http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
IEC 62765-2 원전 안전관련 온도센서의 경년열화 국제표준 개발
주운표(Oon-Pyo Zhu),김복렬(Bok-Ryul Kim),고정수(Jung-Soo Koh),박성백(Sung-Baek Park) 표준인증안전학회 2016 표준인증안전학회지 Vol.6 No.4
원전 안전관련 온도센서인 측온저항체(RTD) 및 열전대(TC)에 관한 경년열화관리의 IEC 62765-2는 제3수준의 IEC TC/SC 45A 기술문서이다. 이 논문은 원전종사자들에게 동 주제에 대한 직관을 줄 의도로 작성하였다. 이 국제표 준의 목표는 원전 온도센서의 경년열화로 인한 원전에 잠재적인 영향을 확인하고, 이 표준에서 제시하는 최소한 요건을 만족하고 있음을 확증하는 적합한 조치를 수행하여 원전의 안전성을 확보하도록 하였다. 본 논문은 RTD 및 TC의 경년 열화관리 단계 중 온도 교정 허용오차를 포함한 성능검증단계에 초점을 맞추었다. This paper is intended to give an insight operators of NPPs (utilities), systems evaluators, and by licensors. This IEC 62765-2 is the third level IEC SC45A document tackling the specific issue of management of aging of temperature sensors in nuclear power plants for I&C systems important to safety. The standard identifies minimum requirements aimed at ensuring that any potential impacts on NPP safety due to ageing of temperature sensors of NPP can be identified and that suitable actions are undertaken to demonstrate that the safety of the plant will not be impaired and to meet the requirements as described in the standard. This paper focused on the performance verification with the specifed calibration tolerance in the process of ageing management of RTD and thermo-couple.
대규모 원전 건설에 따른 과도 안정도 해석 · 신고리1호기 중심
주운표(O.P. Zhu),김복렬(B.K. Kim),이상근(S.K. Lee),오성균(P.S. Oh),김건중(K.J. Kim) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.11
본 논문에서 개발된 TSDAP(Transient Stability Dynamic Analysis Program)을 이용하여 신고리1호기 건성에 따른 과도 안정도 해석을 수행하였다. 개발된 TSDAP과 PSS/E프로그램을 비교하여 프로그램의 유용성을 입증하였고, 2011년 765㎸건설지연에 따라 임시로 운용되는 345㎸ 송전망의 과도 안정도를 살펴보았다.
실내 라돈환경계의 선량감도분석에 의한 제어매개변수 모델링
주운표,장시영,김건중 대한방사선 방어학회 1991 방사선방어학회지 Vol.16 No.2
라돈 및 붕괴생성물*의 호흡에 의한 인체 피폭선량의 제어가능성을 찾기 위해 다음과 같은 과정을 거쳤다. 1) 라돈에 관련된 기존모델을 토양 기공모델, 실내붕괴 모델, 폐선량계산모델로 분류해석하고, 2) topology이론에 따라 물리유추개념으로써 회로망으로 전환하여, 라돈환경계통을 정식화, 검증계산을 거쳐, 3) 모의계산으로 선량감도를 분석하여 최적매개변수의 범위를 모색하였다. 매개변수인 환기율, 침적율, 부착율가 제어범위내 변화될 때, 정식화된 111원 연립방정식의 해를 구하여 선량감도를 분석하였으며, 제어매개변수의 선량감도에 의한 효과를 3차원으로 도식화하였다. 본 연구 수행결과, 제어매개변수 변화에 따른 실내의 222Rn 및 Rn-D*의 농도 변화과정은 새롭게 해석할 수 있는 벡터감도단층모형으로, 일부 제어매개변수의 조합변화에 따른 선량감도는 3차원 그래프모형으로 나타낼 수 있었다. 선량감도의 3차원 그래프에서는 실내환경의 대표적 매개변수 값 범위에서 변곡점이 나타났으며, 일반적으로 높은 환기조건(>h-1)하에서는 공기정화에 의하여 선량이 전반적으로 증가되나, 불충분한 환기조건(<0.5h-1)하에서는 공기정화에 의하여, 선량이 40%정도로 감소되는 것으로 나타났다. (라돈 및 붕괴생성물은 이하 222Rn 및 Rn-D로 통일한다.) This paper aimed to analyse dose sensitivity to the controllable parameters of indoor radon(222Rn) and its decay products(Rn-D) by applying the input-output linear system theory. Physical behaviors of 222Rn & Rn-D were analyzed in terms of 222Rn gas-generation, -migation and -infiltration to indoor environments, and the performance output-function, i.e. mean dose equivalent to Tracho-Bronchial(TB) lung region, was assessed to the following extented ranges of the controllable paramenters; a) the ventilation rate constant(λv): 0∼50[h-1]. b) the attachment rate constant(λa) : 0∼500[h-1]. c) the unattached-deposition rate constant(λ??) : 0∼50[h-1]. A linear input-output model was reconstructed from the original models in literatures, as follows, which was modified into the matrices consisting of 111 nodal equations ; a) indoor 222Rn & Rn-D Behaviour ; Jacobi-Porstendoerfer-Bruno model. b) lung dosimetry ; Jacobi-Eisfeld model. Some of the major findings, which identify the effectiveness of the model, were as follows. a) λv is most effective, dominant controllable parameters in dose reduction, if mechanical ventilation is applied, due to 222Rn gas removal effect. b) λa, depending on the air particle-concentration, reduces the dose somewhat within λv<1 h-1 range. However, the dose increases conversely, λv>1 h-1 range. c) λ?? reduces the dose linearly as λv does. Such dose(z-axis) senstivities could be understood with three-dimensional plots whose x,y-axes are combined 2 out of the 3 paramenters(λv, λa, λ??).
