http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
습식 순환골재의 생산공정에 적용 가능한 pH 저감제의 성능 검토
최중구,이건철,Choi, Jung-Gu,Lee, Gun-Cheol 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.4
재건축 재개발 사업 등으로 인하여 증가하는 건설폐기물을 효율적이고 친환경적으로 처리하기 위하여 건설폐기물을 재활용하여 사용하고 있다. 대표적으로 순환골재가 있으며, 이는 수산화칼슘에 의하여 높은 강알칼리성을 나타내며 많은 환경문제를 발생시키고 있다. 따라서 본 연구는 순환골재의 pH를 저감하기 위해 인산나트륨계암모늄염을 사용하여 순환골재의 강알칼리성을 감소시키기 위한 연구이다. 또한, 순환골재 pH 저감제의 현장적용 가능성을 평가하였다. 그 결과 pH 저감제 비율이 증가할수록 pH가 감소하는 것을 확인할 수 있었으며 순환골재 생산과정 중 pH 저감제를 이용한 침지, 분사 등의 방법으로 현장적용이 가능할 것으로 판단된다. Construction waste is recycled and used for the efficient and eco-friendly disposal of construction waste increasing due to reconstruction and redevelopment project and so on. There is recycled aggregate as a typical case. And this recycled aggregate shows strong alkalinity due to calcium hydroxide, and causes many environmental problems. Therefore, this is a study on reduction in the strong alkalinity of recycled aggregate by using sodium phosphate based ammonium in order to reduce the pH of recycled aggregate. Besides, a possibility that a pH reducing agent of recycled aggregate could be applied to a site was evaluated. As a result, it was possible to verify that pH decreased as the percentage of pH reducing agent increased. It is thought that the pH reducing agent can be applied to a site by methods such as immersion and spray using the pH reducing agent in the process of producing recycled aggregates.
VAE 분말수지가 고강도 폴리머 시멘트 모르타르의 강도 특성에 미치는 영향
최중구,이건철,고경택,류금성 한국건축시공학회 2015 한국건축시공학회지 Vol.15 No.3
In construction materials area, many research on polymer for cement-based materials have been conducted. In spiteof these research, general research scope is limited to the normal strength range, and thus in this research, for bothnormal and high strength range mixtures, the strength and mechanical properties of high strength cement mortarincorporating Vinyle Acetate-Ethylene(VAE) type powder polymer are evaluated. As a result of experiment, in the caseof high strength mixture, as the amount of VAE polymer addition was increased the compressive and flexuralstrengths were decreased while the tensile and bonding strengths were increased because of the formation of thepolymer membrane inside of the mortar matrix. 현재 건축분야에서는 시멘트 혼화용 폴리머를 혼입한연구가 진행되고 있는 상황이다. 하지만 대부분의 연구는보통강도 배합을 대상으로 연구가 진행되고 있다. 따라서본 연구에서는 고강도 배합과 보통강도 배합에 VAE 계열의 분말형 폴리머를 혼입하여 고강도 폴리머 시멘트 모르타르의 강도 특성 및 역학적 성질을 검토하고자 하였다. 실험결과, 고강도 배합의 경우 VAE 폴리머 적용 시 폴리머 혼입양이 증가할수록 보통강도 배합에 비해 압축강도 및 휨강도가 감소하는 단점을 나타내지만, 폴리머필름형성으로 인하여 인장강도 및 부착강도가 향상되는 장점을 나타내었다.
통해기를 이용한 위성무선통합 공공재난통신 서비스 활용 기술
최중구(Choi Jung Gu),김호겸(Kim Ho Kyom) 한국통신학회 2009 한국통신학회 학술대회논문집 Vol.2009 No.6
본 논문에서는 정부에서 제공하는 공공안전 재난구조 (PPDR: Public Protection and Disaster Relief) 서비스 중 재난구조와 관련된 통신 서비스의 사례를 검토하고 국내에서 추진하고 있는 통해기를 이용한 재난통신시스템의 구축방안 및 관련 기술의 검증방안에 대하여 고찰하였다.
강섬유 혼입율 및 형상비가 초고강도 콘크리트의 역학적 성질에 미치는 영향
최중구(Jung-Gu Choi),이건철(Gun-Cheol Lee),고경택(Kyung-Taek Koh) 한국건설순환자원학회 2017 한국건설순환자원학회 논문집 Vol.5 No.1
UHPC는 초고층 건물 및 초장대교의 경우 필연적으로 사용되어진다. 일반적으로 콘크리트는 압축강도보다 낮은 휨강도 및 인장강도를 가지므로 취성균열이 발생하여 에너지 흡수능력이 저하된다. 이러한 문제를 해결하기 위해 본 연구에서는 강섬유의 혼입율과 형상비가 UHPC의 기계적 물성에 미치는 영향을 조사하고자한다. 시리즈 I에서, 20㎜ 직선형 강섬유가 0, 1.0, 1.3, 1.5 및 2.0%의 혼입율로 첨가되었다. 시리즈 II에서는 16㎜ 강섬유를 0, 1, 1.5%로 혼입한 후 형상비에 따라 역학적 성질을 조사하였다. 실험결과, 압축강도의 차이는 미비했다. 하지만 휨강도 및 인장강도와 관련하여 혼입율 및 형상비가 증가함에 따라 휨성능 및 인장성능이 개선되었다. Ultra high performance concrete is inevitably used in case of skyscraper and super long span bridge. In general, the flexural and the tensile strengths of concrete are lower than the compressive strength, so brittle cracks occur and energy absorption ability is lowered. In order to solve this problem, this study is intended to examine the effect of the steel fiber volume fraction and aspect ratio on the mechanical properties of ultra high performance concrete. In series I, 20-mm straight steel fiber was added with a volume fraction of 0, 1.0, 1.3, 1.5 and 2.0%. In series II, 16-mm steel fiber was added with a volume fraction of 0, 1, and 1.5%, and then mechanical properties were examined according to aspect ratio. In the results of experiment, a difference in compressive strength was insignificant. However, regarding the flexural strength and tensile strength, as the volume fraction and aspect ratio increased, flexural performance and tensile performance improved.
