http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Jaehoon Lim (검색결과 218 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
JaeHoon Lim,Sang Soon Cho,Woo-seok Choi 한국방사성폐기물학회 2019 방사성폐기물학회지 Vol.17 No.2
최근 국내에서 육상 및 해상을 통한 소외 정상운반 시 진동 및 충격하중에 대한 사용후핵연료의 건전성 평가 기술 개발이 수행되고 있다. 이와 관련된 국내 연구사례는 전무하여 기존에 진행된 또는 현재 수행중인 해외연구사례를 조사하여 국내 연구에 참고하고자 한다. 2000년 이전 과거 미국의 사용후핵연료의 정상운반 시 진동 및 충격하중 측정 관련 연구현황을 조사 하였고 2009년부터 미국국립연구소 주관으로 실시한 단축가진시험, 콘크리트블럭 트럭운반시험, 다축가진시험에 대해서 조사하였으며 2017년 미국 SNL, 스페인의 ENSA, 한국이 공동으로 수행한 복합운반시험을 상세히 조사하였다. 시험 준비과정, 절차, 가속도 및 변형률 측정결과, 유한요소 및 다물체동역학 해석과정 등이 조사되었다. 각 시험 별로 측정된 변형률 자료를 바탕으로 사용후핵연료 피로곡선과 비교한 결과 손상을 일으키기에는 매우 미미한 정도의 변형률이 발생한다는 초기 결론을 얻었음을 확인하였다. 하지만 현재 결론은 일부 결과만을 검토한 예비 결론으로 상세한 검토가 현재 미국에서 진행 중이다. 미국에서 지금까지 수행한 사용후핵연료의 정상운반조건에서의 진동 및 충격하중 측정과 관련하여 조사된 내용은, 국내 운반환경에서 사용후핵연료의 정상운반시험을 수행할 때 참고할만한 유용한 자료라 판단된다. Currently, the development of evaluation technology for vibration and shock load characteristics and spent nuclear fuel structural integrity under normal conditions of transport is being conducted in the Republic of Korea. This is the first such research conducted in the Republic of Korea and, thus, previous international studies need to be investigated and will be referred to in the ongoing project. Before 2000, several studies related to measurement of vibration and shock loads on spent nuclear fuel were conducted in the US. US national research institutes conducted uniaxial fuel assembly shaker tests, concrete block tests, and multi-axis fuel assembly tests between 2009 and 2016. In 2017, multi-modal transportation tests including road, sea, and rail transport were also performed by research institutes from the US, Spain and the Republic of Korea. Therefore, test preparation procedures, acceleration and strain measurement results, and finite-element and multi-body dynamics analysis were investigated. Based on the measured strain data, the preliminary conclusion was obtained that the measured strain was too small to cause damage to spent nuclear fuel rods. However, this conclusion is a preliminary conclusion that only reviews part of the results; a detailed review is being conducted in the US. The investigation of international studies on spent nuclear fuel structural integrity tests considering vibration and shock loads under normal conditions of transport in the US will be useful data for the project being conducted in the Republic of Korea.
-
-
JaeHoon Lim,Sang Soon Cho,Woo-seok Choi 한국방사성폐기물학회 2020 방사성폐기물학회지 Vol.18 No.2(E)
2017년 미국 DOE 주도하에 수행된 국제공동 복합모드운반시험 중 도로트럭운반시험, 연안항해시험, 대서양항해시험에서 측정된 가속도 및 변형률 데이터를 분석하였다. 먼저 각 운반모드 별로 발생한 하중이 전달경로에 따라 하중이 증폭되는지 감쇄되는지가 조사되었다. 그 결과 운반모드 및 하중경로 내 어떤 부분이냐에 따라 발생한 하중이 모의핵연료집합체에 전달되는 특성이 다름을 확인하였다. 그리고 변형률 데이터를 분석하여 육상 및 해상운반동안 발생한 변형률이 사용후핵연료에 건전성에 미치는 영향을 파악하였다. 그 결과 측정된 변형률은 사용후핵연료의 건전성에는 영향을 미치지 못하는 정도로 작은 크기임을 확인하였다. 본 연구에서 분석된 가속도와 피로평가 결과는 예정된 국내 정상운반시험조건에서의 운반시험에 유용한 기초자료로 활용될 것이다. In 2017, multimodal transportation tests for evaluating road, sea, and rail transport were performed by research institutes in the US, Spain, and the Republic of Korea. In this study, acceleration and strain data determined through road and sea tests were analyzed. It was investigated whether the load generated for each transport mode was amplified or attenuated according to the load transfer path. From the results, it was confirmed that the load transfer characteristics differed according to the transportation mode and loading path. The effects of strain determined through each test on the structural integrity of the spent nuclear fuel were also investigated. It was found that the magnitude of the measured strain had a negligible effect on the structural integrity of the spent nuclear fuel, considering its fatigue strength. The results for the acceleration and strain data analyses obtained in this study will be useful for scheduled domestic transportation tests under normal transport conditions.
