http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조명용 백색 LED광원의 등기구 형태에 따른 광도 및 기구효율 분석
황명근,허창수,서유진,Hwang, Myung-Keun,Huh, Chang-Su,Seo, Yu-Jin 한국조명전기설비학회 2004 조명·전기설비학회논문지 Vol.18 No.3
본 논문에서는 조명용 고휘도(HB, high brightness) 백색 LED(light emitting diode)램프의 배열 및 여러 가지 등기구 글로브(globe)의 형태에 따른 광도(luminous intensity)값과 기구효율(luminaire efficiency)을 컴퓨터 시뮬레이션으로 수행하여 비교분석 하였다. 즉, LED의 배열은 가로${\times}$세로(7개${\times}$7개)가 정사각형 형태로 49개를 배열하고, LED 간격은 LED의 발광면 중심부로부터 8.2[mm], 10.0[mm], 15.0[mm]로 각각 3가지로 하였으며, 등기구의 글로브는 LED발광면 중심부에서 30[mm], 50[mm] 떨어진 거리로 구분하였다. 또한 등기구 글로브가 없을 때와 있을때로 구분하여 있을 때에는 글로브 형태를 볼록 원형과 엠보(embossing)형태로 구분하고 엠보는 8.2[mm], 5.0[mm]의 크기에 따른 선택으로 시뮬레이션 27가지로 수행하여 등기구의 글로브 형태에 따른 광도 및 기구효율을 고찰해 봄으로써 앞으로 21세기 디지털조명이라고 일컫는 LED를 사용한 LED 광원(light source) 및 등기구 개발에 많은 도움이 되고자 하였다. In this paper, luminaire optical efficiency and luminous intensity according to array of HB(high brightness) white LED(light emitting diode) and globe types of luminaire were simulated by computer and made a comparative analysis. LEDs were arranged by square of 7ea X 7ea. LED space has been divided into 8.2mm, 10mm and 15mm that mean distances between luminous centers of LEDs, and luminaire globes were classified into 30mm and 50mm 묘묘 from luminous center of LEDs. Also the simulations were made with / without globe, globe types were specified by convex and embossing types of which sizes are 8.2mm and 5.0mm, So total 27 classes of simulation were performed. This paper is to help luminire development using LED light source called digital lighting of 21th century, by studying luminire effciency and luminous intensity of different types of globes.
황명근(Myung-Keun Hwang),이세현(Se-Hyun Lee),신상욱(Sang-Wuk Shin),조미령(Mee-Ryoung Cho),양승용(Seong-Yong Yang),정관진(Kwan-Jin Jung),배영진(Young-Jin Bae) 한국조명·전기설비학회 2007 한국조명·전기설비학회 학술대회논문집 Vol.2007 No.5월
광속구에서 광원(light source)의 광속(luminous flux)을 측정할 때, 통상적인 측정환경의 변화는 보조램프(aux. lamp)를 사용하여 그 차이를 보정할 수 있다. 그러나 PLS(plasma lighting system)와 같이 표준광원과 시료광원의 위치가 크게 다를 경우에는 그에 따른 광속변화를 직접 측정하고 보정계수를 산출ㆍ반영하거나 시료광원의 측정위치와 동일한 위치에서 Calibration을 시행해야 할 것이다. 따라서 본 논문에서는 광속구에서의 기존 광원의 광학적 특성치를 통하여 새롭게 개발되는 광원류에 대한 부 표준램프를 제작 실험한 결과를 제시한 것이다. 광속구에서의 광특성은 센터와 사이드 측정방식에 의한 특성결과치를 기준으로 보정계수를 구하고 부 표준램프를 제작하였다.
黃明根(Myung-Keun Hwang),申相旭(Sang-Wuk Shin),李鎭雨(Chin-Woo Yi) 대한전기학회 2009 전기학회논문지 Vol.58 No.2
When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.
황명근(Myung-Keun Hwang),신상욱(Sang-Wuk Shin),조미령(Mee-Ryoung Cho),이세현(Se-Hyun Lee),전상규(Sang-Kyoo Jeon) 한국조명·전기설비학회 2007 한국조명·전기설비학회 학술대회논문집 Vol.2007 No.11월
본 논문에서는 현재 가장 많이 사용되는 조명용 LED광원에 대한 EMI특성을 측정 분석 분석하였다. LED광원의 자기장 유도전류와 각각의 인입 전원선에 대한 잡음 단자전압 등을 측정 및 분석하였으며, 향후 LED광원 관련 규격 제안시 참고자료로 활용될 것으로 판단된다. In this paper, we have analyzed EMI characteristics for the most widely used LED light source for general light purposes. The magnetic field induced current of LED light source and noise terminal voltage for each electric power line has been measured and analyzed. we conclude it is used as a reference when the standards related to LED light source are proposed.
황명근(Myung-Keun Hwang),신상욱(Sang-Wuk Shin),조미령(Mee-Ryoung Cho),이세현(Se-Hyun Lee),이영주(Young-Joo Lee),김진선(Jin-Sheon Kim) 한국조명·전기설비학회 2007 한국조명·전기설비학회 학술대회논문집 Vol.2007 No.5월
본 논문에서는 LED광원에서 현재 가장 많이 사용되는 MR과 PAR 타입의 램프를 측정 분석하였다. 최대광도 및 광속의 측정값을 비교 분석하였다. 그러나 MR 16 및 PAR 30의 경우 관련 KS 규격상에 광속에 대한 값을 명기하고 있지 않은데 이것은 램프 뒤쪽에 반사경(다이크로익 미러)이 부착되어 있어 가시광을 일정한 방향으로 집중시키는 투광 개념의 광원이므로 광속 측정의 의미가 필요하지 않아서 인 것으로 생각된다. LED광원의 경우 LED자체의 광 확산이 매우 광범위하고, 반사경의 영향을 적게 받고 있어 사이드 방식으로 측정된 상기의 광속값은 불확도 범위이내에 존재할 것이 확실시되므로 향후 LED관련 규격의 제안시 측정이 요구될 것으로 판단된다.
황명근(Myung-Keun Hwang),장우진(Woo-Jin Jang),양승용(Seong-Yong Yang) 한국조명·전기설비학회 2007 한국조명·전기설비학회 학술대회논문집 Vol.2007 No.5월
형광램프와 HID(high intensity discharge)램프는 수은(Hg)에 의해 빛을 방사한다. 산업환경의 변화속에서 침체기를 맞고 있는 국내 조명산업이 내부적으로 친환경 조명제품 개발에 주력하고, 외부적으로는 환경규제로 인한 피해를 최소화시킴과 동시에 적극적인 세계시장공략으로 고부가가치산업을 성장할 수 있도록 조명분야의 환경규제 동향을 조사하여 조명산업 전반에 널리 홍보함으로써 국내 조명산업의 지속적인 경쟁력 및 성장가능성 확보에 목적을 두고 있다. 선진국을 중심으로 제도화되고 있는 환경규제(RoHS, WEEE 등)에 따른 문제점과 예상 영향(피해)도를 조사, 분석하여 시기적절한 효율적인 발전방안을 모색함으로써 국내 조명산업의 지속적인 경쟁력 및 성장가능성 확보를 위한 조명산업 발전방안 제시에 목적을 두고 있다.