http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이태진,김장희,박영우,김기석,박노국,이창근 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.4
복합금속산화물인 zinc ferrite와 zinc titanate 탈황제를 사용하여 석탄가스에서 H₂S의 제거 가능성을 연구하였다. 고온가스에 함유한 H₂S와 탈황제의 반응에 있어서 최적반응온도를 찾기 위해서 500-750℃ 범위에서 조사하였으며, 실험결과 zinc ferrite와 zinc titanate의 H₂S제거 효율은 각각 550℃와 650℃에서 최적조건을 나타내었다. 또한 SEM과 BET분석을 통해서도 최적온도에 대한 입자의 특징을 확인할 수 있었다. 황화-재생의 연속반응 10-cycle실험은 탈황제의 연속적인 사용가능성을 평가하기 위해서 충전층 반응기에서 수행하였으며 표본시료에 대한 BET표면적, XRD, SEM등의 분석도 같이 수행하였다. 황화-재생반응의 cycle이 반복되는 동안 zinc ferrite는 탈황제의 화학적 변형으로 인해서 황수용 능력이 증가하는 특이한 결과가 나타났으며, zinc titanate는 연속적인 cycle에서 거의 일정한 황수용 능력을 보였다. Removal of H₂S by mixed-metal oxides was studied experimentally to demonstrate the potential use of zinc ferrite and zinc titanate as a sorbent in high temperature desulfurization of coal gas. To find optimal temperature, the reactions of sorbents with a hot gas containing H₂S were investigated over a temperature range of 500-750℃. The experimental results showed that optimal H₂S removal efficiency of zinc ferrite and zinc titanate sorbents was obtained at 550℃ and 650℃ respectively, and SEM and BET analyses were in accord with this feature. Ten cycles of sulfidation and regeneration were sequentially conducted in the packed-bed reactor to determine the long-term performance of the sorbents. A series of characterizations were also performed sample including BET surface area, XRD, and SEM. Zinc ferrite sorbent exhibited a significant rise in sulfur capacity during the repeated cycles of absorption and regeneration due to the chemical transformations of the sorbent, while zinc titanate sorbent showed nearly constant sulfur capacity with the successive cycle operation.