Vertical Migration of Sound Scatterers in the Southern Yellow Sea in Summer

Lu, Lian-Gang,Liu, Jianjun,Yu, Fei,Wu, Wei,Yang, Xiaodong The Korean Society of Oceanography 2007 Ocean science journal Vol.42 No.1

Acoustic volume backscattering strength data were collected and Conductivity Temperature Depth (CTD) measurements were conducted in the southern Yellow Sea in summer 2005 and 2006. The high temporal and vertical resolution acoustic data measured with a 307 kHz Acoustic Doppler Current Profiler (ADCP) and a 250 kHz acoustic Doppler profile (ADP) had dominant diel variation, which resulted from vertical migration of sound scatterers. Some scatterers congregating in the bottom layer in the daytime migrated upward at dusk, and migrated downward into the bottom layer at dawn. The migration speeds were estimated. More than 33 days data show that the diel migration varies with time. The feature of migration measured with ADCP and ADP is consistent to some extent with what is described in the study on vertical migration of zooplankton in the southern Yellow Sea with conventional net samples.

Characteristics and Comparisons of Morphometric Measurements and Computed Tomography Hounsfield Unit Values of C2 Laminae for Translaminar Screw Placement Between Patients With and Without Basilar Invagination

Lu-Ping Zhou,Jin Shang,Zhi-Gang Zhang,Zhen-Fei Jiang,Hua-Qing Zhang,Chong-Yu Jia,Ren-Jie Zhang,Cai-Liang Shen 대한척추신경외과학회 2022 Neurospine Vol.19 No.4

Objective: Patients with basilar invagination (BI) had high incidences of vertebral variations and high-riding vertebral artery (HRVA) that might restrict the use of pedicle or pars screw and increase the use of translaminar screw on axis. Here, we conducted a radiographic study to investigate the feasibility of translaminar screws and the bone quality of C2 laminae in patients with BI, which were compared with those without BI as control to provide guidelines for safe placement. Methods: In this study, a total of 410 patients (205 consecutive patients with BI and 205 matched patients without BI) and 820 unilateral laminae of the axis were included at a 1:1 ratio. Comparisons with regard to insertion parameters (laminar length, thickness, angle, and height) for C2 translaminar screw placement and Hounsfield unit (HU) values for the assessment of the appropriate bone mineral density of C2 laminae between BI and control groups were performed. Besides, the subgroup analyses based on the Goel A and B classification of BI, HRVA, atlas occipitalization, and C2/3 assimilation were also carried out. Furthermore, the factors that might affect the insertion parameters and HU values were explored through multiple linear regression analyses. Results: The BI group showed a significantly smaller laminar length, thickness, height, and HU value than the control group, whereas no significant difference was observed regarding the laminar angle. By contrast, the control group showed significantly higher rates of acceptability for unilateral and bilateral translaminar screw fixations than the BI group. Subgroup analyses showed that the classification of Goel A and B, HRVA, atlas occipitalization, and C2/3 assimilation affected the insertion parameters except the HU values. Multiple linear regression indicated that the laminar length was significantly associated with the male gender (B = 0.190, p < 0.001), diagnoses of HRVA (B = -0.109, p < 0.001), Goel A (B = -0.167, p < 0.001), and C2/3 assimilation (B = -0.079, p = 0.029); the laminar thickness was significantly associated with the male gender (B = 0.353, p < 0.001), diagnoses of HRVA (B = -0.430, p < 0.001), Goel B (B = -0.249, p = 0.026), and distance from the top of odontoid to the Chamberlain line (B = -0.025, p = 0.003); laminar HU values were significantly associated with age (B = -2.517, p < 0.001), Goel A (B = -44.205, p < 0.001), Goel B (B = -25.704, p = 0.014), and laminar thickness (B = -11.706, p = 0.001). Conclusion: Patients with BI had narrower and smaller laminae with lower HU values and lower unilateral and bilateral acceptability for translaminar screws than patients without BI. Preoperative 3-dimensional computed tomography (CT) and CT angiography were needed for BI patients.

