http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허남수(Huh Nam-Soo),조대철(Cho Daechul),권성현(Kwon Sung-Hyun) 한국산학기술학회 2004 한국산학기술학회 학술대회 Vol.- No.-
Filter media are one of themost important choices when bilfiltration is applied. Filter media provide adsorbing microbes with available sites for residence and the residential cells grow to degrade or decompose target waste gases. Up to date, filter media were only qualitatively analyzed. As a quantitative approach to filter material for biofiltration, a simple model based on reaction kinetics and mass action law (Ottengraf’s Model in1983) was presented. Cork, zeolite, and granulated activated carbon were tested in terms of effective surface area, cell covered fraction of adsorbing sites, surface roughness, and pore size distribution. The cell covered fraction, surface roughness and hydrophilicity was found to be closely related to the efficiency of gas degradation in biofiltration. The cork was the best candidate for cell residence and growth in this work.
PU매체에 부차한 유류분해 bacteria를 이용한 오염토양 처리
조대철(Cho, Dae-Chul),허남수(Huh, Nam-Soo),권성현(Kwon, Sung-Hyun) 한국산학기술학회 2006 한국산학기술학회논문지 Vol.7 No.3
토양의 생물학적 복원은 산업화로 무차별하게 오염되어 있는 국내 산업단지 주변과 지하수 환경보전을 위한 경제적 도구로 인식되어왔다. 본 연구는 친환경적 생물복원을 위한 기초자료를 얻기 위하여 유류로 오염된 양토에서 Pseudomonas sp. (KCCM 40055)를 접종한 polyurethane 매체환경을 적용, 유류의 성분중 PAH 분해도를 조사하였다. 다공성 매체로서 재현성이 뛰어나며 미생물 부착에 활용되어 온 polyurethane foam을 사용하여 미생물 부착성을 아울러 조사하였다. 사용된 PU중 최저공극 foam인 SR9-35CfG 의 경우 부착률과 PAH분해율이 가장 높았으며 토양함수율 증가에 따라 그 효율이 증가하였다. Bioremediation has been recognized as one of the best tools for hydrocarbon contaminated soil and nearby groundwater which had been heavily polluted in industrial areas. Degradation of PARs in PAR-polluted loam soil were investigated under polyurethane foam environment with adsorbed bacteria Pseudomonas sp. (KCCM 40055) in order to acquire vital data for the environmentally-friendly process and material. macroporous commercial polyurethane foam that is widely used for microbial attachment in such as sewage treatment was selected for experiments. We also examined the microbial adherence upon the media. SR9-35C/G among the PU samples showed the highest degree of attachment and bioconversion. The conversion efficiency increased with moisture content of soil.
장태식(Jang Tae sik),조대철(Cho Daechul),허남수(Huh Nam-Soo) 한국산학기술학회 2005 한국산학기술학회 학술대회 Vol.- No.-
PAHs의 분해를 위해 Bacillus subtilis 와 Phanerochaete chrysosporium의 두 미생물을 사용하였고, 이들을 부착시킬 담체로 코르크와 톱밥를 선정하여 미생물을 접종시켰다. Phenanthrene 분해의 경우, 반응 초기에는 분해 속도가 매우 빠르지만 반응 12일째 분해 속도가 떨어졌다. 분해 속도는 1)톱밥에 담지한 Bacillus subtilis, 2)코르크에 담지한 Bacillus subtilis, 3)톱밥에 담지한 Phanerochaete chrysosporium, 4)코르크에 담지한 Phanerochaete chrysosporium의 순으로 나타났다.
발포 Polyurethane에 점착하는 미생물 Biomass측정
송인상(Song In Sang),조대철(Cho Daechul),허남수(Huh Nam-Soo) 한국산학기술학회 2005 한국산학기술학회 학술대회 Vol.- No.-
미생물 고정화를 위하여 PU 폼을 세 가지 처리 방법으로 처리하였다. 플라즈마 처리, 플라즈마 유도 그라프팅, 플라즈마 유도 그라프팅 후 플라즈마로 재처리 방법을 사용하였다. 플라즈마 처리는 bacteria adhesion에 큰 효과를 주지 못하였고, 아크릴산의 플라즈마 유도 그라프팅은 adhesion을 세 배 이상 증가시켰다. Bacteria의 adhesion 성능 향상은 표면의 친수성을 증가시키고 새로운 groove나 cavity들을 형성시킴으로 가능하였다. 반면, 그라프팅 후 plasma re-treatment는 미생물 고정화를 크게 향상시키지 못하였다. SEM 관찰을 통하여 대부분의 E.coli.는 groove나 cavities라는 shear-free area에 서식함을 알 수 있었다. PU폼의 bacteria adhesion은 미생물과 고분자 표면 사이의 정전기적 인력이나 van der Waals 인력에 의해 주로 영향을 받는다고 사료된다.
