http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승평,김길무,조만형,허남관 대한금속재료학회(대한금속학회) 1974 대한금속·재료학회지 Vol.12 No.4
탈수한 황산동의 해리반응은 비교적 고온에서 염기성 황산동을 형성하면서 진행되지만, Cu-O-S-C 체제하에서는 염기성 황산동을 형성하지 않고 배소시킬 수 있다는 것을 알았다. 목탄탄소를 첨가시킨 무수황산동을 배소 시킨 결과 500℃∼600℃ 온도구간에서 충분한 반응속도를 나타냈으며 배소물로써 탈황율이 높은 Cu₂O를 얻었다. 무수황산동 배소에 필요되는 열량은 323㎉/㎏ CuSO₄, 즉 720㎉/㎏ Cu₂O였다. Decomposition reaction of the dehydrated cupric sulphate was carried out at relatively elevated temperatures because of the formation of basic cupric sulphate, but it was found that under the Cu-O-S-C system anhydrous cupric sulphate could be roasted without formation of basic cupric sulphate. As the result of roasting anhydrous cupric sulphate mix charcoal carbon, mast reaction was carried out at the satisfactory reaction rate at between temperature 500℃ and 600℃ and cuprous oxide, which is high in desulphurizing as the roasted, was formed. The energy required for roasting anhydrous cupric sulphate was 323㎉/㎏ Cu₂SO₄; 720㎉/㎏ Cu₂O.
이원해,이승평 대한금속재료학회(대한금속학회) 1971 대한금속·재료학회지 Vol.8 No.4
진해조는 가운데를 cell의 저면에는 닿지 않고 Bi-amalgam에만 닿도록 격막으로 막은 두개의 compartment로 되어 있어서 Bi-amalgam은 자유로이 다닐 수 있으나 전해액은 한쪽에서 다른쪽으로 다니지 못하게 하였다. stirrer로 교만하고 있는 Bi-amalgam의 한쪽은 anode로, 다른쪽은 cathode로 작용하도록 하였다. refining solution으로 사용한 전해액의 성분은 Bi(ClO₄)₃와 HClO₄이며, Cathode 전류 밀도는 5A-15A/dm²가 가장 좋았고, 전류 효율은 100%였다. 98% Bi를 사용하여 amalgam refining을 해본 결과 5-9s보다 더 순수한 Bi를 얻을 수 있었다.
이원해,이승평 대한금속재료학회(대한금속학회) 1971 대한금속·재료학회지 Vol.9 No.3
전해조는 가운데를 밑면에 닿지 않게 격막으로 막아 두 부분으로 나누고 밑면에 Zn-amalgam을 채워 amalgam은 양쪽실을 다닐 수 있으나 전해액은 한쪽에서 다른쪽으로 다니지 못하게 하였다. amalgam은 자석교반기로 교반하고 한쪽은 음극 다른쪽은 양극으로 작용하도록 하였다. 전해액은 황산아연용액을 쓰고 완충제로 식초산염을 사용하여 99%의 조아연을 전해정제하여 5-9s 이상의 아연을 얻었다. Crude Zinc metal was electrorefined using electrolytic cell which consists of two compartments separated by a barrier that is immersed in a shallow pool of zinc amalgam without reaching the cell bottom. The amalgam, agitated with stirrer, acts as a cathode on one side and an anode on the other side. ZnSO₄ solution buffered with acetate was used as the refining solution. The current efficiency was 99.0% at pH 4.5. The electrorefining by using 99% Zn resulted in obtaining>5-9s.
고창식,이승평 대한금속재료학회(대한금속학회) 1968 대한금속·재료학회지 Vol.6 No.2
E.m.f measurement was carried out to study the lead-antimony binary system which forms a basic mechanism of Sb behavior in liquid Pb. As a part of the fundamental study in softening or fire refining, thermodynamic function, i.e., ΔFi, ΔF, Li, ΔH, ΔS were determined also by this study. Activity curve of respective component of lead and antimony shows small negative deviation from ideality at 475℃. However, according to lowering the temperature activity coefficient seemed to be slowly increased in Pb rich side composition, and slightly decreased in Sb rich side composition. Furthermore, it should be studied to determine the activity of this liquid Pb rich alloy more than Npb 0.90.
이원해,고창식,이승평 대한금속재료학회(대한금속학회) 1971 대한금속·재료학회지 Vol.9 No.1
전해조는 가운데를 cell의 지면에는 닿지않고 Bi-amalgam에만 닿도록 격막으로 막은 두 개의 compartment로 되어 있어서 Bi-amalgam은 자유로이 다닐 수 있으나 전해액은 한쪽에서 다른쪽으로 다니지 못하게 하였다. stirrer로 교반하고 있는 Bi-amalgam의 한쪽은 anode로, 다른쪽은 cathode로 작용 하도록 하였다. refining solution으로 사용한 전해액의 성분은 Bi(ClO₄)와 HClO₄이며, Cathode전류 밀도는 5A-15A/d㎡가 가장 좋았고, 전류 효율은 100%였다. 98% Bi를 사용하여 amalgam refining을 해본 결과 5-9s보다 더 순수한 Bi를 얻을 수 있었다. The electrolytic apparatus was so made as a barrier was immersed in the shallow pool of Bi-amalgam without reaching the cell bottom. Therefore, the Bi-amalgam was permitted to pass freely, but the supernatant solution was not to. The amalgam, agitated with two stirrers, acted as cathode on one side and as anode on the other of the cell. The electrolytes consisting of Bi(ClO₄)₃ and HClO₄ was used as the refining solution. The recommendable cathode C.D. was 5A-15A/d㎡ and the current efficiency was 100%, The amalgam refining by using 98% Bi as anode resulted in obtaining ≥5-9s.