Direct Observation of Radiative Flux in the Southern Yellow Sea

Lu, Lian-Gang,Yu, Fei,Diao, Xinyuan,Guo, Jingsong,Wang, Huiwu,Wei, Chuanjie The Korean Society of Oceanography 2008 Ocean science journal Vol.43 No.2

Direct measurements of four radiative components at air-sea boundary layer were conducted in the southern Yellow Sea during three cruises (seasons) in 2007. Simultaneous observations of meteorological (cloud cover, air temperature and humidity) and oceanographic (sea surface temperature) parameters were carried out. Observational results of radiative fluxes and meteorological and oceanographic parameters are presented. Mean diurnal cycles of four radiative components, net radiation, and sea surface albedo are calculated to achieve averages in different seasons. Net radiative fluxes in three seasons (winter, spring, autumn) are 8, 146, $60\;W/m^2$, respectively. Comparisons between the observed radiative fluxes and those estimated with formulas are taken.

Effect of single-pulse laser irradiation energy on healing fatigue damage for copper film

Chong-Gang Ren,De-Guang Shang,Lu Wang,Yu-Bo Guo 대한기계학회 2014 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.28 No.4

In this study, the optimum laser process parameter was determined by fatigue experiment for the treated copper film specimens withthickness of 25 μm. The mechanism of healing fatigue damage was analyzed by the numerical simulation of temperature field induced bylaser irradiation and the microstructure changes on the surface of specimens. The results showed that the fatigue damage of copper filmspecimens can be healed when the applied energy density is in the range from 4×10³J/m² to14×10³ J/m², and the fatigue life can increaseby about 5 times when the applied energy density is 7×10³ J/m². The process hardening and grain refinement in the surface layer aremainly responsible for extending fatigue life.

PD-L1 inhibits acute and chronic pain by suppressing nociceptive neuron activity via PD-1

Chen, Gang,Kim, Yong Ho,Li, Hui,Luo, Hao,Liu, Da-Lu,Zhang, Zhi-Jun,Lay, Mark,Chang, Wonseok,Zhang, Yu-Qiu,Ji, Ru-Rong NATURE AMERICA 2017 NATURE NEUROSCIENCE Vol.20 No.7

<P>Programmed cell death ligand-1 (PD-L1) is typically produced by cancer cells and suppresses immunity through the receptor PD-1 expressed on T cells. However, the role of PD-L1 and PD-1 in regulating pain and neuronal function is unclear. Here we report that both melanoma and normal neural tissues including dorsal root ganglion (DRG) produce PD-L1 that can potently inhibit acute and chronic pain. Intraplantar injection of PD-L1 evoked analgesia in naive mice via PD-1, whereas PD-L1 neutralization or PD-1 blockade induced mechanical allodynia. Mice lacking Pd1 (Pdcd1) exhibited thermal and mechanical hypersensitivity. PD-1 activation in DRG nociceptive neurons by PD-L1 induced phosphorylation of the tyrosine phosphatase SHP-1, inhibited sodium channels and caused hyperpolarization through activation of TREK2 K+ channels. PD-L1 also potently suppressed nociceptive neuron excitability in human DRGs. Notably, blocking PD-L1 or PD-1 elicited spontaneous pain and allodynia in melanoma-bearing mice. Our findings identify a previously unrecognized role of PD-L1 as an endogenous pain inhibitor and a neuromodulator.</P>

Dynamics Modelling and Simulating of Ultra-precision Fly-Cutting Machine Tool

Hanjing Lu,Yuanyuan Ding,Yu Chang,Gangli Chen,Xiaoting Rui 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.21 No.2

Dynamics modelling and simulating are the significant process to improve the machining accuracy of the machine tool. This paper is aimed to model and simulate the ultra-precision fly-cutting machine tool (UFMT) and find the relations between structure parameters and machined surface. In this paper, the multi-rigid-flexible-body dynamics model of the UFMT is firstly built by using transfer matrix method for multibody systems. After deducing overall transfer equation, overall transfer matrix, eigenfrequency equation and dynamics equations, the vibration characteristics and dynamics response of tool-tip are simulated and validated by tests. The machined surface is simulated by transferring displacement between the fly-cutting tool-tip and the workpiece into 3D curve. According to the simulation results, both the air-bearing stiffness of the flying-cutting head and cutting process parameters have effects on the machined surface.

