http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PC의 진동/소음 저감을 위한 쿨링팬의 동흡진장치 개발
정원영(Wonyoung Jung),정진태(Jintai Chung) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
The purpose of this study is to reduce the vibration of the computer by developing the vibration absorber and damper. The eccentricity of the cooling fan causes the vibration of the computer. We designed the material properties of the vibration absorber by FEM model within operation frequencies of the cooling fan. We experiment the overall analysis and system analysis. The vibration of cooling fan is measured by using a laser vibrometer. The result shows that the proposed vibration absorber and damper reduce the vibration of the computer.
개인용 정보 단말장치를 위한 내장형 멀티스레딩 프로세서 구조
정하영(Hayoung Jeong),정원영(Wonyoung Chung),이용석(Yong-surk Lee) 大韓電子工學會 2010 電子工學會論文誌-SD (Semiconductor and devices) Vol.47 No.9
본 논문은 스마트폰, 타블렛 PC와 같은 개인용 정보 단말장치 응용에 적합한 프로세서 구조를 제안한다. 고성능 내장형 프로세서 개발은 아키텍쳐의 변화가 필요하고, 오버헤드가 크기 때문에, 업계에서는 높은 동작 주파수의 고성능 내장형 프로세서의 개발에 전념하고 있다. 고성능 프로세서 구조 중 비순차 슈퍼스칼라(out-of-order superscalar)는 하드웨어 복잡도가 과도하게 증가하며, 그에 비해 성능 향상이 적으므로 내장형 응용에 적합하지 않다. 따라서 하드웨어 복잡도가 낮은 고성능 내장형 프로세서 구조의 개발이 필요하다. 본 논문에서는 스칼라, 슈퍼스칼라, 멀티프로세서 방식에 비하여 복잡도가 낮은 새로운 SMT(Simultaneous Multi-Threading) 구조를 제안한다. 최근의 개인용 정보단말기는 많은 작업을 동시에 수행하기 때문에, SMT나 CMP는 이에 적합한 구조라 할 수 있다. 또한, 시뮬레이션 결과 SMT는 여러 프로세서 구조 중 가장 효율이 높은 프로세서로 보인다. In this paper, we proposed a processor architecture that is suitable for next generation embedded applications, especially for personal information devices such as smart phones, tablet PC. Latest high performance embedded processors are developed to achieve high clock speed. Because increasing performance makes design more difficult and induces large overhead, architectural evolution in embedded processor field is necessary. Among more enhanced processor types, out-of-order superscalar cannot be a candidate for embedded applications due to its excessive complexity and relatively low performance gain compared to its overhead. Therefore, new architecture with moderate complexity must be designed. In this paper, we developed a low-cost SMT architecture model and compared its performance to other architectures including scalar, superscalar and multiprocessor. Because current personal information devices have a tendency to execute multiple tasks simultaneously, SMT or CMP can be a good choice. And our simulation result shows that the efficiency of SMT is the best among the architectures considered.
정하영(Hayoung Jeong),정원영(Wonyoung Chung),이용석(Yong-surk Lee) 한국통신학회 2011 韓國通信學會論文誌 Vol.36 No.1
본 논문에선 분산 메모리 아키텍처를 사용하는 멀티프로세서 시스템에서 메시지 전달을 지원하는 하드웨어 MPI(Message Passing Interface) 유닛을 설계하였다. 데이터 전송 동기화 및 데이터 전송, 완료까지의 과정을 하드웨어 MPI 유닛이 담당하여 동기화에 따른 오베헤드를 경감시켰다. 또한 동기화 메시지를 저장 관리하는 요청큐(Request Queue), 준비 큐(Ready Queue), 예약 큐(Reserve Queue)를 내장하여 병렬적으로 입력받은 동기화 메시지를 관리하고 비순차적 종료(out of order completion)을 지원한다. BMF(Bus Functional Medel)을 제작해 제안한 구조에서의 전송 대역폭 성능을 확인한 결과 다대다 통신에서 25%이상의 성능 향상이 있음을 확인할 수 있었다. 그후 HDL로 기술된 하드웨어를 Magnachip 0.18 공정 라이브러리에서 합성하였으며 프로토 타입 chip으로 제작하였다. 제안한 MPI 유닛은 전체 칩 사이즈의 1%이하의 크기로 높은 성능 향상을 기대할 수 있어, 저비용 설계와 확장성 측면에서 임베디드 MPSoC(Multi-Processor System-on-Chip)의 전체적인 성능을 높이는데 유용하다. In this paper, we propose a novel hardware MPI(Message Passing Interface) unit which supports message passing in multiprocessor system which use distributed memory architecture. MPI Hardware unit processes data synchronization, transmission and completion, and it supports processor non-blocking operation so it reduces overhead according to synchronization. Additionally, MPI hardware unit combines ready entry, request entry, reserve entry which save and manage the synchronized messages and performs the multiple outstanding issue and out of order completion. According to BFM(Bus Functional Model) simulation result, the performance is increased by 25% on many to many communication. After we designed MPI unit using HDL, with synopsys design compiler we synthesized, and for synthesis library we used MagnaChip 0.18㎛. And then we making prototype chip. The proposed message transmission interface hardware shows high performance for its increase in size. Thus, as we consider low-cost design and scalability, MPI hardware unit is useful in increasing overall performance of embedded MPSoC(Multi-Processor System-on-Chip).
