 공간적 분포에 크게 작용하였고, 압축과정동안에는 텀블 및 선회유동의 영향이 흡기과정에 비해 크지 않음을 확인하였다. 또한 성층연소를 위해서 압축과정에서 연료를 분사하는 경우 고압의 연료분사압은 분무도달거리의 성장을 촉진시키나 상승하는 피스톤과 이로 인한 실린더 압력의 상승으로 분무도달거리의 성장이 억제됨을 확인할 수 있었다.
김성수(S.S. Kim),박기태(G.T. Park),정한식(H.S. Chung),최희규(H.K. Choi) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
A simulation of the three-dimensional motion of grinding media in the stirred media mill for the research of grinding mechanism has been carried out by 3-dimensional Discrete Element Method (DEM). The power for the change of rotation speed of stirrer was examined based on the micro interactive forces at all the contact points between balls and between ball and stirrer. The results of DEM was compared with experimental measurements of power and showed similar power variation and force distribution which act on the stirrers of the mill. It could be also confirmed that DEM is a very powerful tool for the microanalysis of movement of balls, which has not been solved by conventional experimental method and for calculation of power of some mills which use balls as grinding media.