http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 허미자(Mi-Ja Her) (검색결과 3 건)
- 무료
- 기관 내 무료
- 유료
-
상아질과 Gutta-Percha에 대한 근관충전용 Sealer의 결합강도의 측정
허미자,유미경,이세준,이광원,Her, Mi-Ja,Yu, Mi-Kyung,Lee, Se-Joon,Lee, Kwang-Won 대한치과보존학회 2003 Restorative Dentistry & Endodontics Vol.28 No.1
The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.
-
-
Jang, Jin-Ah,Kim, Hee-Lyang,Her, Mi-Ja,Lee, Kwang-Won,Yu, Mi-Kyung 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.5
Objectives: To compared the effect of different levels of moisture of root canal on the sealing ability after filling with four different types of sealer. Materials and Methods: Single-rooted teeth (n = 90) instrumented to and apical size of 0.06 / 45 were randomly assigned to 12 experimental groups (n = 7 per group), positive/negative control groups (n = 3 per group). The teeth of the experimental groups (a. DRY; b. PAPER POINT DRY; c. WET) were obturated with sealer (Group 1-3: Sealapex; Group 4-6: AH plus; Group 7-9: Tubuli-seal; Group 10-12: EndoRez) and warm vertical compaction method. After 7 days in 37˚C, 100% humidity, the coronal-to-apical microleakage was evaluated quantitatively using a glucose leakage model. The leaked glucose concentration was measured with spectrophotometer at 1, 3, 7, 14, 21, and 30 days. Data were recorded ad mmol/L and statistically analysed with the two-way ANOVA and Duncan test (p = 0.05). Results: Throughout the experimental period Tubuli-seal/WET (Group 9) showed the highest mean cumulative glucose penetration (178.75 mmol/L), whereas AH plus/DRY (Group 4) had the least (20.78 mmol/L). Conclusions: The results of this study demonstrated that the moisture condition of root canals at the time of obturation and the type of sealer that was used had a significant effect on leakage and sealing ability. Thus drying procedure according to sealer types is a critical step and should not be missed in endodontic treatment. 연구목적: 본 연구의 목적은 수종의 sealer를 이용하여 각기 다른 양의 잔여수분이 존재하는 근관을 충전 시, 근관충전의 sealing ability를 glucose leakage model로 평가하는 것이다. 연구 재료 및 방법: 발치된 90개의 단근치를 치관부를 잘라내고 #45 / 0.06 taper까지 확대한 후, 12개의 실험군 (n = 7)과 2개의 대조군 (n = 3)으로 나누었다. 실험군을 3가지 습윤 상태에서 (a, DRY; b, PAPER POINT DRY; c, WET) 4종류의 sealer로 (Group 1-3: Sealapex; Group 4-6: AH plus; Group 7-9: Tubuli-seal; Group 10-12: EndoRez), warm vertical compaction method를 이용해 충전하였다. 37˚C, 습도 100%에서 7일 동안 보관하고 glucose leakage model을 이용하여 치관부로부터 치근부 방향의 미세누출을 정량화하였다. 1, 3, 7, 14, 21, 30일 째 누출된 glucose의 농도를 spectrophotometer로 측정하였다. 결과: 관찰기간 동안 AH plus/DRY군 (Group 4)이 12개 그룹 중 가장 적은 양의 leakage를 보였다 (20.78 mmol/L). 반면에 Tubuli-seal/WET군 (Group 9)이 12개 그룹 중 가장 높은 양의 leakage를 보였다 (178.75 mmol/L). 결론: 본 연구의 결과는 충전 시 근관 내의 습윤 상태와 sealer 종류가 microleakage에 유의한 영향을 미친다는 것을 입증하였다. 그러므로 sealer 종류에 따라 각기 다른 근관 건조 방법을 사용하는 것이 근관치료에서 더 좋은 결과를 얻을 수 있는 방법일 것이다.
RISS
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