진동신호를 이용한 LCD 반송로봇의 상태감시 파라미터 선정
장준혁(Jun Hyuk Jang),정원영(Wonyoung Jung),이규호(Kyu Ho Lee),정진태(Jintai Chung) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.12
본 연구의 목적은 LCD 공정에서 사용되는 반송로봇의 상태감시 파라미터를 선정하고 이를 이용하여 상태감시 방법을 제안하는데 있다. LCD 반송로봇의 주행부 진동특성을 파악하기 위하여 주행부 감속기의 기어물림주파수(GMF)를 구하고, 주파수분석을 통해 이를 확인하였다. 취득데이터의 재연성을 확보하기 위하여 데이터 취득 운행 패턴을 선정하고 실험을 통해 재연성을 확인하였다. 무선데이터 취득 시스템을 구축하고 이를 이용하여 반송로봇의 상태를 감시하기 위한 기어물림 주파수를 중심으로 파라미터로 선정하였다. 취득된 데이터의 표준편차를 이용하는 상태감시 방법과 진폭의 배수를 이용하는 상태감시 방법을 제안하였다. The purpose of this study is to perform parameter selection and develop a method for the condition monitoring of an LCD conveyance robot. To determine the vibration characteristics of the driving part of the robot, the gear mesh frequency (GMF) of the speed-reducing gearbox is calculated and confirmed by frequency analysis. In order to ensure reproducibility of the measured data, an appropriate working pattern is selected and experiments are carried out. For condition monitoring of the robot, a wireless measurement system is constructed and used in parameter selection, with the GMF as the center. A method involving the use of the standard deviation of the measured data and another method involving the use of multiple value of amplitude are proposed.
진동신호를 이용한 LCD 반송로봇의 상태감시 파라미터 선정
장준혁(Jun Hyuk Jang),정원영(Wonyoung Jung),이규호(Kyu Ho Lee),정진태(Jintai Chung) 대한기계학회 2011 대한기계학회 춘추학술대회 Vol.2011 No.5
본 연구의 목적은 LCD 공정에서 사용되는 반송로봇의 상태감시 파라미터를 선정하는데 있다. LCD 반송로봇의 주행부 진동특성을 파악하기 위하여 주행감속기의 기어물림주파수(GMF)를 구하고, 신호분석을 통해 이를 검증하였다. 각 실험간의 환경을 일체화 하기 위하여 반송로봇의 운행방향과 속도를 동일하게 제어하였다. 반송로봇의 상태를 감시하기 위하여 기어물림주파수를 중심으로 파라미터 선정하였다. The purpose of this study is to select a parameter for condition monitoring for LCD conveyance robot. In order to get the vibration characteristics of driving part of LCD conveyance robot, calculate the gear meshing frequency(GMF) of the speed reducer gearbox and perform the signal analysis to verify the GMF of gearbox. To adjust the experimental condition, LCD conveyance robot is operated in the same direct ion and speed and. Parameter is selected with GMF as the center to check the condition of the robot.