Preparation and Characterization of Electrospun Polyimide Microfibrous Mats with High Whiteness and High Thermal Stability from Organo-soluble Polyimides Containing Rigid-rod Moieties

Chen-yu Guo,Jin-gang Liu,Lu-meng Yin,Meng-ge Huangfu,Yan Zhang,Xiao Wu,Xiu-min Zhang 한국섬유공학회 2018 Fibers and polymers Vol.19 No.8

A series of flexible and tough polyimide (PI) microfibrous mats (PI-1~PI-4) have been prepared via the one-step electrospinning procedure with the organo-soluble PI resins as the starting materials. For this purpose, four PI resins were first synthesized by the chemical imidization reaction from 2,2'-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA) and four aromatic diamines containing rigid-rod moieties in their molecular skeletons, respectively. The PI resins derived from 6FDA and aromatic diamines, including PI-1 from 2-(4-aminophenyl)-5-aminobenzimidazole (APBI), PI-2 from 2-(4-aminophenyl)-5-aminobenzoxazole (APBO), PI-3 from 4,4′-diaminobenzanilide (DABA), and PI-4 from 2- chloro-4,4-diaminobenzanilide (Cl-DABA) exhibited good solubility in polar aprotic solvents, such as N-methyl-2- pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc). Flexible and tough microfibrous mats were successfully prepared by a one-step electrospinning procedure from the PI/DMAc solution (solid content: 15-20 wt%; absolute viscosity: 8000- 10000 mPa·s). The derived PI mats exhibited good whiteness according to the CIE Lab measurements with W (whiteness) values as high as 94.31, L (lightness) values higher than 94.00, b* (yellowness) values as low as 2.98 and yellow indices (YI) as low as 4.87. In addition, the prepared PI mats exhibited excellent thermal and dimensional stability with the glass transition temperatures (Tg) higher than 345 oC and linear coefficients of thermal expansion (CTE) as low as 27.8×10-6 /K.

Recognizing and Predicting the Non-Performing Loans of Commercial Banks

Zhang Yu,Guan Yongsheng,Yu Gang,Lu Haixia 보안공학연구지원센터 2016 International Journal of Signal Processing, Image Vol.9 No.11

As the reform and opening up going into depth over the past three decades and more, the market economic system has been gradually established. The banking industry grows steadily in the process of the reform. It supports economic development, reduces and defends many financial risks in the processof the reform. However, there are many kinds of risks inside of banks, one of which is that the non-performing loans (NPLs) ratio is too high. Therefore, people should focus on how to accurately classify the banking loans into performing and non-performing ones and how to control and prevent the resulting crisis. This paper deeply analyses China’s NPLs problem for the current period, recognizes and classifies loans types by adopting decision trees, Naïve Bayes and support vector machine (SVM) methods. The experiment result found that the decision trees method can well identify the performing loans and non-performing loans; its accuracy is as high as 94%.

