http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2-브로모메틸-1,4-벤조다이옥산을 이용한 2-에티닐피리딘의 4차염화 중합에 의한 이온성 폴리아세틸렌 유도체
제갈영순 ( Yeong-soon Gal ),진성호 ( Sung-ho Jin ),박종욱 ( Jongwook Park ) 한국화상학회 2023 한국화상학회지 Vol.29 No.4
벤조다이옥산 기능기를 갖는 새로운 이온성 폴리아세틸렌 유도체를 2-브로모메틸-1,4-벤조디옥산을 이용한 2-에티닐피리딘의 4차염화 중합법으로 합성하였다. 2-브로모메틸-1,4-벤조디옥산에 의한 2-에티닐피리딘의 4차염화반응에 의해 먼저 생성된 단량체인 에티닐피리디늄 염은 별도의 촉매나 개시제 없이도 중합반응이 잘 진행되어 70% 수율로 원하는 이온성 폴리아세틸렌 유도체를 합성할 수 있었다. 여러 가지 분석장비를 이용하여 고분자 구조를 분석한 결과 합성 고분자는 벤조디옥산 피리디늄 부분을 갖는 공액구조 고분자임을 확인할 수 있었다. 합성공액구조 고분자는 메탄올, DMF, DMSO, NMP 등과 같은 극성 유기 용매에 잘 용해하었다. 이 고분자는 이온성 피리디늄 부분을 갖고 있는 특성으로, 공기 중에서 상대적으로 더 많은 흡습 특성을 보였다. 합성한 고분자의 전기-광학적 및 전기화학적 특성을 측정하고 분석하였다. 비가역적 전기화학적 거동이 산화 피크와 환원 피크 사이에서 관찰되었다. 본 고분자는 피리디늄 치환기를 갖는 다른 폴리아세틸렌 유도체와 비슷하게 50 사이클까지 안정적인 산화환원 거동과 1.0V에서의 안정한 산화전류값을 나타내었다. A new ionic polyacetylene derivative with benzodioxane moieties as a substituent was prepared via the in-situ quaternization polymerization of 2-ethynylpyridine using 2-bromomethyl-1,4-benzodioxane. The polymerization of monomeric ethynylpyridinium salts, which were formed by the firstly quaternization of 2-ethynylpyridine using 2-bromomethyl-1,4-benzodioxane, proceeded well to provide the corresponding polyacetylene derivative in 70% yield. The polymer structure was characterized by various instrumental methods to have the conjugated polymer backbone system with the benzodioxane pyridinium moieties. This ionic conjugated polymer was soluble in polar organic solvent such as methanol, DMF, DMSO, NMP, etc. This polymer had an ionic pyridinium moieties, it showed relatively more hygroscipic properties in air. The electro-optical and electrochemical properties of the resulting polymer were measured and discussed. The irreversible electrochemical behaviors were observed between the oxidation and reduction peaks. The present polymer exhibited stable redox behavior up to 50 cycles and a steady oxidation current at 1.0V, similar to other polyacetylene derivatives with pyridinium substituents.
WCI6-EtAICI2 촉매에 의한 폴리(페닐아세틸렌)의 합성과 전자-광 및 전기화학적 특성연구
제갈영순 ( Yeong Soon Jae Gal ),진성호 ( Sung Ho Jin ),장상희 ( Sang Hee Jang ),임권택 ( Kwon Taek Lim ) 한국화상학회 2011 한국화상학회지 Vol.17 No.3
WCl6-EtAlCl2촉매계를 이용하여 비교적 큰 분자량을 갖는 폴리(페닐아세틸렌)을 합성하였다. 중합반응이 잘 진행되었으며 중합수율은 81%였다. 합성한 폴리(페닐아세틸렌) 분자구조를 NMR (1H-,13C-),IR,UV-visible,원소분석 등으로 분석한 결과 페닐 치환기를 갖는 공액구조 고분자가 합성되었음을 확인할 수 있었다. 아울러 332 nm의 빛으로 여기시킬 경우 PL 최대 peak는 424 nm에서 관찰되었는데, 이는 2.93 eV의 광 에너지에 해당한다. 이 고분자의 순환 전압전류 그림은 도핑과 탈도핑사이에서 비가역적인 전기화학적 거동을 보여주었다. 이 고분자의 전기화학적 과정이 매우 안정하였으며, 스캔속도에 따른 산화전류밀도 실험으로부터 이 고분자의 산화-환원 과정은 확산-제어과정에 따르는 것으로 분석되었다. Poly(phenylacetylene) with relatively high molecular weight was prepared by using WCl6-EtAlCl2catalystsystem.This polymerization proceeded well in the mild reaction condition to give a high yield of polymer (polymer yield: 81 %). The chemical structure of poly(phenylacetylene) was characterized by such instrumental methods as NMR (1H-,13C-),IR,UV-visiblespectroscopies,andelementalanalysistohavetheconjugatedpolymerbackbonebearingphenylsubstituents. The photoluminescence maximum peak of polymer was located at 424 nm, which corresponds to the photon energy of 2.93 eV. The cyclovoltammograms of poly(phenylacetylene) exhibited the electrochemically stable window at the -1.5 ~ +1.5 V region. The kinetics of the redox process of poly(phenylacetylene) was found to be mainly controlled by the reactant diffusion process based on the experiment of the oxidation current density of polymer versus the scan rate.
