http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
자유도 향상을 위한 무선충전 영역 확장과 공간 무선충전 기술
김성민(Seong-Min Kim),조인귀(In-Kui Cho) 대한전기학회 2020 전기의 세계 Vol.69 No.7
최근 무선전력전송의 자유도를 향상시키기 위한 다양한 기술이 개발되고 있다. 본 고에서는 이러한 무선전력 자유도 확보를 위한 전송 영역 확장 및 공간 무선충전 기술에 대해 기술하였다. Recently, various technologies have been developed to improve the freedom of wireless power transmission. In this paper, we describe the transmission area expansion and spatial wireless charging technology to secure the freedom of wireless power.
자기공명 무선전력전송용 100 W급 수신기 설계 및 제작
김성민(Seong-Min Kim),조인귀(In-Kui Cho),최현철(Hyun-Chul Choi) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.1
본 논문에서는 자기공명 방식의 무선전력전송 시스템용 100 W급 수신기를 설계, 제작하였다. 제안된 수신기는 1.8MHz 대역, 100 W급 full-bridge 다이오드 정류기와 정전류 충전기로 구성되어 있다. 특히 정류기에는 30 V 이상의 과전압으로부터 수신기를 보호하는 과전압 보호회로와 수신기에 입력되는 여분 전력을 자동으로 소모하여 수신기의 임력임피던스를 부하변동에 관계없이 일정하게 유지시키는 능동 더미 부하가 내장되어 있다. 정전류 충전기는 최대 1 A의 충전전류로 배터리를 충전할 수 있도록 설계, 제작되었으며, 충전전류를 제어할 수 있도록 구성되었다. 구성된 수신기를 이용하여 자기공명방식 무선충전 시스템을 구성하였다. 시스템은 130 W 송신기, 1.8 MHz 대역 송수신 공진기, 그리고 제안된 수신기로 구성되어 있으며, 자기공명방식으로 48 V 리튬-이온 배터리를 충전하도록 설계되었다. 시스템 측정 결과, 30 cm의 전송거리에서 약 54 %의 시스템 효율을 나타내었다. In this paper, a receiver for wireless power transfer is proposed. The receiver consists of a 100 W rectifier in 1.8 MHz frequency band, and a constant current charger. In particular, two kinds of protection circuits are installed in the rectifier. They are a over-voltage protection circuit which block the input voltages greater than 30 V and a active-dummy load which maintains the receiver input impedance by automatically consuming the remaining input power. The constant current charger is designed to charge the battery with a charging current of up to 1 A. A wireless charging system is fabricated using the proposed receiver. The system is composed of a 130 W transmitter, two magnetic resonator, and proposed receiver for charging a 48 V Li-Ion battery using the coupled magnetic resonance method. By the measurement result, the system efficiency is about 54 %.