권영남,최중구,김종호,탁태문 한국막학회 1998 멤브레인 Vol.8 No.4
국내 정수장.수도전.간이상수도등 2000여 곳의 수질을 환경부가 검사한 결과, 지역별로 세균.무기 이온등 몇몇 항목에서 환경기준을 초과한 것이 밝혀졌다. 이중에서 문제가 되고 있는 질산성 질소.암모니아성 질소.불소.염소등의 농도를 임의로 조작한 후, 시중에 유통되고 있는 가정용 정수기 모듈로 정수처리시켰을 때의 효과와 지역별로 문제시되는 항목들을 효과적으로 제거하기 위한 적당한 분리막을 선정하고자 측정 검토하였다. 정수처리하여 얻은 투과수를 일정 온도 하에서 보관하고, 일정 시간마다 세균수를 측정하여 세균수와 온도 및 시간과의 관계를 측정 조사함으로써 막 사용을 좀 더 효율적으로 할 수 있게끔 검토하였다. Recent data from Environmental department show that some out of 2,000 places surveyed are contaminated by nitrate, ammonia, fluoride, chloride and so forth in excess of the environmental standard-including purification plants, water taps, small water supply systems. In this study, some items which exceed drinking water standard were chosen and their concentrations were made varying from around standard level to around detected maximum concentration. After they permeated through the membrane module sold in the domestic market and made for household water-purifier, the most suitable membranes were selected according to individual water quality of various regions. In addition, the bacterial growth after storage for various days and under various temperatures was examined for the purpose of the effect of the time and temperature on bacterial growth.
불균일계 술폰화에 의한 한외여과용 폴리에테르 술폰 막소재 합성과 fouling 감소효과
김인철,최중구,최남석,김종호,탁태문 한국막학회 1998 멤브레인 Vol.8 No.4
Fouling을 줄이기 위한 한외여과용 친수성 막을 제조하기 위해서 chlorosulfonic acid(CSA)를 사용하여 이온교환용량이 다른 여러 종류의 sulfonated polyethersulfone(SPES)을 불균일계에서 제조하고 특성조사를 하였다. CSA농도, 반응온도, 반응시간 등의 반응조건에 따른 반응도와 분해정도를 알아본 결과 10℃ 이상의 온도와 0.05 mol 이상의 CSA 농도에서 효과적으로 반응이 일어나지만 고분자 주쇄의 분해가 심하게 일어나는 경향을 나타내었다. 술폰산기의 치환여부는 FTIR과 1H-NMR로 확인할 수 있었다. 불균일계에서 개질된 SPES 한외여과막의 단백질에 의한 fouling 감소효과를 알아보기 위해 같은 투과성능을 갖는 막을 비용매인 DCM과 pore 형성제 PVP를 첨가제로 사용하여 막을 제조하였다. 이온교환용량이 증가함에 따라 투과속도는 감소하고 배제율은 상당히 증가되었다. 이런 결과는 SEM에 의해서도 확인할 수 있었다. Finger 구조가 사라지면서 top layer의 두께도 증가하였다. 비용매인 DCM에 의해서 치밀한 막을, pore 형성제인 PVP에 의해서 다공성 막을 제조할 수 있었다. 이온교환 용량이 높을수록 친수성이 증가하여 fouling을 감소시킬 수 있었다. Sulfonated poly(ether sulfone)(SPES) of various ion exchange capacity (IEC) was prepared by heterogeneous sulfonation with chlorosulfonic acid (CSA) to make hydrophilic ultrafiltration membrane for reducing fouling. The effects of CSA concentration, reaction temperature and reaction time has been investigated. The reaction was effective when the temperature is above 10℃ and the CSA concentration is over 0.05 mol, although polymer chain has been significantly degraded. The substitution of sulfonic acid groups was characterized by FTIR and 1H-NMR. Transport properties and fouling test have been conducted to the modified SPES ultrafiltration rnembranrs by heterogeneors method. Membranes were obtained using DCM and PVP as a non-solvent and pore forming agent, respectively. Flux reduced and rejection increased with ion exchange capacity. Finger-like structure was disappeared and the thickness of top layer was increased. Dense membrane by non-solvent DCM and porous membrane by pore forming agent PVP was prepared. Fouling was reduced with increasing ion exchange capacity because of hydrophilicity.