디일렉트로메트리법을 이용한 두꺼운 케블라/에폭시 프리프레그의 경화거동 연구
제갈영순 ( Je Gal Yeong Sun ),진성호 ( Jin Seong Ho ),이원철 ( Lee Won Cheol ),윤남균 ( Yun Nam Gyun ) 한국공업화학회 2003 공업화학 Vol.14 No.7
경화중 이중극자의 배향 및 이온이동도와 수지의 점도와의 상관 관계를 이용하여 경화거동을 연구할 수 있는 마이크로 디일렉트로메트리법을 이용하여 두꺼운 케블라/에폭시 프리프래그의 경화거동을 연구하였다. 케블라/에폭시 프리프레그 150층을 적충한 프리폼에 센서를 잠입시킨 후 경화주기에 준하여 승온시키면서 이들의 이온점도 거동을 관찰하였는데, 입력주파수에 따라 약간의 차이는 있으나 91~105 ℃의 범위에서 최소점도값을 보였다. 또한 약 100 ℃에서 최대 전도도값을 보여주었다. 두꺼운 케블라/에폭시 프리프레그의 경화거동은 얇은 케블라/에폭시 프리프레그의 그것과 유사하였다. 특히 본 두꺼운 케블라/에폭시 프리프레그의 경우에는 내부에서 설정한 경화온도보다 훨씬 높은 온도를 보이는 overshoot현상은 보이지 않았다. The studies on the curing behaviors of thick Kevlar/epoxy prepreg were performed by microdielectormetry method, which uses the correlation of the orientation of dipole and the ion mobility with the viscosity of resins during cure. The lowest ionic viscosities of 150 plies Kevla/Epoxy prepregs according to the curing cycle were observed in the range of 91-105℃, depending on the input frequencies. The maximum conductivity was also observed at about 100℃. The curing behaviors of thick Kevaler/epoxy prepreg was found to be similar with that of the same thin prepreg. The overshoot phenomenon was not observed in the present thick Kevlar/epoxy prepreg.
아세틸렌 기능기를 갖는 플로렌 유도체들의 열반응 특성에 관한 연구
제갈영순 ( Yeong Soon Gal ),진성호 ( Sung Ho Jin ),이원철 ( Won Chul Lee ),이효산 ( Hyo San Lee ),김상을 ( Sang Youl Kim ) 한국공업화학회 2002 공업화학 Vol.13 No.7
디프로파길 플로렌(DPF) 및 그 유도체(DPF-Br, DPF-Ac, DPF-NO_2)들을 phase transfer catalyst인 NaOH/triethylbenzylammonium chloride을 사용하여 플로렌 및 그 유도체와 프로파길 브로마이드의 반응으로부터 합성하였다. 아세틸렌 기능기를 갖는 4종의 플로렌 화합물의 열반응 특성을 시차주사열분석기와 열중량분석기를 사용하여 분석하였다. DPF인 경우 대부분의 시료가 비교적 낮은 온도에서 휘발함을 알 수 있었다. 반면에 플로렌의 2-위치에 치환기를 갖는 DPF-Br, DPF-Ac, DPF-NO_2와 같은 DPF 유도체들은 200 ℃ 이상의 온도에서도 원시료 무게의 대부분을 유지하였다. 700 ℃까지 승온시킨 후 남은 잔사량은 DPF, DPF-Br, DPF-Ac, DPF-NO_2의 경우 각각 7.37%, 27.93%, 41.19%, 그리고 60.26%였다. Dipropargylfluorene (DPF) and its derivatives (DPF-Br, DPF-Ac, and DPF-NO_2) were prepared by the reaction of fluorenes and propargyl bromide under the conditions of aqueous NaOH/triethylbenzylammonium chloride in high yields. The thermal reaction properties of four fluorene derivatives having acetylenic functionality were studied by using the differential scanning calorimeter and thermogravimetric analyzer. A major part of DPF was evaporated from the open sample cell at a relatively low temperature in the TGA experiment. On the other hand, such DPF derivatives as DPF-Br, DPF-Ac and DPF-NO_2, which contain the substituent at 2-position of fluorene, retained its original weights even at the temperature above 200 ℃. After heating up to 700 ℃, the final char yields of DPF, DPF-Br, DPF-Ac and DPF-NO_2 were 7.37%, 27.93%, 41.19%, and 60.26%, respectively.
Poly(9,9-dipropargylfluorene)의 합성과 광학적 특성
제갈영순 ( Yeong Soon Gal ),이완직 ( Wan Jik Yi ),진성호 ( Sung Ho Jin ) 부산대학교 과학교육연구소 2008 교사교육연구 Vol.47 No.1
플로렌 치환기가 도입된 폴리(디프로파길플로렌) 고분자를 몰리브데, 팅스텐 및 로디움 계열의 전이금속 촉매를 사용한여 합성하였다. 특히 폴리(디프로파길폴로렌) 고분자를 로디움 계열의 촉매를 사용하여 처음으로 합성을 하였다. 합성되어진 고분자는 NBR과 IR 분광기로 구조분석을 하였으며 일반적인 유기용매에 잘 녹았다. 고분자의 열적특성도 연구하였다. A fluorene-containing spiro-type conjugated polymer, poly (dipmpargylfluorene), was synthesized via the cyclopolymerization of dipropargylfluorene by Mo-, W- and Rh-based transition-metal catalysts. This is the first report for the synthesis of poly (9, 9- dipropargylfluorene) by Rh-based cyclopolymerization. The Mo-based catalysts are more effective than those of W- and Rh-based catalysts. The structure of poly (dipropargylfluorene) was characterized by various instrumental methods (NMR and fit spectmscopy) to have the conjugated polymer backbone carrying fluorene moieties. The resulting poly (dipropargylfluorene) s were brown or black powder and soluble in aromatics and halogenated hydrocarbons such as benzene, chlorobenzene, tetrahydrofuran, chloroform, and methylene chloride. Thermal and morphological properties of the polymer are also discussed.