http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경량 모르터용 건식공정 바텀애시의 입형 개선 효과와 최적 입도
최홍범,김진만,선정수,한동엽,Choi, Hong-Beom,Kim, Jin-Man,Sun, Jung-Soo,Han, Dong-Yeop 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.1
본 연구의 목적은 건식공정을 통해 생산된 바텀애시를 이용하여 친환경적이고 저렴한 경량콘크리트의 잔골재로 활용하는 것이다. 기존의 습식공정과 비교하여 건식공정은 물에 닿지 않고, 염분이 없으며, 다소 느린 공정으로 완전연소를 통해 미연소탄소성분이 거의 없다. 이러한 건식공정 바텀애시를 경량 모르터용 잔골재로서 타당성을 평가하기 위해 골재의 입형 개선 효과와 최적 입도분포의 두가지 단계로 나누어 실험을 실시하였다. 첫 번째 실험에서 추가적인 마쇄과정을 통해 얻어진 양호한 입형의 바텀애시는 유동성과 강도 측면에서 양호한 결과를 나타내었으며 다소간의 단위용적질량 증가를 보였다. 두 번째 실험에서 다양한 입도를 구성하여 실험을 실시하였고, 그 결과 표준입도에 맞추어진 입도에서 굳지 않은 상태 및 경화상태에서 양호한 성능을 나타내었다. 본 연구의 결과를 통해 차후 건식 공정을 통한 바텀애시의 활용방법이 확대되고, 바텀애시를 경량 잔골재로 활용함으로서 부가가치 상승에 기여할 것으로 예상된다. The aim of this research is suggesting dry processed bottom ash as a new and economical source of lightweight aggregate for mortar and concrete. The dry process of bottom ash is an advance method of water-free and no chloride because only cooled down by double dry conveyer belt systems. Furthermore, because of relatively slow cooling down process helps burning up the remaining carbon in bottom ash. Using this dry process bottom ash, to evaluate the feasibility of using as a lightweight aggregate for mortar and concrete, two-phase of experiments were conducted: 1) improving shape of the bottom ash, and 2) controlling grade of the bottom ash. From the first phase of experiment, additional abrasing process was conducted for round shape bottom ash, hence improved workability and compressive strength was achieved while unit weight was increased comparatively. Based on the better shape of bottom ash, from the second phase, various grades were adopted on cement mortar, standard grade showed the most favorable results on fresh and hardened properties. It is considered that the results of this research contribute on widening sustainable method of using bottom ash based on the dry process and increasing value of bottom ash as a lightweight aggregate for concrete.
금속관 설비관통부 내화채움 시스템의 슬리브 종류 변화가 내화시험에 미치는 영향
최홍범 ( Choi Hong-beom ),정아영 ( Jeong A-yeong ),이형도 ( Lee Hyung-do ),박진오 ( Park Jin-o ),옥치열 ( Ok Chi-yeol ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.1
In this paper, the effect of change of sleeve type on fireproofing performance of through-penetration firestop system on metallic pipes was analyzed. As a result, if the material of the sleeve is high in thermal conductivity and thick, a large amount of heat is transferred to the top of the support structure.
Ca 추출 슬래그를 실리카 원료로 사용한 압출성형시멘트 패널의 특성
최홍범 ( Choi Hong-beom ),김진만 ( Kim Jin-man ),유재성 ( Yu Jae-seong ),현지수 ( Hyun Ji-soo ) 한국건축시공학회 2016 한국건축시공학회 학술발표대회 논문집 Vol.16 No.2
This paper evalutes properties of extruding cement panel using Ca-extracted convert slag and air-cooled blast furnace slag. Flexural strength of extruding cement panel has measured in air dry and autoclave curing as basic study for use as silicious source. As a result, when Ca-extracted converter slag replaces 25% in autoclave curing, flexural strength measures 13.1㎫ better than panel control mix. In result of using air-cooled blast furnace slag, Ca-extracted air-cooled blast furnace slag dose not show increase of flexural strength.
코로나 19 사회적 거리두기 지원을 위한 엣지컴퓨팅 기반 저가형 감시 카메라 시스템 프로토타입 구현
최홍범(Hong-Beom Choi),박창현(Chang-Hyeon Park),김민영(Min-Young Kim),고영배(Young-Bae Ko) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문에서는 마스크 착용 여부 및 인원 계수의 기능이 있는 지능형 자동화 감시 카메라를 엣지 컴퓨팅 환경에서 구현하였다. 또한 이러한 기능은 추가적인 장비 교체 없이 기존의 장비에 엣지 단말을 추가하여 활용될 수 있어 그 비용이 크지 않으며 다양한 분야에서의 활용이 가능하다. 특히 재난 대응 상황에서 건물 내 인원 추정 등의 어플리케이션에 활용될 수 있을 것으로 예상된다. 본 논문에서는 엣지 컴퓨팅 기반의 환경에서 인원 계수와 마스크 착용 판별 기능을 구현하고, 데이터를 처리하는 지연 시간을 기존의 클라우드 오프로딩 방식과 비교하였다.
광물탄산화를 거친 폐콘크리트 미분말을 실리카 원료로 활용한 압출성형패널의 특성
최홍범 ( Choi Hong-beom ),김진만 ( Kim Kin-man ),유재성 ( Yu Jae-seong ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.1
In this paper, research for use possibility as silica source of waste concrete powder discharged from direct and indirect carbonation has progressed. For the research, properties on the extruding panel using waste concrete powder with high silica content is evaluated. As the results, compressive strength of specimen is increased 24% compared to control specimen when waste concrete powder replaced 50%, that is discharged from carbonation process, as silica source.