http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고밀집 섬유 집합체를 이용한 정적 액 - 액 추출 장치의 이론적 해석
김광욱,변기호,이일희,유재형,박현수 ( Kwang Wook Kim,Kee Hoh Byeon,Eil Hee Lee,Jae Hyung Yoo,Hyun Soo Park ) 한국공업화학회 1997 공업화학 Vol.8 No.3
본 연구에서는 고밀집 섬유체에 의한 정적 액-액 접촉기에 대한 이론적 모델링을 통하여 섬유체 접촉기 내부에서의 물질 이동과정과 각 상에서의 축 방향 농도분포 해석이 수행되었고, 여러 운전 조건하에서 출구 농도를 예측하여 실험치와 비교하였다. 본 섬유체 액-액 추출기는 그 구조적 특성 때문에 축 방향 분산이 없는 플러그 흐름 모델로 완벽하게 묘사될 수 있었으며 data fitting을 통해 결정되어 모델식에 적용된 물질전달 계수와 섬유체 추출기 축 방향 단위 길이 당 물질전달 면적의 곱의 항인 k_a^σ은 그 섬유체 추출기의 고유 특성 값으로 사용될 수 있었고, 그 값은 약 0.0327cm2/sec이었다. Mass transfer mechanism and concentration profiles in the axial direction at each phase were analyzed and simulated by a theoretical modeling on a liquid-liquid static contactor using highly packed fiber bundle. The concentrations at the end of the fiber extractor calculated at several operational conditions were compared with e~cperimental results. The fiber extractor could be completely predicted by a plug flow model without axial dispersion. A paramter used in the model equations, k_a^σ called the product of mass transfer coefficient and mass transfer area per unit length of the fiber extractor in the axial direction, which was determined by a curve-fitting, was confirmed to be a unique characteristic value of the fiber extractor, and was about 0.0327 cm2/sec.
고밀집 섬유 집합체에 의해 유도된 모세관 현상을 이용한 정적 액 - 액 접촉장치의 개발과 그 특성 연구
김광욱,변기호,이일희,유재형,박현수 ( Kwang Wook Kim,Kee Hoh Byeon,Eil Hee Lee,Jae Hyung Yoo,Hyun Soo Park ) 한국공업화학회 1996 공업화학 Vol.7 No.4
본 연구에서는 고밀집 섬유 다발체 내에 수용상과 유기상을 동시에 주입시켜 나타나는 모세관 현상을 이용하여 최소 공간에서 최대한의 물질 전달 면적을 갖게 한 정적 액-액 접촉 장치가 개발되었다. 이 장치의 특성과 안정성을 평가하기 위해 TBP와 우라닐 이온을 함유한 질산계의 연속 추출 실험이 수행되었으며, 추출 성능은 동일 상비 조건에서 수행된 회분식 성능과 동일하였다. 초기 수용액에 대한 추출 수율을 증가 시키기 위해서는 일정한 수용액 유속에서 유기상의 유속 증가가 필요하였고, 같은 상비 조건의 회분식의 추출수율을 갖기 위해서는 수용액이 장치 내에서 일정한 체류 시간을 유지해야함을 알 수 있었고 본 추출계에서는 약 1.9분이 필요함을 알 수 있었다. 본 연구에서 개발된 고 밀집 섬유체 접촉기는 안정성과 재현성이 뛰어 났으며, 일반 물질 분리용 뿐만 아니라, 액-액계면 넓고 안정되어 있어 용매 추출 속도론 해석에도 사용될 수 있음을 확인할 수 있었다. A new static contactor using capillary phenomena induced by a highly packed fiber bundle was developed for the solvent extraction. When two immiscible phases being cocurrently and forcedly fed into the packed fiber bundle, the contactor brings about a very large liquid-liquid contact area for mass transfer within a small definite space without any turbulence and drop phenomena. In order to test the characteristics and stability of the static contactor system, continuous extraction experiments of TBP-uranyl ion-nitric acid system were done and compared with the batch extraction experiment of the same chemical system. The performance of the static contactor were the same as that of the ideal batch extractor with the same extraction condition. For the increase of the extraction yield by the contactor, the increase of organic flow rate was required at a fixed aqueous flow rate, and a certain residence time of the aqueous phase flow within the contactor system had to be maintained to meet the performance of the batch system of the same phase ratio. The residence time in the case of TBP-uranyl ion-nitric acid system was about 1.9 minutes. This system was confirmed to be effective and stable enough for purposes of the kinetic study of solvent extraction as well as the mutual separation and purification of ordinary materials because of good reproducibility and the stable and large static liquid-liquid contact area.