주운표(Oon-Pyo ZHU),김복렬(Bok-Yeol KIM),김남희(Nam-Hee KIM) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
2003년 8월14일 북미는 사상최대의 대정전 사고를 경험하였다. 입법과정을 통하여 전기신뢰도기구가 창설되고, 신뢰도 기준을 법제화하는 등 후속조치가 진행되었다. 미국 원자력규제기관은 송전망 관련사건 분석을 통해서 송전망사고가 점차 대형화되어, 소외전원 상실을 비롯한 발전소 교류전원상실이 안전을 위협할 수 있다는 것을 확인하였다. 비록 2003 대정전으로 인한 원전사고는 없었지만, 문제점을 인식하고, 원전연계요건을 포함한 원전-송전계통 사업자 조정 기준을 법제화 하여 원전안전성을 보장하도록 하였다. 이와 같이 변화된 규제환경 및 동향과 아울러 전기신뢰도 확보를 비롯한 원전의 안전성을 확보하는 최근 미국 규제기관의 노력을 확인하여 교훈을 얻고져 한다.
H_{\infty} Control Synthesis for Power System Design using LMI Optimization Method
정대원,주운표,김건중,Jeong, Dae-Won,Ju, Un-Pyo,Kim, Geon-Jung The Korean Institute of Electrical Engineers 2000 전기학회논문지 D Vol.49 No.4
This paper presents the application of H$\infty$ control synthesis using LMI optimization method to power system stabilizer(PSS) design. Since power system is usually operated under circumstance of unmeasurable uncertainties and external disturbances, the improvement of small signal stability becomes one of the most important issue for securing system stability and preventing low frequency oscillation phenomena. The LMI optimized H$\infty$ PSS provides robust performance and guarantees the internal stability under these operating conditions. The global optimal H$\infty$ norm is found using LMI convex optimization method which is more systematic than standard two Riccati solution method. The design results are simulated for a case study. We verified that the LMI method shows the best performance characteristic smong standard Riccati method and conventional lead/lag method.
IEC/IEEE 60780-323 국제표준의 개정 배경, 주요 내용 및 적용성 평가
김복렬(Bok-Ryul Kim),주운표(Oon-Pyo Zhu),고정수(Jung-Soo Koh) 표준인증안전학회 2016 표준인증안전학회지 Vol.6 No.3
2003년 몬트리올 IEC 총회에서 IEC와 IEEE 두 표준기관이 협력하여 동일 주제의 표준에 대해서는 이중 로고 사용을 합의하였다. 그 일환으로 기기검증 관련 표준인 IEC60780과 IEEE323을 단일 표준으로 제정하고 이중 로고를 사용하는 협력사업을 착수하였으며, 2016년 2월에 “원자력시설-안전성에 중요한 전기기기-검증”이라는 제목으로 최종 발간되었다. 이 표준은 원자력시설에 사용되는 안전성에 중요한 전기기기 및 관련 연계설비의 검증에 관한 기본요건, 즉 검증원칙, 검증 방법 및 절차 등을 규정하고 있다. 이 논문에서는 IEC 및 IEEE 기관의 협력 및 주요 개정내용과 규제 적용성을 평가한다. In 2003 IEC plenary meeting held in Montreal, both IEC and IEEE organizations agreed the use of dual logo on the standards of same subject. As part of collaboration, they launched the joint projects which establish a single standard harmonizing with IEC60780 and IEEE 323 related to equipment qualification and use dual logo, and finally published “Nuclear Facilities – Electrical Equipment Important to Safety – Qualification” in February 2016. This standard describes the basic requirements, say, principles, methods, and procedures for qualifying electrical equipment important to safety and interfaces that are to be used in nuclear facilities. This paper deals with the revision and major contents of IEC and IEEE joint projects and evaluates their effects on regulatory applicability.