http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A probabilistic fatigue failure analysis for FRSCC with Granite sawing waste
Aarthi.K,Arunachalam.K,Thivakar.S 사단법인 한국계산역학회 2016 Computers and Concrete, An International Journal Vol.18 No.5
This paper investigates the compressive fatigue behaviour of polypropylene fibre reinforced self compacting concrete with Granite Sawing Waste (GSW). An experimental programme was conducted to obtain the fatigue lives of fibre reinforced self compacting concrete (FRSCC) at various stress levels. The stress ratio was kept constant as 0.3. Compressive fatigue test was conducted on 60 cubic specimens with 100mm edge length and 0.1% of polypropylene fibres at a frequency of 0.05Hz. The test results indicate that the fatigue lives of concretes containing granite sawing waste follow the double-parameter Weibull distribution. The fatigue strength equations have been developed based on different probabilities of failure.
Arunkumar, P.,Aarthi, U.,Sribalaji, M.,Mukherjee, B.,Keshri, Anup Kumar,Tanveer, Waqas Hassan,Cha, Suk-Won,Babu, K. Suresh Elsevier 2018 Journal of alloys and compounds Vol.765 No.-
<P><B>Abstract</B></P> <P>Pure zirconia (ZrO<SUB>2</SUB>) and ceria (16 mol%) stabilized zirconia (CeSZr) thin films were prepared by electron beam physical vapor deposition with varying deposition rates (1, 4 and 8 Å/s) in order to correlate the phase changes to the mechanical property. X-ray diffraction and Raman spectra results indicate the presence of mixed monoclinic and tetragonal phases in ZrO<SUB>2</SUB> film, but tetragonal phase dominated at lower deposition rate. However, irrespective of the deposition rate, cerium addition to ZrO<SUB>2</SUB> resulted in complete stabilization of tetragonal phase. Depending on the presence of dual (ZrO<SUB>2</SUB>) or single (CeSZr) phase, either surface cracks or well-connected grain structure was observed in SEM, respectively. Thus, CeSZr film showed a four-fold increase in hardness in comparison to ZrO<SUB>2</SUB>, which can be attributed to the complete stabilization of tetragonal phase that hinders the crack propagation along the grain. Plastic deformation of CeSZr film was found to be 1.80 × 10<SUP>−2</SUP> GPa, which is about ∼55% higher as compared to pure ZrO<SUB>2</SUB> film (8.04 × 10<SUP>−3</SUP> GPa). Thus, the development of CeSZr coating may lead to better surface protection of many components.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Zirconia and ceria (16 mol%) stabilized zirconia (CeSZr) films deposited by EB-PVD. </LI> <LI> ZrO2 thin film showed mixed tetragonal and cubic structure. </LI> <LI> CeSZr thin film formed with single phase tetragonal structure. </LI> <LI> CeSZr film exhibited a four-fold increase in hardness in comparison to ZrO2 film. </LI> <LI> Deposition rate and chemistry influence the mechanical property of films. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>