http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Study on the CIGS thin film formation in CFM process
주명양,장옥결,전호영,한현규,류시옥 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
Thin film solar cells have been received the great attention for the second generation of photovoltaic cells because they have advantages including low processing cost, lighter weight, flexibility, and possible roll-to-roll process in comparison to the crystalline silicon-based solar cells. Cu(In,Ga)Se<sub>2</sub> (CIGS) thin film is one of the most promising candidates in the family of copper chalcopyrite materials for the photovoltaic application. Up to now, several methods such as sputtering, co-evaporation, electro-deposition, and spray pyrolysis have been reported for the formation of polycrystalline thin films of CIGS. In this study, the thin films of CIGS were prepared by CFM method. To investigate the annealing temperature effects, annealing temperature was varied from 200°C to 400°C.
주명양,류시옥,전호영,하철호 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
Thin film solar cells have been received the great attention for the second generation of photovoltaic cells because they have advantages including low processing cost, lighter weight, flexibility, and possible roll-to-roll process in comparison to the crystalline silicon-based solar cells. Cu(In,Ga)Se2 (CIGS) thin film is one of the most promising candidates in the family of copper chalcopyrite materials for the photovoltaic application. Up to now, several methods such as sputtering, co-evaporation, electro-deposition, and spray pyrolysis have been reported for the formation of polycrystalline thin films of CIGS. In this study, the thin films of CIGS were prepared by water based method. To investigate the annealing temperature effects, annealing temperature was varied from 200°C to 550°C.
연속흐름반응기를 이용하여 증착한 ZnS(O.OH) 박막의 열처리 온도에 따른 특 성 변화
전호영,주명양,한현규,류시옥 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
본 연구에서는 열처리 과정에서의 조건이 태양전지용 ZnS(O.OH) 박막의 광학적, 구조적, 그리고 물리적 성질에 미치는 영향을 알아보기 위하여 CIGS태양전지의 버퍼층으로 사용되는 ZnS(O.OH)박막을 저비용 용액공정중 성작속도 조절을 통해 최종 입자의 크기 혹은 박막의 두께 제어 그리고 대량생산에 용의한 CFR-Spray 방법을 이용해 증착을 한 후 열처리 온도를 변화시키며 실험을 수행하였다. X-ray Diffraction(XRD), Scanning electron microscope, UV-visvibel spectrophotometry를 이용하여 온도 변화에 따른 밴드겝 에너지와 박막표면의 구조형태, Zn, O 그리고 S의 구성비율이 변하는 것을 분석하며 열처리 과정에 따른 ZnS(O.OH)의 특성변화를 확인하였다.
CFR-spin coating process을 이용한 ZnO 나노구조 특성 평가
강태훈,전호영,주명양,하철호,류시옥 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.0
Zinc oxide(ZnO)는 넓은 bandgap(3.37eV)과 실온에서 60meV의 높은 excitation binding energy를 가진다. 또한, 가시 광 영역에서 투명하고 저항범 위 10-3~105Ω·cm에서 제어가 가능한 높은 전기화학적 안정성이 있으며 무독 성이기 때문에 많은 연구가 진행되고 있다. ZnO의 반도체적 성질을 이용하여 단파 장 장치, 자외선 레이저, 박막형 가스 센서, 태양전지 그리고 착용 가능한 장치 등 많은 응용이 가능하다. 본 연구에서는 용액공정을 기반으로 continuous flow reactor(CFR), spin coating 방법을 이용하여 flower-like, chrysanthemumlike, tree-like 그리고 thin films의 다양한 ZnO 나노구조를 합성했다. ZnO의 특성에 영향을 주는 흐름속도, 열처리 온도, pH, 반응시간, 전구체 농도 등을 조절 하여 특성변화를 XRD, SEM, EDX, UV-vis spectroscopy, XPS를 이용하여 확 인했다.