http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이성룡(Sungryong Lee),주한규(Hankyu Joo) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.1A
인터넷의 사용이 증가함에 따라 인터넷을 이용한 전자 상거래, 인터넷 뱅킹 등의 응용 분야가 확장되고 있다. 또한 인터넷에 연결된 많은 컴퓨터들이 분산 처리를 위해 사용될 수도 있다. 전자 상거래에서와 마찬가지로 분산 처리에서도 정보보호의 개념은 매우 중요하다. 인터넷은 누구나 접근 가능하므로 이를 통과하는 자료는 언제든지 누출될 위험이 있다. 따라서 분산 처리 시 인터넷을 통과하는 자료에 기밀성을 줄 필요가 있다. 또한 분산 처리에 사용되는 컴퓨터에 대한 인증과 자료의 무결성을 보장할 수 있는 방법이 필요하다. 인증과 무결성 또한 정보보호 기술을 사용하여 이룰 수 있다. 본 고에서는 단순한 분산처리 시스템에서의 정보보호 기술에 대하여 기술한다.
축류압축기 익형 Stacking 방식변화가 후단 입구유동에 미치는 영향
이성룡(Sungryong Lee),송재욱(Jaewook Song),홍동민(Dongmin Hong),이창용(Changyong Lee),김수용(Sooyong Kim) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.5
This paper presents design and CFD analysis of a transonic compressor rotor with various sweep. The rotor was used to investigate the influence of sweep on performance and stability of a single stage transonic compressor numerically compared with a baseline design with radially stacked blade sections by 3D Navier-Stokes code. It was found that the new rotor with sweep has an increased efficiency and also a much better stall margin which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.
고진공 다이캐스팅 공법을 적용한 알루미늄 트렁크 리드 인너 판넬의 미세 조직 및 기계적 특성
이민재(Minjae Lee),김대업(Daeup Kim),문민석(Minseok Moon),송준혁(Joonhyuk Song),이성룡(Sungryong Lee),강동하(Dongha Kang),김기영(Kiyoung Kim) 한국자동차공학회 2013 한국자동차공학회 부문종합 학술대회 Vol.2013 No.5
High vacuum die casting allows the casting products heat treatable with aid of minimized gas contents. therefore it shows improved mechanical properties. In this study, The weight of manufactured trunk lid inner panel is reduced by 18% with the comparison of steel trunk lid inner panel. To investigate microstructure and inspection defect of the aluminum trunk lid inner panel used optical microscope and computer tomography, blister, respectively. And to evaluate mechanical properties used hardness, tensile, residual stress. The results indicated conventional properties of high vacuum die casting, and there are no definite difference.
이훈(Hoon Lee),서준혁(Junhyuk Seo),이성룡(Sungryong Lee),송재욱(Jaewook Song) 대한기계학회 2016 대한기계학회 춘추학술대회 Vol.2016 No.12
A novel concept of subsonic airfoils, which have low losses and wide operating ranges, has been developed for use in Industrial Gas Turbine. The airfoils are optimized through parametric study for having benefits in high-Reynolds number. The design process is carried out by the in-house airfoil generator and the Quasi-3D blade-to-blade solver. First the solver has been validated using well-known experiments in subsonic compressor cascade. Then, the new airfoils have been designed, which cover a wide range of inlet flow angle, Mach number, and flow turning. It turns out that the new airfoil has a superior performance than typical Circular Arc Airfoils or Control Diffusion Airfoils. This is because the diffusion distribution of the new airfoil in High-Reynolds number is adequately enhanced. It is expected that compressor efficiency and surge margin would be improved, if the Enhanced Diffusion Airfoils are used.