호수 퇴적물의 호기 및 혐기조건에서의 용출 특성에 대한 연구
윤미해(Mi Hae Yoon),현준택(Jun Taek Hyun),허남수(Nam Soo Huh),권성현(Sung Hyun Kwon),조대철(Dae Chul Cho) 大韓環境工學會 2007 대한환경공학회지 Vol.29 No.9
호수 퇴적물의 용출로 인한 수질오염을 예측하고 퇴적 위치에 따른 용출 특성을 파악하기 위해 환경 조건에 따른 용출 차이를 분석하였다. 분석 항목으로는 질소계열, 인계열, COD를 분석하였으며, 모든 시료의 분석 방법은 호수 내부수의 염도가(Cl-) 2,000ppm 이상이므로 해수 수질공정 시험법에 준하여 실시하였다. COD는 혐기조일 경우 A지점에서 C지점으로 갈수록 용출율이 증가한 반면, 호기조일 경우 증·감의 경향성이 없었다. NH₃-N의 호기조일 경우 A지점에서 C지점으로 갈수록 용출율이 감소하였고, 반대로 질산화 작용으로 인해 NO₃-N과 T-N은 A지점에서 C지점으로 갈수록 용출율이 증가하였다. NH₃-N, NO₃-N의 혐기조는 A지점에서 C지점으로 갈수록 용출율이 증가하였으나 탈질화 작용으로 인하여 T-N의 용출율은 감소하는 경향을 보였다. PO₄-P, T-P의 경우 호기조에서 B지점의 용출율이 가장 낮았으며, 이는 용존 산소의 함량이 많아 무기물이 산화되면서 인의 용출이 억제된 것으로 판단된다. PO₄-P의 혐기조일 경우 A지점부터 C지점의 용출율이 서로 유사하였다. COD와 NO₃-N의 경우 혐기조보다 호기조에서 용출율이 높았으며, 그 외의 항목에서는 호기조보다 혐기조에서 용출율이 높았다. In this study, we analyzed the release differences for some critical pollution compounds according to the surrounding conditions in order to predict water quality due to the sedimental releases and the release characteristics at different sedimental locations in Lake Leewon, in Tae-An area. COD, nitrogens and phosphates were analyzed using the standard methods for water quality, based on high chloride ion concentration(greater than 2,000 ppm). For COD, the release rate increased in the anoxic basin but almost the same in the oxic basin. For NH₃-N, the release rate decreased in the oxic basin as you go A through C point meanwhile, for NO₃-N and T-N, the tendency was reversed because of nitrification of them. In the anoxic basin, the release rates of NH₃-N and NO₃-N went up with A through C path. However, the release rate of T-N was found to decrease. Also, for PO₄-P and T-P, the release rates in the oxic basin were lowest at B point mainly because the phosphates were at less released in the highly O₂ concentrated environment. In the anoxic reactor, PO₄-P was released similarly regardless of the sampling points. In summary, the release rates in the oxic reactor were greater than those in the anoxic reactor for COD and NO₃-N. For the other components, the anoxic basin generated the higher release rates.
다양한 평가방법을 이용한 원형 노치 CT 시편의 피로수명평가
장동주(Dong-Joo Chang),강주연(Ju-Yeon Kang),허남수(Nam-Su Huh),김진원(Jin-Weon Kim),김종성(Jong-Sung Kim),김윤재(Yun-Jae Kim),김대수(Dae-Soo Kim),김형욱(Hyeong-Wook Kim) 대한기계학회 2018 대한기계학회 춘추학술대회 Vol.2018 No.12
In the present work, the fatigue life of a round-notched compact tension (CT) specimen has been evaluated using two different fatigue life evaluation methods. One is Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III and the other is structural stress based approach provided in ASME B&PV Code, Sec. VIII. The fatigue crack initiation tests were conducted using a round-notched CT specimen, which is made of SA312 TP316 stainless steel, under displacement-controlled cyclic condition, and then experimental fatigue initiation life of that specimen was measured. To predict fatigue life of this CT specimen using DBA based approach, 3-D elastic FE analyses were carried out using experimental condition, and fatigue life was predicted based on both design and best-fit fatigue curve of same material suggested in ASME B&PV Code, Sec. II. Moreover, the fatigue life of CT specimen was also investigated using the structural stress based approach. Finally, the fatigue lives predicted either based on DBA procedure or structural stress based approach were compared with experimental results, and the accuracy of such engineering fatigue life evaluation methods was discussed.
목재재질의 담체를 혼합한 토양에서 Bacillus subtilis에 의한 PAH분해에 대한 연구
권성현(Kwon, Sung-Hyun),유승희(Yoo, Seung-Hye),조대철(Cho, Dae-Chul),허남수(Huh, Nam-Soo),김종향(Kim, Jong-Hyang) 한국산학기술학회 2005 한국산학기술학회논문지 Vol.6 No.3
PAHs는 2개 이상의 벤젠링을 가지는 방향족 탄회수소로, 특성과 분자량에 의해 크게 두 가지로 구분되며, 독성 유기물질들이 직·간접적으로 인간에게 피해를 준다. 이러한 PAHs에 오염된 토양을 복구하기 위해서 PAHs를 완전분해 또는 무독성 화합물로 전환시켜야 한다. 본 연구에서는 PAHs분해를 위해 Bacillus subtilis을 사용하였고, 담체로 코르크분말과 톱밥을 선정하였다. Phenanthrene을 분해한 경우 코르크분말 담체와 톱밥담체가 비슷한 분해양상을 보였으며, pyrene을 분해한 두 담체의 경우 톱밥 담체가 우수하다고 판명되었다. 또한 토양함수율은 분해제거효율의 주 영향요소로서 45~55%의 함수율 일 때 최적의 효율을 나타냈다. PAHs are aromatic hydrocarbon compunds with two or more benzene rings. Because they are mostly toxic to human life, they need to be converted to non-toxic compunds or to be degraded completely. This work aims to degrade PAHs (phenanthrene and pyrene) using Bacillus bacteria covered on cork or sawdust. The results show that media effect on phenanthrene was negligible whereas biodegradation ability of sawdust carrying the bacteria was better than that of biofilm-covered cork when pyrene was tested. PAH removal was also affected by soil moisture content with 45~55% of the optimal content.