-
-
Survey of Dynamic Material Properties of Degraded Concrete in Dry Cask Storage System
JaeHoon Lim,Joonwon Lee,SeungPil Kim,Sang Soon Cho 한국방사성폐기물학회 2022 한국방사성폐기물학회 학술논문요약집 Vol.20 No.1
Concrete structures of spent nuclear fuel interim storage facility should maintain their shielding ability and structural integrity during normal, off-normal and accident conditions. The concrete structures may deteriorate if the interim storage facility operates for more than several decades. Even if deterioration occurs, the concrete structures must maintain its unique functions (shielding and structural integrity). Therefore, it is necessary to establish an analysis methodology that can evaluate whether the deteriorated concrete structure maintains its integrity under not only normal or off-normal condition but also accident condition. In accident conditions such as tip over and aircraft collision, both static material properties and dynamic properties of the concrete are required to evaluate the structural integrity of the concrete structures. Unlike the calculated damage results for the static deformation of the concrete structure, it is very difficult to accurately estimate the damage values of the degraded concrete structures where an aircraft collides at a high strain rate. Therefore, the present authors have a plan to establish a database of the dynamic material properties of deteriorated concrete and implement to a Finite Element Analysis model. Prior to that, dynamic increase factors described in a few technical specifications were investigated. The dynamic increase factor represents the ratio of the dynamic to static strength and is normally reported as function of strain rate. In ACI-349, only the strain rate is used as a variable in the empirical formula obtained from the test results of specified concrete strengths of 28 to 42 MPa. The maximum value of dynamic increase factor is limited to 1.25 in the axial direction and 1.10 in the shear direction. On the other hand, in the case of the CEB model, static strength is included as variables in addition to the strain rate, and a constitutive equation in which the slope changes from the strain rate of 30 /s is proposed. As plotting the two dynamic increase factor models, in the case of ACI, it is drawn as a single line, but in the case of CEB, it is plotted as multiple lines depending on the static strength. The test methods and specimen sizes of the previously performed tests, which measured the concrete dynamic properties, were also investigated. When the strain rate is less than 10 /s, hydraulic or drop hammer machines were generally used and the length of the specimens was more than twice the diameter in most cases. However, in the case of Split Hopkinson Pressure Bar tests, the small size specimens are preferred to minimize the inertia effect, so the specimens were small and the length was less than twice the diameter. We will construct the dynamic properties DB with our planned deteriorate concrete specimen test, and also include the dynamic property data already built in the previous studies.
-
-
JaeHoon Lim,Woo-seok Choi,Jongmin Lim,Gil-Eon Jeong,Joonwon Lee,SeungPil Kim 한국방사성폐기물학회 2022 한국방사성폐기물학회 학술논문요약집 Vol.20 No.1
Currently, the development of evaluation technology for vibration and shock loads transmitted to spent nuclear fuel and structural integrity of spent nuclear fuel under normal conditions of transport is progressing in Korea by the present authors. Road transportation tests using surrogate spent nuclear fuel were performed in September, 2020 using a test model of KORAD-21 transportation cask and sea transportation tests were conducted from September 30 to October 4, 2021. In order to investigate amplification or attenuation characteristics, according to the load transfer path, a number of accelerometers were attached on a ship cargo hold, cradle, cask, canister, disk assembly, basket, and surrogate fuel assemblies and to investigate the durability of spent nuclear fuel rods, strain gages were attached on surrogate fuel assemblies. A ship named “JW STELLA” which has similar deadweight (5,000 ton) of existing spent nuclear fuel transportation ships was used for the sea transportation tests. The ship is propelled by 1,825 hp two main engines with two 4-bladed propellers. There are two major vibration sources in the ship. One is the vibration from waves and the other is the vibration from the engine and propeller system. The sensor locations on the ship were determined considering the vibration sources. The sea transportation test was performed for 5 days, the test data were measured successfully. The ship with the test model was departed from Changwon and sailed to Uljin, sailed west to Yeonggwang and then returned to Changwon. In addition to sailing on a designated test route, circulation test, braking/acceleration test, depth of water test, and rolling test were conducted. As a result of the preliminary data analysis of the sea test, power spectral densities and shock response spectrums were obtained according to the different test conditions. The vibratory loads caused by the wave mainly occurred in the frequency range of 0.1 to 0.3 Hz. The vibratory loads caused by the propeller occurred near the n/rev rotating frequencies, such as 5, 10, 20 Hz etc. However, those frequencies are far from the natural frequencies of local mode of the fuel rods, so it is considered that the vibratory loads from the wave and the propeller do not have a significant influence on the structural integrity of the fuel rods. Among all the test cases, maximum strain occurred at SG31 near the bottom nozzle on the test; the magnitude was 73.62 micro strain. Based on the analyzed road and sea transportation test data, a few input spectra for the shaker table test will be obtained and the shaker table test will be conducted in 2022. It is expected that the detailed vibration characteristics of the assembly which were difficult to identify from the test results can be investigated.
-
Dynamic Material Testing of Concrete Cores From HANARO
JaeHoon Lim,Jongmin Lim,Yun-young Yang,Sung-Hyo Lee,Sang Soon Cho 한국방사성폐기물학회 2023 한국방사성폐기물학회 학술논문요약집 Vol.21 No.2
Concrete structures of spent nuclear fuel interim storage facility should maintain their ability to shield and structural integrity during normal, off-normal and accident conditions. The concrete structures may deteriorate if the interim storage facility operates for more than several decades. Even if deterioration occurs, the concrete structures must maintain their own functions such as radiation shielding protection and structural integrity. Therefore, it is necessary to establish an analysis methodology that can evaluate whether the deteriorated concrete structure maintains its integrity under not only normal or off-normal condition but also accident condition. In this study, dynamic material testing was conducted on concrete cores extracted from HANARO exterior wall during seismic reinforcement construction. HANARO was constructed at the Korea Atomic Energy Research Institute in 1995, following strict nuclear quality assurance standards. In order to conduct the dynamic material testing of the extracted concrete cores, self-disposal had to be performed because the concrete cores were extracted and stored in a radiation controlled area. A self-disposal application was prepared and submitted based on the radionuclide analysis results, and it was finally approved in April 2023. Then, a test was performed by processing a specimen for dynamic property testing using a self-disposed concrete core. The concrete cores were processed to create specimens for dynamic material testing and the dynamic material testing was performed to obtain stress-strain diagrams according to the strain rate.
ScienceON연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