Comparative Effectiveness of Risk-adapted Surveillance vs Retroperitoneal Lymph Node Dissection in Clinical Stage I Nonseminomatous Germ Cell Testicular Cancer: A Retrospective Follow-up Study of 81 Patients

Fan, Gang,Zhang, Lin,Yi, Lu,Jiang, Zhi-Qiang,Ke, Yang,Wang, Xiao-Shan,Xiong, Ying-Ying,Han, Wei-Qin,Zhou, Xiao,Liu, Chun,Yu, Xie Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.8

Purpose: To retrospective assess the potential predictors for relapse and create an effective clinical mode for surveillance after orchidectomy in clinical stage I non-seminomatous germ cell testicular tumors (CSI-NSGCTs). Materials and Methods: We analyzed data for CSI-NSGCTs patients with non-lymphatic vascular invasion, %ECa < 50% (percentage of embryonal carcinoma < 50%), and negative or declining tumor markers to their half-life following orchidectomy (defined as low-risk patients); these patients were recruited from four Chinese centers between January 1999 and October 2013. Patients were divided into active surveillance group and retroperitoneal lymph node dissection (RPLND) group according to different therapeutic methods after radical orchidectomy was performed. The disease-free survival rates (DFSR) and overall survival rates (OSR) of the two groups were compared by Kaplan-Meier analysis. Results: A total of 121 patients with CSI-NSGCT were collected from four centers, and 81 low-risk patients, including 54 with active surveillance and 27 with RPLND, were enrolled at last. The median follow-up duration was 66.2 (range 6-164) months in the RPLND group and 65.9 (range 8-179) months in the surveillance group. OSR was 100% in active surveillance and RPLND groups, and DFSR was 89.8% and 87.0%, respectively. No significant difference was observed between these two groups ($X_2=0.108$, P=0.743). No significant difference was observed between the patients with a low percentage of embryonal carcinoma (<50%) and those without embryonal carcinoma (87.0% and 91.9%, $X_2=0.154$, P=0.645). No treatment-related complications were observed in the active surveillance group whereas minor and major complications were observed in 13.0% and 26.1% of the RPLND group, respectively. Conclusions: Active surveillance resulted in similar DFSR and OSR compared with RPLND in our trial. Patients with low-risk CSI-NSGCTs could benefit from risk-adapted surveillance after these patients were subjected to radical orchidectomy.

Electrospun Polyphenylquinoxaline Ultrafine Non-woven Fibrous Membranes with Excellent Thermal and Alkaline Resistance: Preparation and Characterization

Chen-yu Guo,Lu-meng Yin,Jin-gang Liu,Xin-ke Wang,Na Zhang,Lin Qi,Yan Zhang,Xiao Wu,Xiu-min Zhang 한국섬유공학회 2019 Fibers and polymers Vol.20 No.12

A series of polyphenylquinoxaline (PPQ) ultrafine non-woven fibrous membranes have been first successfullyprepared via the electrospinning procedure with the soluble PPQ solutions as the starting materials. For this purpose, variousorgano-soluble PPQ resins were synthesized via the one-step high temperature polycondensation procedure from thearomatic ether-bridged bis(α-diketone) and bis(o-diamine) monomers. Flexible ether linkages and pendant bulky phenylsubstituents endowed the PPQ resins good solubility in polar aprotic solvents. The high-molecular-weight PPQ resins weredissolved in N-methyl-2-pyrrolidone (NMP) to afford the PPQ electrospinning solution except PPQ-Ia derived from 4,4'-oxydibenzil (ODB) and 3,3'-diaminobenzidine (DAB) due to the limited solubility in the solvent. All the derived PPQultrafine non-woven fibrous membranes maintained good structure integrity after hydrolysis aging either at room temperature(25 oC) for 72 h or at refluxing temperature (100 oC) for 24 h in an aqueous sodium hydroxide (NaOH) solution at a solidcontent of 20 wt%. Comparatively, the polyimide (PI) reference electrospun membrane (PI-ref) derived from 1,2,4,5-pyrromellitic anhydride (PMDA) and 4,4'-oxydianiline (ODA) lost its original structure only after boiling in the same NaOHsolution within 3 h. In addition, the developed PPQ ultrafine non-woven fibrous membranes exhibited good thermal stabilitywith the 5 % weight loss temperatures (T5%) higher than 555.0 oC in nitrogen and glass transition temperatures (Tg) in therange of 248.1-266.1 oC, respectively.